Used Cnc Corner Cleaner for sale (11,970)

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Gedpfxj Ahmu Ts Acmskd Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1492, turning length: 620 mm, turning diameter: 240 mm, spindle speed (max.): 4,200 rpm, controller model: Okuma OSP5000L, No minimum price – guaranteed sale to the highest bidder! Godpfxe Afxvvo Acmekd TECHNICAL DETAILS Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Spindle bore: 62–80 mm Max. turning diameter: 240 mm Swinging diameter over bed: 450 mm Swinging diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min MACHINE DETAILS Control: Okuma OSP5000L Voltage: 380 V Phases: 3 Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm EQUIPMENT Documentation/Manual

Condition: excellent (used), Year of construction: 2002, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in 2018! TECHNICAL DETAILS X-axis travel: 880 mm Y-axis travel: 630 mm Z-axis travel: 630 mm B-axis swivel range: -15° to +90° Spindle speed: 12,000 rpm Gjdpfx Ao Afw Ahecmokd Tool positions: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours: 50,033 h Spindle operating hours: approx. 17,000 h Spindle replacement: 11/14/2018 EQUIPMENT Controlled B-axis in the milling head 32-position tool changer Coolant system

Condition: good (used), Year of construction: 2006, Technical description added as pdf file. Machine is in very good working condition. Still in production. Gkedpfxj Ahyx Ro Acmed On last picture written 19 stk, with machine will come 29 stk (pieces).

Condition: good (used), Year of construction: 2004, CNC turning/milling center Manufacturer: MAZAK Machine model: Integrex 200 2S Control: Mazatrol 640 MT pro Year of manufacture: 2004 TECHNICAL DATA Gsdpfj Ahynkox Acmskd Swing diameter, max. (mm) 660 Turning diameter, max. (mm) 660 Max. turning diameter over slide (mm) 500 - 660 Bar machining up to Ø (mm) 64 Workpiece weight - Chuck workpiece (kg) 100 - Shaft workpiece (kg) 150 Travel distances - X-axis (mm) 580 - Z-axis (mm) 1,045 - Y-axis (mm) ± 80 - W-axis (mm) 1,050 - B-axis (degrees) -30 to +195 Rapid traverse rate (m/min) - X-axis (m/min) 38 - Y-axis (m/min) 26 - Z-axis (m/min) 38 - W-axis (m/min) 30 - C-axis (rpm) 400 Feed rate range - X / Z / Y-axis (mm/min) 0 – 8,000 Main spindle integrated spindle motor - Speed range (stepless) (rpm) 35 – 5,000 - Drive power (kW) 22 - Torque max. (Nm) 349 - Spindle nose A2 - 6 inches - Indexing (degrees) 0.0001 Second spindle - Speed range (rpm) 35 – 5,000 - Drive power (kW) 18.5 - Torque max. (Nm) 326 - Indexing (degrees) 0.0001 Driven tools - Speed range (rpm) 15 – 12,000 - Drive power (kW) 15 - Torque max. (Nm) 120 - Tool holder Capto C6 Tool magazine - Number of tool positions 40 - Tool weight max. (kg) 10 - Tool diameter max. (mm) 90 - with free secondary positions max. (mm) 125 - Tool length max. (mm) 300 - Tool change time (sec.) approx. 1.3 sec Connected load 62 kVA Operating voltage 400 V / 50 Hz EQUIPMENT FEATURES + Coolant tank capacity 220 liters + Chip conveyor, hinged belt design, discharge to the side + Automation alphaMAX ++ Industrial robot designation Motoman NX 100 ++ Number of axes 6 ++ Load capacity 20 kg ++ Positional repeatability ± 0.06 mm DIMENSIONS and WEIGHTS Machine weight (kg) approx. 10,200 Machine footprint (mm) 3,820 x 2,060 Subject to changes and errors in technical data and specifications.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, A used CNC turning machine with driven tools and a C-axis. Gkedpfx Ao Ah Itzocmsd

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning length: 1,035 mm, turning diameter: 390 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,045 mm, MSD-501 TA II (Fanuc) cnc control main spindle: 3-jaw chuck sub spindle: 3-jaw chuck C-axis driven tools 12-fold revolver chip conveyor coolant device portal loading device without function Technische Daten: / technical details Umlaufdurchmesser über Bett / rotary diameter over bed 680 mm Gkedpfo Ah Sbiex Acmed Umlaufdurchmesser über Schlitten / rotary diameter over sledge 510 mm Drehdurchmesser / turning diameter 390 mm Drehlänge / turning length 1035 mm X-Achsen Verfahrweg / X-axis travel 235 mm Z-Achsen Verfahrweg / Z-axis travel 1045 mm max. Drehzahl / max. spindle speed 3500 UpM /rpm Anzahl der Revolverplätze / numbers of tool places 12 max. Stangendurchlass / max. bar diameter 73 mm Gewicht ca. / weight ca. 5600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding

Condition: used, machine/vehicle number: 008744, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Gjdpfx Aoz Ig Ufecmskd Total number of tool changer positions: 4

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Gkedpfxew Dcb Se Acmod

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, Gkodpfoz D Ayvjx Acmod 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor, Gksdpfsz Ehvfjx Acmsd

