Used Cnc Milling Center for sale (24,081)

Condition: good (used), Year of construction: 2021, functionality: fully functional, Fanuc control, 66 mm spindle bore, two turrets, two Y-axes, sub spindle, parts catcher, short bar loader, high-pressure pumps, tool holders. Csdpfxjycwwws Agzegp

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm T1, T2=105.0 mm B AXIS: 113.0 mm MACHINE DIMS 1500 x 980 x 1500 mm Cgsdpfxowidy To Agzop MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm Cjdpfx Aev N D Rtegzegp TURRET 12 STATIONS TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: used, MAZAK A12 MEGA TURN CNC ELEVATING RAIL VERTICAL BORER MAKE MAZAK, MADE IN JAPAN MODEL A12 MEGA TURN YEAR LATE 1980 s CONTROL FANUC 6 TB TABLE DIA 1250.0 mm MAX SWING 1450.0 mm MAX CUTTING HEIGHT 1150.0 mm TABLE SPEED 1 - 350 RPM ATC 16 STATIONS PLUS 4 TABLE JAWS TOOL HOLDERS Cgedpov N Ek Ujfx Agzsp SWARF CONVEYOR COOLANT SYSTEM GUARDING

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Codpfx Aox Atyajgzogp Tool cabinet and cutting tools not come. Only tool holders will come.

Condition: ready for operation (used), Year of construction: 1996, A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible. Cgsdpfx Agjwk Nlwszjp

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Cedjx Ih Dgjpfx Agzogp

Year of construction: 2020, condition: ready for operation (used), X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: 6000/min, i=1:1, raised design with center distance 85mm, 1x cut-off holder, rotation direction universal, external coolant. Regularly maintained, maintenance records available, an on-site inspection is possible. Cjdpfxew Sxx Uo Agzjgp

Year of construction: 2009, condition: ready for operation (used), A CNC universal turning and milling machine DMG Mori is available. Travel X/Z: 160mm/450mm, turning diameter over bed/face slide: 330mm/260mm, distance between centers: 450mm, chuck diameter: 210mm, speed: 5000rpm, spindle power: 16.5kW/11kW, tool positions: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2000mm/1800mm, weight: approx. 3500kg, operating hours: 18127h. Dokumentation vorhanden. On-site inspection is possible. Cgedpfx Agjygmcqozjp

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Cgjdpfx Agew Dfhuszop

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Cgedpfswbuyzsx Agzjp

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Cedpfx Agju T Rgkjzogp

Year of construction: 2004, condition: ready for operation (used), A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Codpfx Agswmdv Aozogp

