Used Cnc Saw Steel Bl Group for sale (35,169)

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Iedpfxjx R U Epo Aateif Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Iiodpfx Aaoxdc T Setsf

Year of construction: 1999, condition: ready for operation (used), Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg. Ijdpotufcdofx Aatoif

Year of construction: 2003, condition: ready for operation (used), A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible. Iodpfxoycwrhe Aatoif

Year of construction: 2013, condition: ready for operation (used), Saw blade dimensions: 41mm x 5100mm, max. cutting diameter: 350mm, dimensions X/Y/Z: 4400mm/1800mm/2000mm, weight: approx. 2400kg. Iisdpjtufcaefx Aatef

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Iiedpfxjy Nm Umj Aatof

Condition: used, Used Wolfking model 100 L BL stainless steel twin-shaft ribbon mixer. - Manufacturer: Wolfking - Model: 100 L BL - Total volume: 110 litre (approximately) Isdpfx Aszunvyoatoif - Mixing chamber dimensions: 770 mm x 501 mm x 305 height mm (approximately) - Type of agitators: Twin uninterrupted ribbons - Dimensions of agitators: diameter 290 mm x 770 mm long (approximately) - Drive: 0.75 kW, 220/380 V, 1400 rpm (belt driven through gearbox) - Includes: Control panel

Condition: excellent (used), Year of construction: 2016, operating hours: 4,742 h, "RSA High-Performance Sawing, Deburring, Cleaning, and Drying Center" for Steel Tubes The processing center consists of: 1) RSA Precision High-Speed Saw RASACUT SC 3000 with bundle loader 2) RSA transfer system between the RSA Precision High-Speed Saw RASACUT and the RSA Deburring System RASAPLAN XY 3000 3) RSA Deburring System RASAPLAN XY 3000 4) Extraction system/wet separator for the RSA Deburring System RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for tubes up to 6,200 mm TECHNICAL DATA Tube diameter: 6 mm to 55 mm Wall thickness: 1 - 6 mm Bar weight: max. 10 kg/m Material: steel Magnetism: max. 3 Gauss Output length: 6,200 mm Sawable lengths: 150 - 3,000 mm Restriction: Ø 6 – 7.9 mm max. length: 1,200 mm Iiedpfoy E Iypox Aatof Ø 8 – 9.9 mm max. length: 1,500 mm Ø 10 – 12 mm max. length: 2,000 mm Length tolerance: Ø 6 - 49 mm +/- 0.2; Ø 50 - 55 mm +/- 0.25 SAW BLADE DATA Saw blade diameter: max. 315 mm Bore: 40 mm Auxiliary holes: 4 x 12 mm Pitch circle: 64 mm NEW PRICE: €390,000

Year of construction: 2018, condition: used, functionality: unexamined, Sasso K500 CNC bridge saw (2018) Iiodpfx Aozc Rgrsatef 3 axis Also available from the same location - Bellani Modulo edge polisher (2010)

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Iedpfox Ruudox Aateif Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. Iodpfx Aev U Ea Hsatoif VACAM CNC Control. Short piece removal.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Iisdpfxsvpafyo Aatef Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. Iiedpfxsxmvnue Aatof 1000mm Section Capacity.

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Iiodpfxex N Iclo Aatjf Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers. Iodpfxsx Rut Te Aatsif

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Iijdpjy R Tk Rofx Aatef Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Iodpfxoig T Amo Aatsif Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Year of construction: 2007, condition: excellent (used), 603 LBH Technical Description Ijdpfxol Si Uue Aatjif Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 max.mm 610 x 310 • Sawing capacity at 45° mm 400 x 310 • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 76020, travel distance X-axis: 3,800 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 320 mm, table width: 2,400 mm, table length: 3,800 mm, Breton Genya is the advanced cnc bridge saw for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen tops, vanity tops or claddings. Ijdpfezrfadox Aatoif The indicated price does not include disassembly and subsequent installation costs.

