Automatic Punching Press

BRUDERER BSTA 25

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Gkjdpfxoyktftj Amyjb Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Gksdpfx Aeznniaemyeb Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Nominal capacity: 250 kN, 25 tons Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Godjyrf Aaspfx Amyjkb Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min total power requirement 20 kW Gkjdpfxovu E I Ds Amyob

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Gksdpfx Amjzguh Heyob Hurco MAX 5 control with WinMax software

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, stroke length: 38 mm, input voltage: 400 V, punching force: 25 t, Bruderer BSTA 25USL with BBV 190/85 roll feed, - year of mfg. 2000 - Tool area 750mm - Adjustable stroke 13 to 38mm - complete documentation - Soundproof cabin - Machine checked, in very good condition! contact us! Gkjdezlqhyjpfx Amyeb

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: D12L/8263, Offer Number: D12L/8263 Machinetype: wire nail press Make: WAFIOS Type: N90 Constr. year: 1997 diameter range: 2,0-4,0 mm Gsdjwi Tg Aspfx Amyjkb nail length: 50-100 mm output - pieces/min: 800 Location: In our warehouse

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM Gkedevwgl Nopfx Amyeb nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: good (used), Year of construction: 2003, pad printing machine, NIR POWER TC 24, year: 2003, Preis: 1.900 Euro, price: Mr. Rainer Eckerle Gsdod Ai Hkepfx Amyjkb

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Gkjdpopag R Rjfx Amyob Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT