Used Cnc Laser Cutting System for sale (48,381)

Year of construction: 2010, condition: ready for operation (used), A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2021. Documentation available. An on-site inspection is possible. Hedpfxoyviyrs Ad Ron

Year of construction: 2008, condition: ready for operation (used), A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026. Hsdpoyu T D Refx Ad Rsn

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm / 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Hsdpfxoxp Iw Ho Ad Ren Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Maximum Position Resolution: 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min warmup): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing, with varioSCAN): (433 x 268 x 266) mm³ Beam Offset: 72.72 mm Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (upon arrangement) or local pickup possible. Feel free to contact us by phone for further questions.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Hjdpfx Ajxp Iybsd Rsn Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Hedpfoy N Nm Sex Ad Ren Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm With loading and unloading system for the sheets

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: DC, table length: 600 mm, table width: 600 mm, It is a portable CNC cutting system from the brand manufacturer Thermacut: Input voltage: (VAC) 230V / 120 V, 50/60 HZ, 180 W, 0.5 A Max. cutting area: 3050×1525 mm Max. cutting speed: 3000 mm/min Vertical stroke: 100 mm Autogenous cutting area: up to 100 mm Plasma cutting area: up to 35 mm Plasma interface: Yes Burner height control via arc voltage Total weight: 145 KG Hodpfx Adjv Ai T He Rjn Scope of delivery: Autogenous torch, nesting software, Operating instructions Mini cutting table: small, portable and robust with water tank for cutting with water 600×600 mm cutting area Grid is replaceable with Drain valve low weight (only 108kg) built-in lockable wheels maximum material load 400 kg can be purchased with plasma device and burner on request!

Year of construction: 2013, condition: excellent (used), functionality: fully functional, HIGHLIGHTS - camera system connected to a 19" screen for monitoring the cabin - interchangeable pallet table allows loading and unloading of the machine outside the working area - compact design - smoothing function for small holes and cut-outs for better cutting quality - complete databases for cutting technologies - CAM CONCEPT FINEST Professional software - Significantly lower maintenance costs compared to CO2 laser technology TECHNICAL DETAILS sheet size: 3000 x 1500 mm positioning speed up to 100m/min positioning accuracy +/- 0.03 mm laser source: 2,0 kW cutting capacity steel: max. 17 / 14 mm cutting capacity stainless steel: max. 10 / 5 mm cutting capacity aluminum: max. 8 / 6 mm Cutting power: max. 6 / 5 mm Cabin: with sliding door; complies with laser protection class 1 Control system: ECK-827 (based on Windows XP), multi-process control system Control connections: 2 LCD displays, 4 USB ports, LAN adapter Control functions: simple and intuitive software, diagnostics of machine operation, advanced functions such as scaling, rotation, mirror image of cutouts, database of cutouts, complete databases for cutting technologies Software: CAM CONCEPT FINEST Professional (automation/NC programs, many data interfaces, cutting optimization) Laser source: fiber laser source from the company IPG (Ytterbium Laser YLS 2000) Special features: Fiber optic conduction of the laser beam, low power consumption, low cost of cooling, life expectancy of the source up to approx. 100,000 hrs. Cutting head: PRECITEK Functions: Anti-collision system, error recording system, function of precise positioning, enables quick change of focal length. Hjdpfx Ael D Rp Tsd Rsn pallet table: 2 pieces Filter system: noise level

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,300 mm, total width: 4,600 mm, total length: 11,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, overall weight: 10,000 kg, table width: 2,000 mm, table length: 4,000 mm, table load: 1,200 kg, space requirement width: 4,600 mm, space requirement length: 11,500 mm, space requirement height: 2,300 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, We offer a high-performance industrial fiber laser cutting machine engineered for precision metalworking in professional production environments. The GWEIKE LF4020GAR (6 kW) integrates both sheet and tube cutting in a single system, delivering flexibility, speed, and exceptional accuracy. Suitable applications include: steel construction, metal fabrication, stainless steel and aluminum processing, enclosures, machinery components, and series production. Main Technical Specifications: - Laser power: 6 kW fiber laser (RAYCUS source) - Working area (sheet): 2000 × 4000 mm - Tube cutting capability: integrated - Maximum tube length: 6 m - Tube diameter: - Round: Ø20–240 mm - Square: 20–240 mm Hsdpfx Aey Hx Iyed Ren - Pneumatic front and rear chucks - Automatic shuttle table - Table exchange time: 15–17 seconds Precision & Motion System: - Positioning accuracy: ±0.03 mm - Repeat positioning accuracy: ±0.02 mm - Dual drive rack-and-pinion system - Linear guides: HIWIN - Automatic lubrication system - Fully enclosed safety housing - Industrial smoke extraction unit - Electrical components: Schneider - 80 kVA voltage stabilizer included Load Capacities: - Sheet metal: up to 1,200 kg - Tube: up to 300 kg Dimensions & Weight: - Machine dimensions: 11,500 × 4,600 × 2,300 mm - Machine weight: approx. 10,000 kg Condition: Brand new, unused Availability: In stock, ready for immediate delivery