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Codpfx Agev I U Iyszsgp

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Codpfxoxf Iklj Agzsgp

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 400 mm, turning diameter: 370 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 480 mm, rotational speed (max.): 20,000 rpm, bar passage: 65 mm, total height: 2,670 mm, total length: 3,810 mm, chuck outer diameter: 200 mm, total width: 2,900 mm, bar diameter (max.): 65 mm, spindle nose: Capto C5, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, 🔹 For Sale: 2010 Mori Seiki NT1000SZM Mill Turn Centre – Excellent Condition – Ireland 🔹 Make: Mori Seiki Model: NT1000SZM Year: 2010 Control: MSX-711IV Machine Type: CNC Mill Turn Centre (Tool Spindle, Main Spindle, Sub Spindle, Lower Turret) Condition: Excellent Location: Ireland Availability: Immediate Csdpfxetwyc Sj Agzegp 📌 Description: Available for sale is a Mori Seiki NT1000SZM Mill Turn Centre, a premium multi-tasking CNC machine in excellent condition with only 16,520 cutting hours. Featuring a high-speed 20,000 rpm milling spindle, dual spindles, lower turret, and simultaneous 5-axis capability, this machine is ideal for advanced and precise mill-turn operations in the aerospace, medical, and high-precision engineering sectors. This machine is comprehensively equipped and designed to handle complex, multi-sided machining with reduced setups and high throughput. High-spec 5-axis Mori Seiki NT1000SZM Mill Turn Centre with 20,000rpm spindle, sub spindle & turret. In excellent condition. 🧰 Included Equipment: Kitagawa 5" Chuck (Sub Spindle) Kitagawa 8" Hollow Chuck (Main Spindle) Full Selection of Tool Holders (as seen in videos) Swarf Conveyor 70 Bar High Pressure Coolant System Air Blow for Main Chuck and Tool Tip Tool Presetter (Tool Spindle & Turret 2) Workpiece Conveyor (Bar Feeder Spec) Bar Feed Interface Tool and Workpiece Counters Signal Tower Double Foot Switch for Both Spindles Part Program Storage (1MB) with 1000 Registerable Programs Knoll Compact Filter Unit Double-Wound Transformer 🔧 Technical Specifications: 🔹 Turning Capacity: Max Turning Diameter: 370 mm Max Turning Length: 400 mm Bar Work Capacity: 65 mm Main Spindle Through-Hole: 73 mm 🔹 Spindles: Main Spindle Speed: Up to 6,000 rpm Sub Spindle Included Spindle Drive Motor: 11/7.5 kW 🔹 Milling Tool Spindle: Max Speed: 20,000 rpm Taper: Capto C5 Tool Spindle Drive Motor: 9/5.5 kW X Axis Travel: 380 mm Y Axis Travel: 210 mm Z Axis Travel: 480 mm B Axis Tilt: ±120° C Axis: 360° 🔹 Tooling System: ATC Capacity: 76 Tools Max Tool Diameter: 130 mm Max Tool Weight: 5 kg 🔹 Dimensions & Weight: Machine Dimensions: 3810 x 2895 x 2670 mm Machine Weight: 8,500 kg ✅ Highlights: Advanced 5-Axis Mill-Turn with B-Axis Head Powerful and Flexible Dual-Spindle Configuration High-Speed Tool Spindle (20,000 rpm) with Capto C5 Fully tooled with coolant system, filters, tool holders, and more In-machine tool setting and bar feed ready Ideal for high-precision, high-complexity parts 📈 Perfect For: Aerospace machining Medical device manufacturing Precision mechanical components High-mix, low-volume or complex geometry parts CNC Mill Turn for Sale Ireland, Used Mori Seiki NT1000SZM, 5-Axis CNC Turning Centre, High-Speed Milling Lathe, CNC Machine with Sub Spindle and B Axis, Capto C5 Mill Turn, Precision Mill Turn Centre for Sale, Dual Spindle CNC Lathe with Milling

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h Codpfx Agjydvfcezegp turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Large Emco and Index machine package for sale! For sale is a lot of 4 lathes, including ALL tool holders and clamping devices! - 1 x Emco 665 MC Plus with sub-spindle and 2 turrets, year 2006, including 4-meter FMB Turbo 8-80 bar feeder, year 2006 - 1 x Emco 332 Big Bore with sub-spindle and 2 turrets, year 2001, including 3-meter FMB 5-55 Turbo bar feeder, year 2016 - 1 x Emco 365 with sub-spindle and one turret, year 1997, including FMB short bar loader SL80 / 1200 / B, year 2006 (This loader was rarely used because the machine mainly served as a manual loading machine! The loader is currently stored on a shelf and has seen little use!) - 1 x Index GU 1400 (large bore) year 1988, with tailstock and steady rest (A lot of upgrades last year, e.g., new ballscrew... we currently machine precision fit parts on it daily.) All machines are in daily operation and can be inspected under power. All machines have been operated in single-shift operation. Csdpsyifnhefx Agzegp Since we are selling all lathes as part of a system changeover, this package includes a huge quantity of tool holders, clamping equipment (for all machines), and bar feed technology for all feeders — too extensive to list here! The entire machine package is offered including dismantling and loaded free onto customer's truck. This means there are no additional costs for dismantling and loading!