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm Isdjzc I Iyjpfx Aatjif capacity 45 degrees: flat: 750 (670) x 510 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. Ijdpfxozcqmxj Aateif 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Drilling spindle speed range 100 - 2500 rpm Drilling spindle drive power x 15 kW Total drill length. 160 - 460 mm Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Number of drill axes: 3 KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Condition: used, Year of construction: 2018, Minimum sawing capacity (90 gr.) 80 x 10 mm Isdpezh Exrsfx Aatoif Max. sawing capacity (90 gr.) 1100 x 510 mm Max. sawing capacity (45 gr.) 710 x 510 mm Max. sawing capacity (60 gr.) 460 x 510 mm Saw band size 9920 x 54 x 1,6 mm Max. saw band speed 60-170 m/min Control: Mitrol Pegaso 3.6.0 Equipped with: Various in/out feed rolls

Condition: used, Year of construction: 2009, operating hours: 9,203 h, 2009 | MAN TGS 26.320 6x2-2 BL with Oil Steel Eagle 3526 (35m) | Used Truck-Mounted Boom Lift | 9203 hours | 115506 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 67500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 62 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: When the truck is stationary for a long period, it sinks and has to be manually lifted to get it out of its alarm state; swapping the relays also works. The truck has not been tested on the road, there were electrical problems with the boom lift which were resolved during inspection. The machine is very sensitive to malfunctions, and a 24V emergency pump has been additionally installed. The truck has low mileage, otherwise, it is a functioning machine. It has recently been serviced by Oil Steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38953 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Iijdpfxjydf Hpe Aatjf ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, CNC double-head mitre saw equipped with Ø 600 mm saw blades, designed for precise and automated cutting of profiles. The machine features a robust electro-welded steel base and consists of one fixed cutting unit and one mobile cutting unit with electronic positioning along the X-axis. Both cutting heads are equipped with controlled rotary axes (RF and RM), allowing automatic positioning of the cutting units at angles ranging from 45° inward to 20° outward. The saw blades are operated by hydro-pneumatic cylinders, with adjustable feed speed and rapid return. Main features: CNC double-head mitre saw Ø 600 mm saw blades One fixed and one mobile cutting unit Electronic positioning of the mobile unit – X-axis Controlled rotation of both cutting heads – RF and RM axes Cutting angle range: 45° inward to 20° outward Hydro-pneumatic blade feed Adjustable blade feed speed Rapid blade return Horizontal clamping system with double cylinders Vertical profile clamping system Pneumatically operated safety guards for the cutting areas 15” touch-screen monitor Windows 10 platform Programming and management of cutting operations via touch-screen interface Iiodpfx Aaeztb Hpotsf Provision for an industrial label printer for workpiece identification and association with the corresponding production order The machine is designed to provide precision, productivity and ease of operation, and can be easily integrated into the production process.

Condition: used, Industrial Twin-Column Band Saw with Roller Conveyor System, KALTENBACH KBS 920 DG, Used machine Manufacturer: KALTENBACH GmbH + Co. KG (Lörrach, Germany) – Market leader in premium steel processing machinery Type: KBS 920 DG Year of manufacture: 2002 (The machine's software has been updated, and compared to its age, it has been retrofitted with a newer PLC and conveyor control system) Condition: Used, in excellent technical condition, fully operational complete sawing line Overall dimensions: (According to the complete conveyor and machine layout) Technical and operating parameters: Cutting capacity at 90° (Width x Height): Max. 920 x 500 mm (ideal for large HEA, HEB, IPE beams) Cutting capacity at 60°: 820 x 500 mm Cutting capacity at 45°: 670 x 500 mm Iiodpfjzl Ugajx Aatjf Mitre cutting range: Infinitely adjustable in both directions (NC-controlled angle setting) Saw band dimensions: 7290 x 41 x 1.3 mm Band speed: Infinitely variable (frequency-controlled) Saw frame feed: Hydraulically controlled, infinitely variable adjustment Material clamping: Horizontal and vertical hydraulic vice system ensuring vibration-free clamping during cutting Control system: Modernized, upgraded software program and PLC control system relative to its age Integrated Material Handling Roller Conveyor System: Infeed roller conveyor: 28 meters long, automatic feeding into the saw, with full longitudinal and transverse movement (equipped with lateral chain/roller cross-transfer units for loading raw materials) Outfeed roller conveyor: 19 meters long, automatic discharge of cut finished products, with full longitudinal and transverse movement for lateral buffering and sorting of finished parts