Year of construction: 2008, condition: ready for operation (used), Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible. Hodpfoyi E Eiex Ad Rjn

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Hedpfowmqwyex Ad Rjn

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Hedpoxaph Uefx Ad Rjn

Year of construction: 2008, condition: ready for operation (used), A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027. Hedpfx Ajx Tumxjd Ren

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Hodpfx Adsxwn Ins Ren

Year of construction: 2006, condition: ready for operation (used), A CNC laser cutting system Bystronic is available. Laser power: 2200W, max. sheet dimensions X/Y: 3000mm/1500mm, travel path X/Y/Z: 1562mm/772mm/100mm, max. material thickness mild steel/stainless steel/aluminium: 8mm/6mm/4mm, positioning accuracy: +/-0.1mm, simultaneous speed: 140m/min, load capacity loading table/cutting table: 300kg/80kg. Machine dimensions X/Y/Z: approx. 6250mm/6000mm/2150mm, laser source dimensions X/Y/Z: approx. 1900mm/950mm/1250mm, weight: approx. 13500kg. Including combined cooling and filtration unit WKL 300-F. Dokumentation vorhanden. An on-site inspection is possible. Hjdsxx Ud Sepfx Ad Rjn

Condition: ready for operation (used), Year of construction: 2005, A Bystronic CNC laser cutting system is available. Laser type: ByLaser 4400, laser power: 4400W, wavelength: 10.7µm, working dimensions X/Y: 3000mm/1500mm, cutting dimensions X/Y/Z: 3000mm/1500mm/170mm, positioning speed: 80m/min, simultaneous positioning speed: 113m/min, acceleration: 4.5m/s², positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. workpiece weight: 890kg, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Machine dimensions X/Y/Z: approx. 12900mm/6100mm/2100mm, weight: approx. 13500kg, laser hours: 58157h, blower hours: 93930h, pump hours: 10398h. Includes water cooling unit, without extraction. The control was completely renewed in 2025. Documentation available. An on-site inspection is possible. Hodexv A E Eopfx Ad Rsn

Condition: ready for operation (used), Grid plate X/Y: 342mm/424mm, viewing window X/Y: 280mm/200mm, max. component dimensions X/Y/Z: 342mm/424mm/275mm, Z-axis: 235mm, machine dimensions X/Y/Z: approx. 600mm/550mm/810mm, weight: approx. 90kg. Controller & marking head: LP-RV200P, laser type: FAYb, laser class: 4, wavelength: 1.06µm, average output power: 20W, marking dimensions X/Y: 90mm/90mm, working distance: 190mm, writing speed: 12m/s, conveyor belt speed: 240m/min. Integrated pilot laser included. Documentation available. On-site inspection is possible. The system is dismantled and packed ready for delivery. Hsdpov Rftfjfx Ad Ron

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Hjdpfx Aowqqwbjd Ron

Year of construction: 2011, condition: ready for operation (used), Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible. Hodpfx Adswzbbre Rsn

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Hsdpjxmkcmefx Ad Rjn

Year of construction: 2010, condition: ready for operation (used), Laser power: 2000W, wavelength: 10.6µm, working dimensions X/Y/Z: 3000mm/1500mm/75mm, max. material thickness mild steel/stainless steel/aluminum: 15mm/6mm/5mm, max. table load: 550kg, travel speed: 60m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm. Machine dimensions X/Y/Z: approx. 7400mm/3300mm/2300mm, weight: approx. 8900kg. Documentation available. An on-site inspection is possible. Hjdpfx Adoxxzh Do Rjn

Condition: ready for operation (used), A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible. Hodpfx Asx A Hhdjd Rsn

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Hsdpfoxxa Ucox Ad Rsn

Year of construction: 2005, condition: ready for operation (used), Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible. Hjdpfev Daf Nsx Ad Rsn

Year of construction: 2008, condition: ready for operation (used), A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible. Hedowynv Hjpfx Ad Ron

Year of construction: 2011, condition: ready for operation (used), Laser: CO2, laser source: Convergent Lasers CP 3000, working dimensions X/Y/Z: 3065mm/1500mm/150mm, max. traverse speed: 140m/min, positioning accuracy: +/-0.03mm, repeatability: +/-0.03mm, max. cutting capacity steel/stainless steel/aluminum: 20mm/12mm/8mm. Machine dimensions X/Y/Z: approx. 10600mm/3550mm/2500mm, weight: approx. 10000kg, control: Primach-20L, laser hours: 56739h. Including extraction system. Documentation available. On-site inspection is possible. Hodpfx Adoyh Nu No Rsn