Used Circuit Breaker for sale (2,549)

Condition: used, This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Ijdpfx Agjxxy Uis Dea Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design (solid neutral, heavy-duty models) Current Rating: Up to 1200A (model shown) Voltage: 480V Isdpfew Enquex Ag Dsa Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 (indoor) Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 12 units in stock

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Ijdpfexy Nf Hex Ag Doa Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: good (used), Year of construction: 2013, functionality: fully functional, EA Mini 2001 SLI Stock No.: 503612 Machine type / Device type: Sprue picker Manufacturer: Geiger Model: EA Mini 2001 SLI Year of manufacture: 2013 - All axes pneumatically driven - Repeat accuracy: ±0.2 mm - Combined part and gripper weight: up to 2 kg Ijdsxy I E Sepfx Ag Dea - Mains voltage: 230/110 V (50/60Hz) - Compressed air connection: 6 bar - Consumption approx. 10 Nl/cycle (without vacuum) - All EUROMAP 67 signals - Rotation module B-axis - Vacuum circuit - Metal gripper AJ2012 - Sliding console 500 mm - Unique high-speed travel system on Y-axis - Reject part evaluation Interface for injection molding machine: EUROMAP 67

Condition: used, functionality: fully functional, In this offer you are purchasing a used hot air dryer / textile dryer ‘Chiossi E Cavazzuti Duo 1200’ Object of sale: 1 x DUAL 1200 hot air dryer with the following features: The entire machine is equipped with circuit breakers and thermostats to prevent power and heating failures. The digital control panel also has a detailed alarm history to improve safety and maintenance during long working hours. DUO 1200 PRODUCTION DATA: Digital water-based ink - Print size A4 on T-shirt - Data may change depending on fabric material, size of drying area and ink curing requirements. Curing area: 2000×1200 mm 3 minutes curing time: 270 pieces/h 4 minutes curing time: 200 pieces/hour 5 minutes curing time: 160 pieces/hour 6 minutes curing time: 140 pieces/hour The DUO 1200 dryer is the perfect complement to a KORNIT or HEXA, which have a capacity of up to 220 light-coloured and 160 dark-coloured garments per hour. - The great advantage of these dryers, which have been specially developed for curing and drying digital prints on textiles, lies in the high air circulation: it facilitates and accelerates the evaporation of water-based digital printing inks with unrivalled results on the finished garment with a medium-length drying process. The matching Kornit HD6 is also available from stock. Please feel free to contact us! Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Ijdpfxewfcpfo Ag Dja Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, mileage: 730,552 km, power: 368 kW (500.34 HP), first registration: 05/2018, overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 6,800 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, Internal reference number for customer inquiries: 4-264 MAN TGX 26.500 6x4 Short Timber Transport Truck with TajfunLiv 150Z 9.6 Loader Crane Vehicle Description: Bodywork: - OptiPa stanchion superstructure - 4 ExTe D5 bolsters with 8 ExTe aluminum telescopic stakes - Reinforced steel front wall - Access step on passenger side - Step box on driver’s side - Toolbox on passenger side - Two snow chain holders - New tire tarpaulin Truck: - Equipment packages - Comfort Package 1 Driver - MAN Media Package Navigation MAN TGX 26.500 6X4 BL, wheelbase 4500 mm Engine: D2676LF51 – 500 HP / 368 kW, EURO 6 SCR – 2500 Nm, C-R OBD-C Transmission software for off-road operation (TipMatic OFFROAD) Gearbox: ZF 12 TX 2821 OD MAN TipMatic, with ZF-Intarder PTO 2 NA NTX/10 without flange f=0.96 (top) and NTX/10 with flange f=1.31 (bottom) Parking brake with pneumatic actuation for front axle brakes Cab with medium-high "XLX" high roof, 2440 mm wide, 2280 mm long Air-suspended comfort driver’s seat with lumbar support, shoulder adjustment, and heating Auxiliary air heater EBERSPÄCHER D4S A/C system AC R134A, CFC-free, with automatic climate control 1 sleeper berth with storage compartment (aluminum frame) Mattress for lower sleeper berth Radio MAN Media Truck Advanced 12V with 7" display and navigation preparation Navigation SD – Full Europe "Comfort" hands-free system for 2 mobile phones (steering wheel controls and Bluetooth® capable) Crane: TajfunLIV 150Z 9.6 TAJFUN LIV fully hydraulic timber crane Classification according to EN12999 Declaration of Conformity CE version Color: black Reach 9.60 m (double extension), lifting moment 141 kNm Internal hoses in telescopic extensions Slew drive Slewing range 425° Control valve PARKER H170CF Telescopic stabilizers Iodpfx Aexnn Eneg Dea Stabilizer legs swing up to 45° Fixed stabilizer pads Outrigger control with electrohydraulic Danfoss PVG 32 valve Dead center above cab Dual-circuit system Knee lever on lifting cylinder Lift cylinder protection Operating hours meter Work light on jib Spare parts catalog and user manual in German Continuous rotator 10 t Seat heating LED work lights Inclination switch Start / Stop function - Linear lever control (4+2) - Grab GO53x This is a non-binding offer. Intermediate sale, errors, and changes reserved.

Condition: used, Technical details: Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-ax Isdpfex Ag Epex Ag Dsa

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes Iodovt Ec Sopfx Ag Dsa - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: used, This listing is for the Hanna HI190M Magnetic Stirrer The unit is in full working condition and is ready for immediate use The Hanna HI190M is a compact and durable magnetic stirrer designed for efficient mixing in constrained lab spaces. Key Features Compact & Lightweight Design The device measures approximately 120 × 120 × 45 mm (4.8 × 4.8 × 1.8 in) and weighs between 610 g (12 V DC version) and 640 g (115 V version) Its small footprint helps free up valuable bench space Speedsafe™ Safety Mechanism This smart system prevents dangerous overspeed when the stir bar is suddenly removed, using an opto-sensor and a frequency-voltage converter to monitor and limit speed Iodpjxv Dvxofx Ag Dsa Adjustable Speed Range Offers stirring speeds from 100 to 1000 RPM, providing precise control over mixing Durable Housing The ABS plastic casing resists many chemical spills, enhancing longevity and safety Power Indicator LED A handy LED lets you know at a glance that the unit is powered on and operating Fuse & Grounding Protection The 115 V and 230 V versions include a replaceable fuse for short-circuit protection, and the case is grounded for additional safety

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Iodpfsv Srfdsx Ag Dea Good condition

Condition: good (used), Year of construction: 2012, ASPIRATION POLYTECHNIK VACUMOBIL VT 160-L 1950m3/h, 2.2kW motor Can be installed in the work area (depending on dust type) Low residual dust concentration in return air < 0.1 mg/m³ (H3) according to TRGS 553 Closed air circuit, 100% utilization of thermal energy Large collection capacity with 1 mobile bin Height less than 2 m (intake mouth height center: 1.5m) Programmable control with automatic start (potential-free contact) No rupture vent required for St1 dusts IFA-certified filter media (retention rate 99.95%) Low energy consumption, high suction power IE3 motor, energy efficient Automatic filter bag cleaning Iedpfxsxzt Ste Ag Dea

Condition: used, Year of construction: 2019, operating hours: 4,725 h, Equipment: all wheel drive, Loading bucket approx. 1.8 m³, hydraulic quick-change system, pallet fork, 3rd hydraulic circuit, central lubrication system, good condition, vehicle may have advertising decals and/or lettering. Our offer generally does not include a new roadworthiness inspection (TÜV). If a new inspection is desired, we are happy to provide a quote from our partner workshops! The vehicle may feature advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We will gladly prepare a financing or leasing offer for this item. Iodpfxjxbz Aye Ag Doa Please contact us!

Condition: used, Technical details: Total force (nominal): 1000 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Isdpfx Agox Ag Aze Dsa Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Iodpfx Ajv Dxw Rjg Dsa Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: used, This listing is for the APC Back-Ups CS 500 UPS The unit is in full working condition and is ready for immediate use Key Specs & Performance Capacity: 500 VA / 300 W – suitable for basic PC setups, modems, routers, or low-power peripherals Runtime: ~2.4 minutes at full 300 W load ~13.8 minutes at half load (150 W) Topology: Off-line (standby) UPS with ~6 ms transfer time Waveform Output: Stepped approximation to a sine wave Connections & Interfaces Input Connection Type: IEC 60320 C14 Output Connection Types: Iodpoxv Duzofx Ag Dja 3 × IEC 60320 C13 (Battery Backup + Surge Protection) 1 × IEC 60320 C13 (Surge Protection Only) 2 × IEC jumper surge-protected outlets Number of Cables: 2 included Data-Line Protection: RJ-11 phone/fax/DSL line Communication Ports: USB + optional RS-232 Management Software: Supports APC PowerChute Personal Edition Battery & Power Battery Type: Sealed lead-acid maintenance-free (VRLA) Battery Cartridge: APC RBC2 Battery Recharge Time: ~8 hours User-replaceable: Yes, hot-swappable Battery Life Expectancy: 3–6 years Cold-Start Capable: Yes Self-Test: Automatic periodic testing Surge & Safety Features Surge Energy Rating: 300–310 J Noise Filtering: Full-time EMI/RFI filtering Audible Alarms: Yes – for battery use, overload, low battery LED Indicators: Status display panel Certifications: CE, VDE, GOST, C-Tick Resettable Circuit Breaker: Included Physical Characteristics Height: 16.5 cm Width: 9.1 cm Depth: 28.4 cm Net Weight: 6.03 kg Color: Beige/Light grey (typical for CS series) Noise Level: Approx. 40–45 dBA

