Used Cnc Vertical Machining Centre for sale (66,881)

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle Dcsdpfx Aequhbgodhjn - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,066 h, General Data Machine weight 10500 kg Main Drive Spindle Speed 12000 RPM Spindle motor power 216 kW Number of axis 3 Control Unit Brand HEIDENHAIN Dedex D Iubjpfx Adhjcn Model intc530 Movement X-Axis Movement 1000 mm Z-Axis Movement 550 mm Y-Axis Movement 700 mm This 3-axis Huron KX 10 SP was manufactured in 2004. It features a HEIDENHAIN iTNC 530 control unit, a working range of 1000 x 700 x 550 mm, and a table size of 1200 x 700 mm. The spindle operates at speeds up to 12,000 rpm with a power of 21.6 kW. It includes a 20-tool magazine and has a machine weight of 10,500 kg. If you are looking to get high-quality milling capabilities consider the Huron KX 10 SP machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2002, condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Dsdpfx Adjubyy Nshocn

Condition: used, machine/vehicle number: 008700, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 52 Dcodpfx Aszq Ur Hsdhjn Total number of tool changer positions: 6

Condition: used, Year of construction: 2008, Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible. Dsdezzqbrepfx Adhscn

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Dsdpfexmd Snex Adhjcn Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Djdpfox Aunxjx Adhocn

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 3700 kg Measurements height 2800 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Tool taper BT 40 Number of axis 4 Dimensions Machine Length 2700 mm Table Table load 680 kg Movement X-Axis Movement 762 mm Z-Axis Movement 508 mm Y-Axis Movement 406 mm Tools Max weight 5 kg This 4-axis HAAS VF-2SS-EU vertical machining center was manufactured in 2018. It features a 762 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. Equipped with a BT-40 spindle achieving up to 12,000 rpm and a side-mount tool changer with a 30 + 1 tool capacity. Rapid traverse rates reach 35.6 m/min. Consider the opportunity to buy this HAAS VF-2SS-EU vertical machining center. Contact us for more information about this machine. Dcedpfxsx D D N Ij Adhjn Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 635 mm Y-AXIS TRAVEL: 510 mm Dcedpfx Ajzlu S Nodhen Z-AXIS TRAVEL: 460 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 10000 rpm; 9 - 13 kW; 57 - 83 Nm; SK-40 TABLE SIZE: 790 x 560 mm MAX ADMITTED LOAD: 600 Kg TOOL MAGAZINE: BASKET-TYPE ; 20 POS MAX TOOL DIAMETER: 80 (130) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 6 Kg CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 3650 Kg OVERALL DIMENSIONS: 3375 x 2440 x 2665 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1250 mm Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 750 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 850 mm RAPID FEEDS X-Y-Z: 15 m/min SPINDLE: 4000 rpm; 26 kW; ISO 50 - DIN PALLET: N.2 TABLE SIZE: 650 x 1400 mm MAX ADMITTED LOAD: 1500 Kg HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 41 POS MAX TOOL DIAMETER: 120 (200) mm MAX TOOL LENGHT: 400 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: FANUC 16i-M WEIGHT: 16750 Kg OVERALL DIMENSIONS: 7135 x 5300 x 3426 mm ACCESSORIES: SWARF CONVEYOR ; Djdpfjyvlxkox Adhjcn GEAR BOX

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Dodpfx Asx D Igdjdhjcn Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Dsdpfx Adjwukyqehecn

Condition: as good as new (ex-display), Year of construction: 2025, CMS Taktika Dcjdpfx Aswd Ichsdhsn Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.100 mm Max. Glas-height: 2.000 mm Min. Glas-length: 320 mm Min. Glas-height: 220 mm Thickness: 4-15 mm Options: - 2x groups of suction cups which 2 suction cups on each group - 2x Elektrospindle 6 kW 0-12.000 U/Min - Tool Magazin with 12 slots - Additional drilling from the backside - CAD/CAM - central lubrification

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Dcsdpfx Ajzgvlyedhjn

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Dedpfx Aowuz Ekodhjcn Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Year of construction: 2008, condition: good (used), Parts shown by hand not included. Djdpopmtzhofx Adhscn 12.000 rpm X 610 mm Y 420 mm Z 450 mm

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 6800 kg Measurements height 2808 mm Dimensions Machine Length 2929 mm Table Table load 1200 kg Main Drive Number of axis 3 Dcsdpfsx E Edxox Adhjn Spindle Speed 12000 RPM Spindle motor power 18.5 kW Movement X-Axis Movement 1050 mm Z-Axis Movement 510 mm Y-Axis Movement 530 mm Tools Max weight 8 kg This 3-axis Mazak VCS 530C vertical machining centre was manufactured in 2014. It features a table size of 1300x550 mm, X/Y/Z travels of 1050/530/510 mm, and a maximum spindle speed of 12000 min⁻¹. The machine supports a table load up to 1200 kg and includes a 30-tool magazine with a rapid tool change time of 2.8 seconds. Consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2004, condition: ready for operation (used), A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible. Dcsdpfoygmdbex Adhon

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Späneförderer , Bandfilteranlage Dsdegb Rq Sopfx Adhocn

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/450mm/400mm, tool holder: CAT50, table size X/Y: 900mm/410mm, max. table load: 350kg, speed: 8000rpm, feed X/Y/Z: 15000mm/min, rapid traverse X/Y/Z: 30000mm/min, number of tools: 20, dimensions X/Y/Z: approx. 2200mm/3200mm/2500mm, weight: approx. 5000kg, control: Seicos A10M. Djdpfx Ajtufb Sedhscn

Condition: good (used), Parts shown by hand not come. Dodpjzki Rkofx Adhjcn SK 40 ,30 tool places in tool changer.

Condition: used, machine/vehicle number: 008647, X axis working area: 3650 mm Y axis working area: 1500 mm Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 26 Total number of tool changer positions: 12 Dcjdpfx Adjzdquwjhen

Condition: used, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, total length: 3,600 mm, total width: 2,200 mm, table width: 450 mm, table length: 710 mm, SPINNER MC650 CNC Vertical machining centre X - Travel 650 mm Y - Travel 450 mm Z - Travel 450 mm Table Length 710 mm Dcsdpszimhkjfx Adhsn Table Width 450 mm Length 3600 mm Width 2200 mm Height 3000 mm Weight 9500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. Dcsdju Dw I Ejpfx Adhjn - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 Dedpjyybpmjfx Adhocn C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000