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) Cgsdpfx Agjx E Dncjzsp • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: new, Year of construction: 2024, • CNC Lathe Hwacheon SMC 180 with Sub-Spindle Brand New!!!! • Control: Fanuc 0i-TF with Manual Guide I • Rapid traverse X / Z / B: • 36 / 36 / 36 m/min • Max. turning diameter: Ø 300 mm • Max. turning length: 528 mm Cgjdpfx Agjyinklozsp • Chuck size: • 6” / Ø 150 mm, 5” / Ø 120 mm • Max. spindle speed: • Main spindle 6,000 rpm • Sub-spindle 6,000 rpm • Bar capacity: Ø 51 / 32 mm • Main/sub-spindle motor power: • 11 / 15 kW, 3.7 / 5.5 kW • Tool turret with 12 stations, all stations driven • 5,000 rpm 3.7 / 5.5 kW • Heavy-duty one-piece slant bed made of stabilized Meehanite cast iron, with precision linear guides on all axes • High-performance spindles with A2-5 / sub A2-4 spindle nose • Automatic tool measurement arm • Parts catcher • Full enclosure • Hydraulic system • Coolant unit with retractable tank, 6 bar pump included • Ergonomic swiveling control panel • Electronic handwheel • Waterproof LED work area lighting • Hinged belt chip conveyor with 1,200 mm discharge • Foundation bolts and machine base plates

Condition: like new (used), Year of construction: 2024, • Control: Fanuc 0i-TF Plus LCD with Manual Guide I Cgedpfxsyik Rus Agzep • Rapid traverse X / Z / B: 36 / 36 / 36 m/min • Y-axis travel: + / - 55mm • Max. turning diameter: Ø 300mm • Max. turning length: 478.5mm • Chuck size: 6” / Ø 150mm, 5” / Ø 120mm • Max. spindle speed: Main spindle 6,000 rpm / Sub spindle 6,000 rpm • Bar capacity: Ø 51 / 32mm • Main/Sub spindle motor power: 11 / 15 kW, 3.7 / 5.5 kW • Tool turret with 12 stations, all driven • 5,000 rpm 3.7 / 5.5 kW • Robust machine one-piece slant bed in stabilized Meehanite cast-iron with precision linear guides on all axes • High-performance spindles with spindle nose A2-5 / Sub A2-4 • Automatic tool measuring arm • Parts catcher • Fully enclosed guarding • Hydraulic unit • Coolant system with extendable tank, 6 bar pump • Ergonomic, swiveling control panel • Electronic handwheel • Waterproof LED work area lighting • Transformer

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Cgjdpfxer Ak S Nj Agzep Sinumerik 840D Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 6,000 rpm, bar passage: 32 mm, overall weight: 3,800 kg, 32 mm-5 axis Swiss Cnc lathe with moving bushing - Iemca Boss 332E barfeed new in 2008 - Syntec Control Cgsdpetxq Emefx Agzep

Condition: new, Year of construction: 2022, functionality: fully functional, The tool holder is completely new and still in its original packaging. There is a second one, which is used but shows no signs of wear. (see picture) Spindle MTSK-40 Gear ratio 1:1 Cedpfx Agsuzwutezjgp Max rpm. 6000 Maximum torque [Nm] 50 External cooling Yes Internal cooling Yes Internal cooling P=30 BAR The holder can also be used for the following CMZ machines. CMZ - TA15M/Y/MS/MY/YS 15 PCS. CMZ - TX52 Y2 QUATTRO CMZ - TX52 Y2 TWIN CMZ - TX66 Y2 QUATTRO CMZ - TX66 Y2 TWIN CMZ - TX66 Y3 CMZ - TA20M/Y/MS/MY/YS 15 PCS. CMZ - TA25M/Y/MS/MY/YS 15 PCS. CMZ - TA30M/Y/MS/MY/YS 15 PCS. CMZ - TTL 52 CMZ - TTL 66 CMZ - TX52 Y3

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Cgsdpou U R E Ajfx Agzjp