Used Cnc Bed Type Milling Machine for sale (114,283)

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 1,800 rpm, controller model: Fagor 8055, TECHNICAL DETAILS Table size: 1,700 x 510 mm Max. table load: 3,000 kg Travel paths Itjdpfx Aaswfghrjcen X-axis travel: 1,320 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Spindle Spindle speed range: max. 1,800 rpm Tool holder: ISO-50 Control system CNC control: Fagor 8055 Electronic handwheel: Fagor MACHINE DETAILS Machine weight: 8,500 kg

Condition: used, Year of construction: 2013, functionality: unexamined, power: 0.75 kW (1.02 HP), Urban 4 m bed milling machine SK40 for sale. Itedpfx Aeu Aqmljacen Slightly used, has only been used a little! The machine was set up and commissioned by Urban in February 2023 and has very few operating hours. The machine has a pick-up station incl. angle head drive as an accessory. Bids ex location Dossenheim.

Condition: used, Year of construction: 1997, operating hours: 18,298 h, machine/vehicle number: 178-49, CHIRON Type FZ 22 CNC vertical machining center CNC control Simens 810 Tool holder SK 40 DIN 69871 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Spindle speed max. 4500 Main spindle drive max. 27KW Thread cutting capacity M36 Milling capacity 460cm³/min Torque 360NM Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - Tool changer 40-fold must be overhauled - Indirect measuring system - Coolant unit with chip conveyor opposite Itodpfsvi Ntgex Aacon Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport weight on the truck approx. 10 tons.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,500 rpm, No minimum price - guaranteed sale at the highest bid! Pick-up condition: Machine must be collected in week 44 - Bidder is obliged to collect the machine on time! Provision: free loaded (FCA) or own dismantling (EXW) possible Dismantling & loading costs are waived for EXW provision TECHNICAL DETAILS Control: TNC 430 HEIDENHAIN X-path: 2,500 mm Y-path: 1,000 mm Z-path: 1,250 mm Table clamping surface: 2,700 x 900 mm Spindle speed Speed: 4,500 1/min Tool holder: SK 50 Spindle motor: 20 kW MACHINE DETAILS Table load: 8 t Machine weight: approx. 16.5 t Itsdpfxouu Agmj Aacen EQUIPMENT - CNC milling machine - Head 2-fold indexed milling head: 1°/2.5 - chip conveyor - no changer

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Axes X-axis travel mm: 3.000 Y-axis travel mm: 1.700 Z-axis travel mm: 1.500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Table dimensions mm: 3.200x1.200 Maximum weight on table kg: 8.000 T-Slots: 7xT22 - 150 mm Spindle Spindle speed rpm: 30 - 5.000 Spindle drive power kW: 28/38 Ijdpfx Aasrw Arzscetn Gear box steps: 2 Cooling Cooling through the Spindle Center bar: 22 Tool system Tool holder: ISO-50 DIN 69871A Equipment Electronic Handwheel Chip conveyor 4th axis ready

Condition: used, Year of construction: 1980, x-travel:1600 mm y-travel:800 mm z-travel:630 mm spindle taper:SK 50 feed speeds:10-6000 mm/min rapid traverse:6 m/min turning speed range - stepless:20-2000 U/min max. table load:5000 kg dimensions of switch cabinet:1800 x 530 x 2000 mm total power requirement:18 kW weight of the machine ca.:11 t dimensions of the machine ca.:4,6 x 2,9 x 2,62 m Isdjcxxrnspfx Aacstn with PHILIPS NC 6664 3-axis control with program memory, hydraulic tool clamping, coolant system, chip-conveyor, horizontal and vertical spindles (SK 50), separate electrical cabinet, NC-round table, emergency cut-off

Year of construction: 1997, condition: used, machine/vehicle number: B-388, Used FIL FA 160 HEIDENHAIN TNC-360 Bed type milling machine Itjdpfxogcuzro Aacsn

Condition: used, Year of construction: 1996, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, X-AXIS TRAVEL: 2500 MM Y-AXIS TRAVEL: 1000 MM Z-AXIS TRAVEL: 1000 MM FIXED TABLE: 1600 X 800 MM - MAXIMUM LOAD: 5000 KG ROTARY TABLE: 750 X 750 MM - MAXIMUM LOAD: 5000 KG RAPID FEED AXES: X, Y, Z: 10,000 MM/MIN SPINDLE TAPER: ISO 50 SPINDLE SPEED: 50 - 3000 RPM SPINDLE MOTOR POWER: 16.5 KW NO. 2 SPEED RANGE CNC HEIDENHAIN TNC 407 AUTOMATIC HEAD HORIZONTAL - VERTICAL AUTOMATIC TOOL CHANGER Itsdpewz H Hmsfx Aacen

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, table width: 1,030 mm, table load: 25,000 kg, table length: 12,000 mm, Heidenhain TNC 415 control Ijdpewcndpofx Aacetn

