Used Cnc Turret Punch Press for sale (34,250)

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Hjdpfx Aetva Dnsg Usng

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm distance between the uprights: 2700 mm Hsdpfxomkhyns Ag Usng MACHINE DETAILS weight: 11.000 kg space requirement: 3720 x 2180 x 3170 mm

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Hedpou Au U Tefx Ag Usng Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,676 h, machine/vehicle number: KM-1148, laser power: 3,200 W, punching force: 22 t, punching diameter: 76 mm, sheet thickness (max.): 8 mm, workpiece weight (max.): 230 kg, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Hodpfjv Am Twjx Ag Ueng Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: excellent (used), Year of manufacture: 2002 Overhaul: 2010 Type: CNC 607GK Control: Eckelmann (PC control) Operating hours: 14,136 h Table: 718 x 680 mm Travel x-y-z: 780 – 620 – 360 mm Spindle mount: HSK 63F Hodowhwwiepfx Ag Uong Speed: up to 24,000 rpm Feed rate: up to 8,000 mm/min Accessories: Spindle cooling Condition: Good Suitability: Machine is particularly suitable for light machining and for aluminum and wood Power supply: 20 kW Machine dimensions: 1,700 x 3,000 x 2,500 mm Weight: 1.6 t

Condition: used, Technical specifications: Max bending length: 4,100 mm Bending force: 400 Ton Maximum operating pressure: 300 Bar Hnjdsxw T Sfopfx Ag Usg Approximate weight: 24,000 kg Minimum distance between photocell barriers and tools: 180 mm Motor power: 30 kW CNC control: Esa Machine compliant with CE standards.

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Hnedpfx Agewhp Ndj Uog

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 97,000 h, laser power: 2,500 W, sheet thickness (max.): 6 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,500 mm, Submission of a bid obligates the buyer to collect the machine on time by 05/09/2025! The machine has been serviced by the manufacturer. TECHNICAL SPECIFICATIONS Power and Cutting Force Cutting force: 300 kN Power: 2.5 kW (CO₂) Workpiece Cutting elements to length: 3,020 × 1,500 mm Laser cutting length: 2,000 × 1,500 mm Max. sheet thickness: 6 mm Stations Turret station: 41 fixed and 4 rotatable stations MACHINE DETAILS Electrical Data Connected load: 400 V / 68.3 kVA Apparent power: 60 kVA Compressed Air Connection Compressed air connection: 8 bar Compressed air consumption: 48 m³/h Occupational Safety Width of protected area: 30 m Hsdsw Axa Uopfx Ag Uong Minimum safety distance: 1.36 m Machine reaction time + total fire protection wall reaction time: 320 ms Overrun time: 300 ms Machine braking distance: 180 mm Weight of the punching/laser machine: 30,000 kg EQUIPMENT Automatic part removal (suction cups) up to 45 kg Automatic sheet metal feed max. 3,050 × 1,500 mm Automatic bale output 1,500 × 400 mm Double loading ramp Light barrier Wire cutting kit Bale push sensor Chip extraction Conveyor for offcuts removal Separate lubrication for punching and threading tools Sheet bending sensors Punches included in the offer Loading of the machine can be arranged upon request. A large tooling package can be purchased for an additional 10,000 EUR.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 545 h, machine/vehicle number: 160826, working width: 3,050 mm, table height: 800 mm, pressing force: 175 t, TECHNICAL DETAILS Working width: 3,050 mm Table height: 800 mm Press force: 175 t Upper/lower tool weight: 11 / 16 kg MACHINE DETAILS Total weight: 10.25 t Overall height: 2,900 mm Overall length: 4,200 mm Hnedewq Ry Nspfx Ag Uog Overall width: 1,850 mm EQUIPMENT - Emergency stop switch - Bending tool included in the new price of approx. €20,000