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis Godpfx Ajz R T Exjcmekd - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: used, ROSA LINEA IRON 08.6 N is a CNC surface grinder designed for precision, high accuracy and reliability. Table 800×400 mm; travels X 950 mm, Z 550 mm; grinding length 850 mm, width 630 mm; table load max 1000 kg; wheel Ø400×80 mm, bore 127 mm. Wheel speed fixed 1500 t/min; table speeds 1–38 m/min; automatic cross feed stepless 1–8 m/min; supply 3×400 V 50 Hz; machine weight ≈6000 kg; footprint 3600×2200×2300 mm. Achieves tight tolerances; suitable for automotive, tooling, aerospace, medical and watchmaking. Gksdpfxs Adziio Acmsd

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm Godpfxoz R D Hle Acmekd swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Control system: Siemens Travel range X-axis: 300 mm Gkedez Ri U Iopfx Acmed Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 1,011 mm, turning diameter: 658 mm, spindle bore: 102 mm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,077 mm, rotational speed (max.): 3,300 rpm, rotational speed (min.): 50 rpm, bar passage: 102 mm, total height: 2,720 mm, total length: 6,585 mm, total width: 2,800 mm, overall weight: 13,400 kg, We are pleased to offer this Mazak Integrex i-400 x 1000 multitasking CNC machine, manufactured in 2011 and equipped with Mazatrol Matrix control. A versatile machine combining turning and milling operations in a single setup, ideal for precision machining and complex (bigger) components. Technical specifications: Turning diameter: 658 mm Max. turning length: 1011 mm Bar capacity: 102 mm Travel on X-axis: 615 mm Travel on Y-axis: 250 mm Travel on Z-axis: 1.077 mm B-axis travel: -120/+120° Main and spindle: 50 - 3300 1/min. B-axis index increments: 0,0001° C-axis indexing of spindle: 0.0001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 36 tool positions NC Tailstock: MK5 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: Gksdsz Rt Dtopfx Acmod With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 16P10302-015, SPECIFICATION Swing over bed 400mm Swing over the cross-slide 216mm Distance between centres 760mm Cross slide travel 216mm Spindle bore 54mm Spindle nose D1-6 camlock Spindle taper MT4 in bush Spindle rpm 150-2500rpm Spindle motor 5.57kW Gkodez Snlvjpfx Acmed Tailstock travel 127mm Tailstock taper MT4 Footprint L x D x H 2090 x 1260 x 1800mm Approximate weight 1580Kg MACHINE EQUIPPED WITH: - Prototrak SLX control TRAKing 3 Jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting Manual

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, drill holder -Tool holder: CNC tool holder, 12 pieces -Type: VDI 50 -Specifications: see photos / parts list Gjdpfo Aayaxox Acmjkd -Submission/Price: complete -Transport dimensions: 430/310/H215 mm -Weight: 48.5 kg

Condition: excellent (used), Year of construction: 2020, This NTX 2500/1500 Second Generation is a fully equipped turn-mill center featuring a separate milling spindle and B-axis, designed for more complex 5-axis machining operations. Spindle hours: ca 7800h Control unit Fanuc F31iB5 with CELOS Ergoline (NTX Gen2) XYZ Travel 675 mm (-125+500) x 300 mm (±150) x 1562 +164mm for ATC Turning length 1530 mm Turning diameter 670 mm B-axis 240°(±120°) Main spindle speed 4000 rpm Through spindle hole 91mm Sub-spindle speed 4000 rpm Main spindle chuck 304mm (KITAGAWA B212) Sub-spindle chuck 304mm (KITAGAWA N-12A) Tool spindle speed 12000 rpm Toolchanger 76 ATC Spindle taper CAPTO C6 Machine weight 18160 kg Machine Height 2750 mm Machine floor space 6250 x 2830 mm Including: Renishaw RMP60 workpiece measuring system Tool presetter Chip conveyor Automatic Centering Steady Rest SMW Mist collector Gkodpj Afnzhofx Acmod Interlit-TMF300/600 compact filter unit 70 bar Paper belt filter TMF300, tank volume 600L high pressure pump 70 bar - 32 L/min Workpiece unloader, conveyor and stocker Etc. Full technical description and options in the attached document. Machine can be viewed in operation upon appointment. Available for immediate delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Godpfx As Ad Iw Hjcmjkd Type: Rover A 1643 Year of manufacture: 2016 Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A1432 Year of manufacture: 2016 Technical data Gkjdpfx As Ad Iw Tecmsd 3-axis machine HSD drilling head - Maximum motor speed: 6,000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80-120 mm Drive power: 17.3 kW Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 Gksdpfxs Ad Izlj Acmjd

Condition: used, Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 605 mm, CNC Lathe Manufacturer: MAZAK Model: Multiplex 6300 Year of manufacture: 2007 Control: MAZATROL 640T Technical specifications: - Swing diameter: 430 mm - Distance between spindles: 1450 mm - X-axis: 310 mm - Z-axis: 605 mm - Spindle speed: 4,000 rpm Gkedpfxjyb S Nrs Acmed Equipment & accessories: - Gantry loader In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2012, condition: good (used), Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Gedpfxsiyx Dij Acmjkd Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), BWO Lorenz CNC 785 control panel and display, 082205, serial number: 4935.001 P2, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpfjlcf Rbsx Acmjkd