Used Cnc Fräsen Center for sale (18,540)

Condition: good (used), Year of construction: 2002, Parts shown by hand not come. Iodpfxowb Dxgj Aaceih Technical details are shown on piucture.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 00470000181, - Swing over bed: 700 mm - Over slide: 380 mm - Tailstock travel: 800 mm - Spindle flange turning diameter: 220 x 5 mm - Chuck diameter: 250 mm - Tool cross-section: 25 x 25 mm Ijdowlawmspfx Aacjih

Condition: good (used), Year of construction: 2011, Maximum cutting length 118mm (spindle 1), 125mm (spindle 2), Maximum cutting diameter 165mm, bar capacity 64mm, spindle speed 4,000 rpm, Iiedpfx Aaju Hk Aujcsh sub spindle speed 5,000rpm, milling speed 6,000rpm, C axis 0.001 degrees, spindle power 15/11Kw, 12 station upper & lower turrets, Y axis +/- 40mm. Fanuc control, swarf conveyor, barfeed unit.

Condition: good (used), Year of construction: 2016, Machine No.: 0-250-21-2117, Control system by Homag, type powerControl V2.0, travel paths X/Y/Z: 8,400 x 3,270 x 410 / 185 mm, nesting working level, traverse speed X/Y/Z: 130 x 130 x 20 m/min, workpiece thickness 125 mm, support table 7,400 x 2,250 mm, max. workpiece passage height 100 mm, milling unit, 3 controlled axes, liquid cooling system, 24,000 rpm, drilling unit with 18 spindles for vertical drilling, saw unit, 2 tool changers with 14 holders each, stacking system by Eurotech, type PJ-16.003, year of manufacture: 2013, max. format 6,000 x 2,000 mm, max. weight 290 kg, with protective enclosure, outfeed belt width 2,000 mm, including triple extraction, switch and fuse cabinets. Iodpfexl Afwjx Aacoih

Condition: excellent (used), Year of construction: 2004, CNC Machining Center Helme U 1130 Isdpexl R Hiefx Aacsih Year of manufacture: 2004 Control: Heidenhain iTNC 530 With HSK 63 and swivel axis Technical data: Traverse paths (X, Y, Z): 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool changer - number of positions: 28 -ICS (internal coolant supply) -Controlled B-axis in the milling head -Tool measurement -Chip conveyor

Condition: excellent (used), Year of construction: 1999, Very neat and complete Gildemeister CTX 400 E Series 2 year of manufacture: 1999 control: Heidenhain CNC Pilot 3190 max. turning diameter: 570 mm Iodpfxoxltrbe Aacsih max. turning diameter over cross slide: 420 mm max. turning length: 635 mm C-axis 12-position turret, with a maximum of 6 driven tools max. driven tool speed: 4000 rpm main spindle: 21 kW speed range: 25-5000 rpm tailstock chip conveyor tool probe drawer cabinet with accessories workbench/drawer cabinet with accessories tool holders chuck and collet holder documentation machine is powered for inspection

Condition: used, Year of construction: 2017, turning diameter 760 mm Iiodpoxgn Dbefx Aacsh turning length 710 mm control Siemens x-travel 50 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle bore: 65 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 45 mm, rapid traverse X-axis: 30 m/min, controller model: FANUC SERIES 31 i-MODEL A, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation for timely collection between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Travel distances: X1 / X2 axis: 180 mm Y1 axis: 45 mm Z1 axis: 704 mm Z2 axis: 620 mm E2 axis: 720 mm Rapid traverse X/Y/Z axis: 30 m/min Spindle 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW Spindle 2 Max. speed: 7,000 rpm Spindle nose: 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. jaw weight: 1.25 kg Drive power: 16.5 kW Turret Turret 1: 10-position tool turret Turret 2: 12-position tool turret Driven stations: 12 stations Max. speed of driven tools: 8,000 rpm Iijdpfexm S Ahjx Aacsh MACHINE DETAILS Control model: FANUC SERIES 31 i-MODEL A Electrical data: Operating voltage: 400 V Frequency: 50-60 Hz Rated current: 80 A Dimensions & weights: Dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Total weight: 9,000 kg Operating hours: 5,381 h EQUIPMENT Documentation/manual KNOLL chip conveyor Tool holders

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z: 350 x 550 x 510mm, table size 500 xx 400mm, workpiece weight 200kgs, workpiece size 500mm diameter x 350mm high, A axis -120/+30 degrees, C axis 360 degrees, Iiedpfjtwbdqox Aacjh Spindle speed 12,000 rpm, Spindle taper Din40, 30 Station ATC, coolant, Smooth Control, through spindle coolant, swarf conveyor