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Hjdpev S Ad Rofx Ag Usng Useful bending length: mm 4050. Power exerted: Ton 200. Front safety devices: DSP LASER. Weight: kg 24,000.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 403/FL06, laser power: 2,000 W, laser wavelength: 1,070 nm, punching force: 28 t, punching diameter: 105 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,100 mm, table width: 4,250 mm, table height: 900 mm, No reserve price - guaranteed sale at the highest bid! Machine was overhauled by Boschert in 2022! TECHNICAL DETAILS Punching force: approx. 2 x 280 kN (28 t) Punching throat: approx. 1,750 mm Max. punching diameter: 105 mm (any shape within 105 mm) Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm (continuously programmable) Thread cutting: M3 - M12 Slide stroke: 160 mm Stroke rate (for sheet thickness 2 mm) Travel path 0.1 mm: 280 strokes/min (385 with fast hydraulics) Travel path 2.0 mm: 200 strokes/min (275 with fast hydraulics) Travel path 25.0 mm: 125 strokes/min (175 with fast hydraulics) Table dimensions Table width left + right: 4,250 mm / 3,250 mm Table depth: 3,100 mm Table height: 900 mm Laser source Model: XFocus 2000 Max. connected load: 7 kVA (100% duty cycle) Operating temperature: 5 - 40 °C (store frost-free) Air humidity: 10–95% Storage temperature: -40 - 75 °C (without water) Laser protection class: Class 4 according to DIN EN 60825-1 Sheet thicknesses Hjdpfx Asvwbrwjg Ujng Mild steel (maximum): 15 mm Mild steel (recommended): 0.5 - 10 mm Alloyed steel (maximum): 8 mm Alloyed steel (recommended): 0.3 - 6 mm Aluminum (maximum): 6 mm Aluminum (recommended): 0.3 - 4 mm Fiber laser Output power: 2,000 W Wavelength: 1,070 nm (± 10 nm) Modulation rate: 5 kHz Pilot laser power: < 1.0 mW Optical fiber: fiber cross-section 100 µm Cooler Max. connected load: 9 kVA Number of cooling circuits: 2 Design point: 33 °C Air volume: 4,000 m³/h Temperature range (operation): 10 - 40 °C (store frost-free) Storage temperature: -40 - 64 °C (without water) Coolant: DI water Pressure: max. 2 bar Flow rate: laser cooling circuit 28 l/min, head circuit 2 l/min Coolant water temperature: laser 21 °C (± 1 K), head 25 °C (± 1 K) Cooling capacity: 5.5 kW Dimensions (L x W x H): 626 x 807 x 1,362 mm Mass: 340 kg (without water filling) MACHINE DETAILS Overall width: 6,500 mm Overall depth: 5,000 mm Overall height: 2,100 mm Drive power: 20 kVA (25 kVA with fast hydraulics) Machine weight: 16,200 kg Hydraulic oil filling: 115 l (160 l with fast hydraulics) Laser dimensions (L x W x H): 1,250 x 810 x 1,500 mm Laser mass: approx. 300 kg

Condition: new, Year of construction: 2025, control type: CNC control, bending force (max.): 63 t, working width: 2,000 mm, travel distance X-axis: 550 mm, back gauge adjustment: CNC-controlled, back gauge: 550 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Brand new 3-axis CNC-controlled press brake with automatic bending angle calculation and color graphics. Maximum pressing force: 630 kN = 4 mm steel sheet S235jr bent along the entire bending length with a V-width of 36 mm Maximum bending length: 2,000 mm Distance between side frames: 1,320 mm Throat depth in side frames: 250 mm Ram stroke length: 100 mm Maximum installation height: 320 mm Hsdpjxdiyrofx Ag Usng Ram travel speed downwards: 50/6 mm/sec, upwards: 60 mm/sec Table width: 160 mm Back gauge adjustment range: 550 mm Oil tank capacity: 250 liters Dimensions approximately 2.6 x 1.5 m x height 2.4 m Drive power: 5.5 kW Weight: approx. 3,500 kg Equipment: - Die block - Bending punch

Year of construction: 1996, condition: ready for operation (used), Pressing force: 1200kN, working width: 4100mm, stand distance: 3550mm, table width: 215mm, throat depth: 400mm, stroke: 800mm, working speed: 80mm/s, power: 11kW, weight: approx. 12000kg. An on-site inspection is possible. Hsdpfx Agoumwh Ne Uong

Condition: good (used), turning diameter: 5,000 mm, travel distance Z-axis: 2,000 mm, turning length: 2,500 mm, The machine is in good technical condition, fully functional, modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5000 mm and a clamping plate diameter of 2500 mm. The workpiece weight is 40 tons and the height is 2000 mm. Hnedpfx Asv Dkykog Uog

Year of construction: 2017, operating hours: 80 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: B3070, little used press brake TECHNICAL DETAILS pressing force: 290 t working length: 3100 mm distance between columns: 2550 mm working height: 400 mm Opening width: 515 mm Control system: Cybelec DNC 60 stroke: 250 mm table width: 80 - 220 mm speed: 0 - 150 mm/s pressing speed: 0 - 10 mm/s reset speed: 0 - 120 mm/s Hodpfx Agomidm To Ueng MACHINE DETAILS hydraulic pressure: 275 bar Machine power: 18,5 kW machine length: 4900 mm Machine width: 1935 mm Machine height: 2890 mm Machine weight: 20.500 kg EQUIPMENT - 1 x tool 30, 5 x 104 mm, 1000 kN/m - 3 x tool 30, 5 x 104 mm, 1000 kN/m - 1 x tool 88, 3 x 103.5 mm, 500 kN/m - 3 x tool 88, 3 x 103.5 mm, 500 kN/m - 1 x Matrix 85, V 80 mm, H 80 mm, W 95 mm - 3 x Matrix 85, 5 x 104 mm, 1000 kN/m - 1 x Matrix 85, V 40 mm, H 60 mm, W 60 mm - 3 x Matrix 85, V 40 mm, H 60 mm, W 60 mm - 1 x Matrix 88, 16 x 120 mm, 1000 kN/m - 3 x Matrix 88, 16 x 120 mm, 1000 kN/m