Condition: used, Year of construction: 2011, - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods on all axes - Ball screws - Hydraulic tool retractor - AC servo feed motors - Sliding doors with safety glass - Universal milling head - Hardened guideways - Plastic-coated counter guide - Electromagnet. Main spindle brake - Automatic central lubrication system - Integrated coolant system - Steel telescopic cover for transverse travel - Steel telescopic cover for longitudinal travel - Work light - Year of manufacture 2011 Specifications Worktable: - Table clamping area: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel paths: - X-axis - Longitudinal travel: 1250 mm - Y-axis - Transverse travel: 540 mm - Y-axis - Transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and column: 500 mm Itedswf Ntqspfx Aacsn Column: - Z-axis - Vertical travel: 550 mm - Distance between spindle nose and table with vertical head position: approx. 50 - 600 mm - Distance between spindle nose and table with horizontal head position: approx. 360 mm 910 mm Milling spindle: - Tool holder: DIN 2080 ISO 50 - Speed range: 40 - 2000 rpm Feeds and rapid traverse rates: - Longitudinal/transverse feed: 4000 mm/min - Vertical movement (column): 2000 mm/min - Rapid traverse longitudinal/transverse: 4000 mm/min - Rapid traverse vertical: 2000 mm/min Motors: - Milling spindle motor: 11 kW - Feed motors for X/Y/Z axes: 1.5 kW each - Coolant pump: 0.12 kW - Lubricant pump: 12 W Installation: - Dimensions W x H x D: 3000 x 1880 x 2660 mm - Net weight of the machine: approx. 3800 kg

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 12,000 m/min, rapid traverse Y-axis: 12,000 m/min, rapid traverse Z-axis: 12,000 m/min, spindle speed (max.): 4,000 rpm, input voltage: 380 V, input frequency: 50 Hz, Bed type millimg machine FIL type FBM 600,axis traverse ; X 6000 mmY1200mmZ2000mm. Rapid traverse 12000 mm/min. Automatic head index 2*, rpm4000 two range, spindle uso 50. Tool magazine 40 positions Itsdpjwb Exzefx Aacon Cnc Selca type S3045

Condition: like new (used), Year of construction: 2017, operating hours: 784 h, functionality: fully functional, Controller Fanuc 31i Model B Spindel diameter 110 mm Table size 1250 x 1500 mm T slots in the table 22 mm / H8 x 150 mm x 7 Max. table load 5000 kgs Distance between the spindle nase and table surface 0 - 1600 mm (universal head) Distance between the spindle center and table surface 105 - 2250 mm (universal head) X travel 2200 mm Y travel 1600 mm Z travel 1600 mm W travel 550 mm (spindle feedrate) B axis 0,001 degree (stepless adjustable) Spindle speed 35 - 3000 rpm Tool holder type ISO50 . ATC magazin 60-fold Rapid speed on X / Y / Z / W axes 12 / 12 / 12 / 6 m/min. Feedrate on X / Y / Z / W Achsen 10 / 10 / 10 / 6 m/min. Spindle power 18,5/15 kW Torque 863 / 740 Nm Power required 400V, 50 Hz, 50 kVA Weight 21500 kgs Dimensions L x W x H = 7750 x 4715 x 3700 mm Accessories, features - Coolant unit - ATC magazin - Coolant through spindle 20 bar - Chip conveyor - RENISHAW OMP60 Infra zero point presetter - Universal milling head - Clamping angles 2 pcs - Separated electrical cabinet - Manuals Itsdpfxjttgzcs Aacon The machine can be found in almost new condition. It was barely used. Ready to buy immediately. Still under power in Hungary. The dismantling and loading are the buyer's cost.but we can help to customers in this job by ourself.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, spindle diameter: 100 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, The machine is in good technical condition, currently disconnected. Heidenhain TNC 530i control system, chip conveyor, tool magazine 40 pcs. Itsdpfxov Upbno Aacen

Condition: used, CNC HEIDENHAIN TNC 430 X AXIS TRAVEL 3000 MM Y AXIS TRAVEL VERTICAL 1500 MM Z AXIS TRAVEL 1400 MM Itodpfxspbwfxs Aacon TABLE 3200 x 1100 MM SPINDLE MOTOR POWER 24 KW WORKPIECE LOAD 10 TON FEED 12 MT/MIN WEIGHT KG.24000 ATC 40 PLACES INDEX AUTOMATIC HEAD AXIS A 3° AXIS B 2,5 ° CHIP CONVEYOR

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 System resolution: 0,001 mm Itodpfx Aaounhy Sjcon Documentation for machine

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° Isdeu Nc Rijpfx Aacjtn feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² compressed air: 6,3 bar Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 Iedpfx Aov Rdzbjacotn spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head *

Condition: used, Technical details: Iodpfx Asva Hfheacetn x-travel: 700 mm y-travel: 250 mm z-travel: 200 mm spindle taper ISO: SK40 range of revolution per miute: Spindel 32 - 2000 / 18 step U/min spindle head swivable left - right: 90 ° table surface area: 1000x400 mm weight approx.: k.A. kg dimension machine xH: 1,6 x 1,2 x 1,9 m with vise *