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door Iodpfx Aaeww Nazscsih - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Isdpoxmirgsfx Aacoih Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Iiodjxnld Uspfx Aacoh Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Isdpfjxmfa Hjx Aacoih Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 375 mm, bar diameter (max.): 52 mm, controller manufacturer: DMG MORI, controller model: COMPACT LINE, number of slots in tool magazine: 12, CNC Lathe TECHNICAL DATA & EQUIPMENT: Frequency: 50 Hz Swing over bed: 620 mm diameter Swing over cross slide: 465 mm Number of spindle speed stages: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Shank height for square tools: 20 mm diameter Shank diameter for boring bars: 32 mm diameter Rapid traverse in X-axis: 30,000 mm/min Rapid traverse in Z-axis: 30,000 mm/min Including coolant system and chip conveyor Iisdpfx Aajxm U Efecsh PICK-UP NOTES: Collection must be arranged firmly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 2009, turning diameter 410 mm turning length 800 mm greates pass round over bed 700 mm control Heidenhain TurnPlus IT CNC Pilot spindle passage Ø 65 Teilhohlspannung mm spindle speed: 25- 5000 U/min spindle motor 25 kW max. torque on the spindle 280 Nm no. of tools in turret 1 12 VDI 40 driven stations 12 VDI 40 speed of driven tools 4000 U/min drive milling spindle 5,6/ 11,3 kW Ijdeurnggjpfx Aacsih y-axis +/- 60 mm sup spindle 15 kW Spindlespeed subspindle 20- 6000 U/min rapid traverse 30/22,5/30 m/min tail stock Gegenspindle/Subspindle range L-W-H 4,7 x 2,7 x 2,0 mm weight of the machine ca. 6,5 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck SMW 315 BH main spindle - 3 jaw chuck SMW 250 BH sub spindle - chipconveyor - oil mist collector LTA - automatic door - coolant pistol - partly hollow spindle Ø 65 x 840 mm

Condition: used, Year of construction: 2010, · Working area: 2700 x 1300 mm · Travel X-Y: 3070 x 1750 mm · Travel length Z-axis: 270 mm · Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The layout of the machine allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The working unit is in turn attached to this mobile unit carrier on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit F12: Drilling head with 12 + 6 spindles · 7 individually accessible vertical spindles in X · 5 individually accessible vertical spindles in Y · 4 horizontal spindles in X (2 + 2) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fit · pneum. Feed stroke: 60 mm Grooving saw unit in "X" · Integrated in the drill head · Grooving saw blade with a diameter of up to 120 mm Main milling unit: · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Right / left rotation · Ceramic bearings (other power classes are optionally available) Tool changer R4 Automatic tool changing device for 4 tools. Traveling on the rear unit carrier to allow quick access to the tools. · Number of tool positions: 4 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight of all tools: 16 kg · Mount for 1 angle gear · Traveling in X (other and larger tool changers are optionally available) Work table The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system ensures maximum flexibility with exact positioning and optimal hold of the workpieces. · 6 supports 1000 mm continuously pneumatically adjustable in X · 12 round vacuum suction cups D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) 1 stop in Y per support (6 in total) · The retractable reference stops are controlled by CNC · Pendulum machining as standard (2 work areas) --- other clamping systems are optionally available --- Axis movement The drive system in X, Y and Z is via ground recirculating ball bearings of the highest precision class. Such characteristics are important to ensure balanced movement even with more complex work. The movement of the various axes is carried out by brushless three-phase servo motors / brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These features make this type of drive completely maintenance-free. · Rapid traverse in Iisdpfxoxnld Ij Aaceh

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 Iijdpsxmfatefx Aacoh - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: used, Year of construction: 2006, turning diameter 325/220 mm turning length 532 mm turning diameter over slide 220 mm control Fanuc 0 spindle passage 65 mm spindle nose A2-6 number of spindle speeds 3500 U/min Isdpov D Rgdefx Aacjih spindle motor 18,5 kW Number of tools 12 BMT driven stations 12 BMT speed of driven tools 5000 U/min power of driven tools 3,7 kw rapid traverse 30 m/min tail stock MK 4 Ø 80 x 100 mm range L-W-H 6,1 x 1,7 x 1,72 m weight of the machine ca. 5,4 t CNC- lathe with driven tools, bar feed magazin and box way system - short barfeed magazin - parts cacher - tool measuring - 3 jaw chuck Ø 250 - chip conveyor - oil dust collector - tailstock - 1 + 1 driven toolholder - some fixed toolholders

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Iedpfx Aexnldhoacjih Storage Location: Supplier

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Iiedexmd Ucopfx Aaceh Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2019, turning diameter 230/300 mm Isdpfx Aasww Nanocoih turning length 452 mm greates pass round over bed 700 mm control Siemens 828 D Shop turn spindle passage 65 mm spindle speed: 4500 U/min spindle motor 15/11 kW max. torque on the spindle 179 Nm no. of tools in turret 1 12 BMT 55 driven stations 12 BMT 55 speed of driven tools 5000 U/min drive milling spindle 5,6/3,7 kW y-axis +/- 60 mm sup spindle 7,4/4,9 kW Spindlespeed subspindle 6000 U/min rapid traverse 36/36/10 m/min tail stock Gegenspindle/Subspindle range L-W-H 3,9 x 1,65 x 2,0 mm weight of the machine ca. 4,7 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Ø 210 mm main spindle - 3 jaw chuck Ø 135 mm sub spindle - chipconveyor - parts catcher with box in door - Tool measurung - 2 + 2 driven toolholder - some fixed toolholder - signal lamp 3 colours - 15 bar coolant - double coolant filter

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Ijdpfx Aasxnldbocoih

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX Ijdsxmd T Sepfx Aaceih X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Iiodpfxjxmd Tlo Aacoh Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Y-Travel: 1500 mm Z-Travel: 900 mm Iijdpfx Aaexmd S Ioceh B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!