Condition: ready for operation (used), VTL MORANDO KL 12 CNC Fagor 8040 Faceplate diameter: 1200 mm Swing diameter: 1400 mm Turning height: 1080 mm Main motor: 40 kW Total power requirement: 50 kW Weight of the machine ca.: 18 t Movie underpower available Hnodpfx Aetvv Sqeg Ueg

Condition: new, Year of construction: 2024, punching force: 55 t, PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : YOUR QUESTION DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch Cy7Od27J0W - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø22 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set HOLE PUNCH HKM 55 Diameter Ø Ø 20 x 20 mm at maximum thickness Diameter x thickness (xt) Ø 40 x 10 mm Thickness at maximum diameter Ø 100 x 3 mm Work course 60 mm Number of courses x 25 Groove depth 255 mm Working height 1030 mm FULL MATERIAL SHEAR HKM 55 Round / quadrangular Ø 40- 40 mm ANGLE IRON HKM 55 CUTTING SCISSOR Upright angle (90°) 120 x 120 x 12 mm Angle bracket (45°) 70 x 10 mm Working height 1130 mm SHEET METAL SHEARS (BLADE CUTTING) HKM 55 Flat sheet 200 x 20 mm Flat sheet 300 x 15 mm Blade length 317 mm Angle cut 80 x 15 mm Working height 900 mm NOTCHING HKM 55 Material thickness 10 mm Width 45 mm Depth 90 mm Working height 900 mm SPECIAL MOLDS HKM 55 U-I profile knives (UPN - IPN cut 120 x 58 mm T profile blades 80 x 9 mm Special notch set 100 x 100 x 10 mm Hnjdpfxovg D Nks Ag Usg V crimping 250 x 12 mm Maximum llama crimping V crimping 500x3 mm Sheet metal bending maximum Punch at notch 125 mm Jaw depth Punch Ø 38 x8 mm in the notch section Sheet metal bending maximum TECHNICAL SPECIFICATIONS HKM 55 Engine power 5. 5 kW Weight 1520 kg Machine dimensions (LxWxH) 1500x950x1880 mm Pressure 55 tons

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Hsdewxb Igopfx Ag Uong

Condition: new, Year of construction: 2024, punching force: 85 t, power: 7.5 kW (10.20 HP), PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : INQUIRY DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : Hnedpjvfyngofx Ag Uog - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø22 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set TECHNICAL SPECIFICATIONS : Ton 85. Engine power Kw 7.5 Dimensions: mm 1,920 x 950 x 2,040 (L x W x H). Weight: 2.315 Kg: 2.315 Kg DRILLING Drilling capacity: mm Ø 33 x Thickness 20 mm. Indentation depth: mm 355. Drilling stroke: mm 80. Working height: mm 1,080. CUTTING: Sheets: mm 380 x 20. mm 480 x 15. Blade length: mm 482. Round bars: mm Ø 50. Square bars: mm 50. 90° corner profiles: 150 x 150 x 15 mm. 45° angle profiles: mm 80 x 8. SPRAYING: Max thickness: mm 13. Width: mm 52. Depth: mm 100. Working height: mm 940.

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Hnsdpfsu N Hc Njx Ag Uog

Condition: new, Year of construction: 2024, punching force: 115 t, power: 11 kW (14.96 HP), PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : YOUR QUESTION DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø26 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set TECHNICAL SPECIFICATIONS : Hsdpovfynmjfx Ag Uong Drilling force115 t Extension355 mm Stroke80 mm Strokes per min. (with 20 mm stroke)25Sheet thickness (max.))Ø 34 x 26 mm Working height935 mm Cutting capacity600 x 15 mm380 x 25 mm Steel angle 45° (1 foot)80 x 80 x 10 mmSteel angle 90°150 x 150 x 150 x 16 mm Blade length610 mmRound55 mmSquare50 mm Material thickness13 mm Width2,040 mmDepth950 mm Engine power11.0 Kw Mains voltage400 V50 Hz Height2,180 mm Weight2,920 kg

Year of construction: 1995, condition: ready for operation (used), A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible. Hodpfowftdgox Ag Ujng

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Hnjdpfx Agewm Nn Re Usg

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Hnsdpfot Amdrex Ag Uog

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Hsdpfx Agsw N Shks Ujng