Used Circular Saw for sale (6,056)

Condition: new, saw blade diameter: 400 mm, – Saw blade 400 mm Pjdpfx Akjz Ehy Rsiegu – Double miter cut – Compound miter cut – 4 manually operated clamping devices – Protective cover – Documentation – 400V

Condition: good (used), Mitre and cross-cut saw for aluminium. Swivels left and right up to 45° and tilts up to 45°. Saw blade diameter up to 250 mm. Pjdpfey N S Hzjx Akiegu

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1811001, type of input current: three-phase, overall weight: 110 kg, input voltage: 400 V, Equipment: emergency stop, Abrasive cut-off saw manufactured by Vertex Machinery Works Co., Ltd. The unit was produced in 2018 in Taiwan. The machine is mounted on a dedicated, blue workshop base. Technical data: Manufacturer: Vertex Machinery Works Co., Ltd. Country of manufacture: Taiwan Year of manufacture: 2018 Serial number (S/N): 1811001 Motor power supply: 400 V / 50 Hz Number of phases: 3 PH (Three-phase) Machine weight: 110 kg Compliance mark: CE Design and equipment: The machine has a manual clamping lever and a vise for securing the workpiece. The cutting part is equipped with an abrasive disc (a close-up photo shows a Tyrolit disc). The steel base is equipped with a lower shelf made of perforated sheet metal. Podoz Sutxepfx Akiogu

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45° Podozzvwropfx Akiogu

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 450 mm, cutting range round steel at 90°: 150 mm, Kaltenbach KKS 450 E, fully refurbished with 12 months warranty. The KKS 450 E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chromium steel, brass, copper, bronze, etc. Key advantages at a glance: - Clamping, sawing, turning, and opening – all with a single lever - Adjustable saw height using a lever - User-friendly mechanical controls mounted directly on the machine - Easy access for saw blade changes and maintenance work - Workpiece clamping system on both sides of the saw blade - Two sawing speeds suitable for virtually all applications - Ergonomically positioned controls for ease of use - Adjustable stroke limit and rapid return of the saw blade All refurbished Kaltenbach machines are supplied as standard with a 12-month warranty. Pgsdpfjynut Tsx Akisu

Condition: used, Year of construction: 2020, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device Pgjdpfxsygx Aie Akiju

Condition: excellent (used), saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm mitter cutting - all-position +90°/-90° ° cutting speed 10/20 m/min voltage 400 V feed speeds infinitely variable 0 - 1000 mm/min Pgsdpfoy Aytvox Akisu total power requirement 3,4 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1,10 x 0,9 x 1,50 m

Condition: good (used), Year of construction: 1998, Robland E45 Saw blade diameter: 450 mm Cutting height: 150 mm Motor: 7.5 kW Saw blade can be tilted up to 45 degrees Pgsdpfx Aszznxzskieu Saw blade width to the right of the saw: 1,220 mm Cutting length of the sliding table: 1,270 mm

Condition: good (used), Year of construction: 2000, Panel saw with scoring unit 3 m sliding table Length adjustment via display Width adjustment by hand Height adjustment converted to foot-operated hydraulic system with clamping bar for veneer or other materials Pedpfx Aetw Hd Ajkiegu

Condition: used, Year of construction: 1995, saw blade diameter 315 mm Pjdpfxjzxt Nmo Akisgu cutting diameter 100 mm cutting speed 40 / 80 U/min total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,8 x 0,6 x 1,65 m

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting range at 90 degrees with a blade size of 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic Pedszy Egtspfx Akijgu 2 additional saw blades --> --> Special price: EUR 4,000.00 net, free on board!

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw Pgjdpfx Aouqk Azjkisu

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Pedeyrhu Sjpfx Akiogu Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: used, Year of construction: 1995, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,6 kW weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right Pgsdpfxjvxlpvs Akieu - Coolant device - 2 speeds - Machine base - Operating instructions

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left Pjdsyu U Dfepfx Akiogu * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: new, saw blade diameter: 400 mm, input voltage: 400 V, Equipment: documentation/manual, - Saw blade, Ø 400 mm - Double miter - Compound miter - 4 pneumatic clamping devices - Minimum quantity lubrication system - Compressed air gun - Protective cover Pgjdsz D Niqjpfx Akiou - Documentation - 400V

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm Pgjdpfxjy N D Nho Akiju capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance Psdjxpqzhopfx Akisgu - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff

Condition: used, Technical data: Saw diameter: 500 mm Saw spindle diameter: 30 mm Saw feed manual Max cutting height: 150 mm Max cutting width: 500 mm Table width: 580 mm Pjdpfxeri Skwj Akiegu Table with 6 rollers in the table Diameter of rollers: 60 mm Extraction spigot diameter: 100 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 4000 mm Width: 1180 mm Height: 1700 mm

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor Pjdpfx Aksw I Sg Djiogu • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: new, Year of construction: 2026, Cutting length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 1565 mm (telescopic extension up to 2550 mm) Cutting depth: 170 mm Scoring cutter: no Sawblade height adjustment: handwheel Sawblade pivot adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: - Pgedeqx Igqopfx Akiou Width stop indicator: scale Crosscut ruler indicator: scale Sawblade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 9.2 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 2900 mm Machine width: 1800mm Weight: 800kg

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls smooth, sliding roller roller with saws smooth, sliding roller – bottom: guide Podpfoztad Tsx Akijgu pawls track 2 feed speed settings + stepless adjustment central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approx. 1800kg – made in Italy – DTR documentation available – robust machine – used multi-blade saw, very good condition Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: - Cutting height: ~ 145 mm - Cutting width: ~ 1,300 mm - Cutting length: 3,300 mm - Tilt angle: 45° - Stop: Digital - Adjustment: Electronic - Rip fence: Manual Pjdpfx Akjzrywwjijgu

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for carbide-tipped circular saws. Pgodpfx Aezl Snuekiou Sharpens the front and rear edges in a single pass. Technically inspected. Technical specifications in the PDF.

Condition: new, saw blade diameter 400 mm capacity 90 degrees: round 125 mm capacity 90 degrees: flat 170 x 125 mm capacity 45 degrees: round 122 mm capacity 45 degrees: square 120 mm turning speeds 3000 U/min engine output 2,2 kW weight of the machine ca. 95 Kg dimensions 0,8 x 0,6 x 1,5 m Aluminum circular saw - Pneumatic workpiece clamping system - Micro-spray system Pjdpjz Ek Azofx Akiogu