Used Hermle C600 for sale (122)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,132 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, table width: 465 mm, table length: 800 mm, table load: 200 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HERMLE C600V was manufactured in 1999. It features a fully enclosed design with dual front sliding doors and an ergonomic tool changer system. The machine is equipped with a HEIDENHAIN control unit, ensuring precision and reliability. If you are looking to get high-quality machining capabilities, consider the HERMLE C600V vertical machining centre we have for sale. Contact us for further details. Nedpfjy T Htkjx Ahuecw - Control On: 48,840 hours- Machine On: 48,303 hours- Program Run: 19,244 hours- Drive On: 42,175 hours- Axes in Motion: 19,519 hours- Tool Magazine 1-10: 58 hours- Tool Magazine 11-20: 622 hours- Tool Magazine 21-30: 40,269 hours- Current Axis Coordinates: X = -236.820, Y = +421.759, Z = +186.835- Enclosure Style: Fully enclosed with dual front sliding doors and red ergonomic handles- Electrical Supply Connection: Overhead industrial power sockets (METEENCE units visible: 2x blue 230V outlets, 3x red 400V CEE industrial outlets)- Tool Changer System: Chain/pocket style automatic tool changer visible via top rear access panel Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2002, operating hours: 138,929 h, functionality: fully functional, machine/vehicle number: 15233, feed length X-axis: 900 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, table width: 465 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 16,000 rpm, rotational speed (min.): 20 rpm, table load: 1,000 kg, overall weight: 6,000 kg, input voltage: 400 V, controller manufacturer: Heidenhain, controller model: iTNC 530, torque: 16,000 Nm, workpiece length (max.): 3,177 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 2,750 mm, spindle motor power: 15,000 W, nominal power (apparent): 30 kVA, number of spindles: 1, spindle nose: SK 40, tool diameter: 80 mm, tool length: 250 mm, tool weight: 6,000 g, operating hours of spindle: 30,484 h, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used HERMLE C 600 V, manufactured in 2002, for sale. Ncsdpfxszldkns Ahuew Manufacturer: HERMLE Model: C 600 V Year of manufacture: 2002 Condition: used If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 Nsdpfx Aozhv Scshuecw - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2002, total height: 2,700 mm, total length: 3,000 mm, total width: 2,300 mm, overall weight: 6,000 kg, table load: 200 kg, Hermle C 600 V vertical CNC machining centre, manufactured in 2002, with a Heidenhain TNC 430 control system. The machine has travel ranges of approx. 600 x 450 x 450 mm and is equipped with an SK40 spindle and a tool changer. A chip conveyor and a complete coolant system are included, meaning the machine is ready for immediate use. The machine is in used but fully functional condition and can be demonstrated whilst powered up. Table diameter: 280 mm Travel X-axis: 600 - mm Table load max.: 200 kg Dimensions (LxWxH) approx.: 3000 x 2300 x 2700 mm Travel Y-axis: 450 - mm Weight approx.: 6,000 kg Travel Z-axis: 450 - mm Ncjdpfjy S Nirex Ahujw Year of construction: 2,002 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Nedpfjy S Dddex Ahuscw

Condition: good (used), Year of construction: 1997, x-travel 600 mm Ncodpfswbi A Dox Ahuow y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Spindle hours: 13,465 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Nodpfxeyrirrs Ahuscw Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm MACHINE DETAILS CNC control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools. Ncodpfxexnkfkj Ahusw

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Machine will be in stock in 2 weeks Ncsdpfx Ahjzpfg Eouow

Condition: used, Year of construction: 1989, Technical details: x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm spindle taper ISO: 40 milling head speed: 25 - 4200 U/min table surface area: 560 x 1200 mm total power requirement: 15 kW weight of the machine ca.: 4 t Nsdpfx Aszn N Rxjhujcw dimensions of the machine ca.: 4,3 x 4,4 x 2,3 m with CNC HEIDENHAIN TNC 415 *