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places - PDSP control RTU / MTU (Remote Terminal Unit) Itodpfx Aajbnpgxecon - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series machine - 1250 mm x 1250 mm x 220 mm High precision - milling and drilling with extremely high speed and quality. As CNC Milling machines manufacturer whistler-technology with SkyCNC CNC milling and engraving your partner. Our PFEIFER technology SkyCNC WK series milling machines with high-precision ball screw drive on all axes provide highest precision, accuracy and speed - with a pleasant value for money.   By building a high solid steel base frame ca. 2,2 t high static rigidity of the machine is achieved, so that the processing of solid woods and various metals will be trouble. The sophisticated location and distribution of 35mm linear rails and guides and the associated massive portal with its vibration damping characteristics distinguish our CNC milling machines made especially. The superior programmable CNC control allows flexible intervention via touchscreen in all production conditions and is standard in our PFEIFER technology SkyCNC WK series milling machines. This CNC control, you can create your milling data or CAD / CAM import data and then can be processed independently of a computer.   The tool changer (up to 16 tools), the vacuum table made of solid aluminum, various tool / workpiece cooling solutions, the automatic lubricating device for all axes and other refined details, complete this milling system.   With the PFEIFER technology SkyCNC WK series you get a reliable and efficient bulk - Portal - milling system for your applications.   - Drive system: high-precision ballscrew on X and Y axis and Z axis of high-precision manufacturing - Operating speed: 15 m / min - Xyz Workspace / traverse: 1250 x 1250 x 220 mm - Table size (vacuum table with milled vacuum tracks): 1220 x 1220 x 30 mm - Xyz Repeatability: 0.03mm - Xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM etc. - Format: ISO standard G-code, FANUC compatible - Additional: Spindle motor / tool changer / Vacuum table according to customer requirements - Warranty: 2 years - Spindle Power: from 5.5kW (other spindle power optional) - Spindle speed: 6000-24000 U / min (depending on requirements) - Spindle taper: BT 30 4ea ER20 (other recordings optional) - Drive: AC SERVO motors on all axes Ijde Sd U Dopfx Aacetn - Tool changer: 6 magazine slots - Power supply: AC400 V ± 10% 50Hz - Power 10-15 kW (depending on equipment) - Dimensions: 2670 (L) X 1735 (W) x 1790 (H) mm - Weight: 2700 kg

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 19,000 kg, total length: 6,120 mm, total width: 5,050 mm, total height: 3,150 mm, volledige CNC indexeerfreeskop (2x 2,5°) gereedschapswisselaar met 30 posities Iodpfx Asxpkifoacjtn koeling door spindel Longitudinal travel X-axe: 3600 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 4100 x 900 mm Power on spindle: 22/29 kW Admission in millinghead (ISO): BT 50 Max speedrange: 1 > 2250 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain 355, empty load weight: 11,500 kg, total length: 7,500 mm, total width: 3,500 mm, total height: 3,800 mm, Butler Elgamill X: 3000 - Y: 1670 - Z: 1050 mm Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1050 mm Ijdsxpgh Repfx Aacotn Travel Z-axe: 1670 mm Dimensions clamping space- table: 3100 x 1200 mm Power on spindle: 30 kW Admission in millinghead (ISO): ISO 50 Max speedrange: 16 > 2000 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain 355, empty load weight: 8,400 kg, total length: 5,000 mm, total width: 2,720 mm, total height: 2,420 mm, CN 3 assen horizontale en verticale freeskop T-sleuven: 18 x H8 Afstand tussen T-sleuven: 80 mm Met de kop in de hoogste positie kan het werkstuk een maximale hoogte van 955 mm hebben. Longitudinal travel X-axe: 1800 mm Cross travel Y-axe: 800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2000 x 630 mm Itodoxpgiuspfx Aacon Power on spindle: 15 hp Admission in millinghead (ISO): ISO 50 Max speedrange: 25 > 3250 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 410, empty load weight: 9,000 kg, total length: 2,800 mm, total width: 2,540 mm, total height: 2,500 mm, CME BF-01 X: 1800 - Y: 700 - Z: 600mm Longitudinal travel X-axe: 1800 mm Cross travel Y-axe: 700 mm Travel Z-axe: 600 mm Iedpfexpgizjx Aacotn Dimensions clamping space- table: 1800 x 600 mm Power on spindle: 30 hp Admission in millinghead (ISO): ISO 50 Max speedrange: 3000 rpm Power needed (KVA): 11 kW

Condition: ready for operation (used), controller manufacturer: Bosch CNC, empty load weight: 8,000 kg, total height: 2,820 mm, Retrofit 1991 Besturing: Bosch CC100M 3 assen max kraandiameter: 36 mm zie C05 1145 Longitudinal travel X-axe: 3340 mm Ijdpfxexpgk Sj Aacotn Cross travel Y-axe: 915 mm Travel Z-axe: 810 mm Max height workpiece: 810 mm Type of millinghead: drilling Type Admission in millinghead (ISO): ISO 4 Universal (2x360°): * Max quill travel Z': 305 mm Max speedrange: 79 -- 925 rpm Power needed (KVA): 5,5 hp