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, Njdpfx Ahozghngeujcw A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: used, Year of construction: 2011, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. Ncedpfxjzczhae Ahusw The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 Nodpfxjzaf Huj Ahujcw 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain TNC 426 rapid traverse 10 m/min table dimensions 1.200 x 550 mm spindle tunring speed 20 - 4.200 U/min spindle drive 7 kW tool taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dividing head, 4th axis Accessories, tools, and workholding devices shown are included in the scope of delivery Nedpfx Aoy Dh U Djhuocw only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Njdpfex Ry Atex Ahuecw Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 700 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 4,200 rpm, number of axes: 3, This 3-axis HERMLE UWF 1002 H was manufactured in 1995. It features an X-axis travel of 700 mm, Y-axis travel of 630 mm, and Z-axis travel of 500 mm. The machine has a table load capacity of 700 kg and a table surface area of 1000 x 490 mm. If you are looking to get high-quality machining capabilities, consider the HERMLE UWF 1002 H vertical machining centre we have for sale. Contact us for further details. Ncodpfjzk Inbsx Ahuew - Operating Voltage: 400 V / 3~- Control Voltage: 24 V DC / 220 V AC- Frequency: 50 Hz- Total Nominal Current: 33 A- Total Rating: 23 kVA (with IKZ) / 21 kW- X-Axis Travel: 700 mm- Y-Axis Travel: 630 mm- Z-Axis Travel: 500 mm- Net Weight: 6,800 kg- Table Load Capacity: 700 kg- Table Surface Area: 1000 x 490 mm- Coolant Tank Capacity: 240 Liters- Coolant Flow Rate / Pressure: 20 L/min / max. 4 bar- Electrical Drawing No.: HS 460-2- Standard Features: Full protective cabin, 5-axis contouring control, Cast iron/mineral cast composite construction in the machine base and cross support, Heat exchanger in the control cabinet, Brushless AC motors, Work area lights- Current Errors/Issues: Motor encoder Z: Amplitude too small

Condition: good (used), Year of construction: 1997, CNC milling center HERMLE U 630 S, serial number 12052, year of manufacture 1997, control system HEIDENHAIN, travel ranges: 800 × 560 × 510 mm, spindle speed up to 12,000 rpm, tool holder SK40. Ncjdpfx Ahoznlztsuew

Condition: good (used), Universal machining center HERMLE UWF 801, serial number 5798, control system HEIDENHAIN HS 144, travel ranges: 500 × 430 × 400 mm, spindle: SK40, spindle speed up to 2,000 rpm. Nodpfx Aeznlzmjhuscw

Condition: good (used), Year of construction: 2001, CNC milling machine HERMLE U 630 T, serial no. 14440, year of manufacture 2001, operating hours 14,701 h, control system HEIDENHAIN, travel ranges: 630 × 500 × 500 mm, spindle speed up to 7,000 rpm, tool holder SK40. Njdpfjznlzaex Ahujcw

Condition: used, Year of construction: 2010, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2010 Control : Heidenhain iTNC 530 Speed : 15000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : SK 40 Nsdpszng Hwofx Ahuecw Spindle: Technology:Motorspindle Speed:15.000 rpm Power (max.):15 kW Torque (max.):130 Nm Taper:SK 40 NC-Swivelroundtable: Technology:Swivelroundtable with Clamping plates A-Axis:-/+ 110° C-Axis:360° Clampingsurface:ø280 mm Tableloading (max.):250 kg In general: Toolmagazine:30 Stations Rapid travers in X/Y/Z:30 m/min Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Workpiecemeasurement:Touch probe, Renishaw OMP 40 Oilmistseparation:Mechanical extraction, Handte OE-DAH Setup operations:Electronic Handwheel Kinematicmeasuring:KinematicOpt Toolholder:Misc. used toolholder SK40 Further Equipment:Rinsing pistol

Condition: used, Year of construction: 1998, controller manufacturer: Heidenhain, controller model: TNC 430, _____ Description: Year of manuf. : 1998 Control : Heidenhain TNC 430 Speed : 15000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:15.000 rpm Power (ca.):15 kW Torque (ca.):130 Nm Taper:SK 40 Ncsdpfezng Hdjx Ahuew Workingtable: Clampingsurface:1.000 x 560 mm In general: Toolmagazine:30 stations Rapid travers in X/Y/Z:35 m/min Equipment/Accessory: Positionsensor:Direct in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Workpiecemeasurement:Touchprobe, Renishaw OMP 60 Toolbreakagecontrol:Laser, Renishaw TRS1 Oilmistseparation:Mechanical extraction, Handte OE-DAH Setup operations:Electronic handwheel Toolholder:Misc. used toolholder SK40 Further Equipment:Rinsing pistol

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Ncedpfx Ahozm Sphsuew Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T

Condition: used, Year of construction: 2007, x-travel 740 (915) mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 turning speeds 20-12.000 U/min feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 30/20 m/min tool taper SK 40 Njdpozkl Ekofx Ahuocw table surface area 900 x 528 mm max. table load 700 kg spindle hours 8.961 h total power requirement 32,5/17,5 kW weight of the machine ca. 7,3 t dimensions of the machine ca. 2,8 x 2,4 x 2,4 m Machining Center HERMLE U 740, built in 2007 Accessories: Tool holders, see pictures

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm z-travel 500 mm Nedjx Dndcepfx Ahuecw

Condition: used, Year of construction: 1990, x-travel 400 mm Nedpfjt Hxbwsx Ahuocw y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t dimensions of the machine ca. 736 m