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW Isdedx R Tfjpfx Ag Dsa - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: good (used), mileage: 121,054 km, power: 350 kW (475.87 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: AdBlue, Bluetooth, air conditioning, cruise control, electric window regulation, fog lights, parking heater, seat heater, soot filter, spoiler, - Aluminum fuel tank - Leaf suspension - Bluetooth - Brake booster - Electrically adjustable exterior mirrors - Electronic Brake System (EBS) - EPS - Low noise - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox Front axle: Steering; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Unladen weight: 7,499 kg Payload: 11,501 kg Gross vehicle weight (GVW): 19,000 kg Main inspection (APK): valid until 07/2026 Technical condition: good Visual condition: good Vehicle number: Mercedes Benz Actros 1848 StreamSpace L 2.30 / Euro 6 / 121,000 km VIN: WDB96340310274644 Suspension: Leaf / air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater Iodpfjx Aik Uex Ag Dja Proximity control assist Lane departure warning system Emission standard EURO 6 Operating hours: 7,003 h Special equipment: Trailer socket 15-pin 7+7-pin, audio system: CD radio (Bluetooth), right exterior mirror with maneuvering position, compressed air connection in driver's cab, air horn, driver's cab: with air suspension, suspension: front springs 7.5 t, 2-leaf, fire extinguisher, tinted windscreen, integrated rear, folding table in console, automatic climate control, fuel tank: 510 L aluminum, air intake behind cab, side air deflectors, reinforced engine brake, power take-off MB 131-2c, programmable special module, PremiumComfort lower mattress, frame lowering without bellows residual pressure control, spare wheel, acoustic reverse warning (external warning signal), fleet management system interface, circuit breaker, driver's cab seats: comfort driver's air suspension seat, exterior sun visor, additional 12V socket, additional 24V socket in passenger footwell, carpeting on engine tunnel, preparation/switch for lift axle on semi-trailer/trailer Additional equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, Actros 4, trailer socket 24V / 15-pin, work lights, exhaust outlet to the right outside, exterior mirrors electrically adjustable and heated, rear axle differential lock, steel air reservoir, medium air unit, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: lane departure warning, driver's cab: width 2.30 m, driver's cab: L StreamSpace, cab floor with 170 mm engine tunnel, suspension: leaf/air, front spring bracket aluminum, electric window lifters, generator 100 A, 12-speed transmission - type: G 281-12, urea tank (AdBlue): 60 l, rear axle crown wheel 440, info display 10.4 cm, body/superstructure: tractor unit, comfort lower bunk, comfort central locking, communication interface, 3-piece mudguard, radiator louver, regulated power steering pump, 2-stage air compressor, engine 12.8 l - 350 kW R6 diesel (OM 471), engine compartment encapsulation, wheelbase 3,700 mm, ramp mirror, residual heat utilization, disc brakes front and rear axle, seat cover/upholstery: fabric, passenger functional seat in cab, driver's seat backrest foldable, voltage converter 24V/12V 10 A, front splash guard, front axle stabilizer, external left storage compartment, driver's cab 24V socket, tachograph / EC control device, cab door extension, underbody covers...

Condition: used, mileage: 362,695 km, power: 309 kW (420.12 HP), first registration: 02/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, HydroDrive, PTO (Power Take-Off), emergency brake assist, lane assist, stability control assistant, ABS, ASR, differential locks, start assist, hill start assist, cruise control, automatic climate control, additional hot water heating, multifunction steering wheel, heated and electrically adjustable exterior mirrors, electric windows for driver and passenger doors, driver’s comfort suspension seat, 1x sleeper bed, refrigerator, roof hatch, battery isolation switch, fog lights, battery isolation switch, 2 x rotating beacons, hydraulic connection for trailer dual-circuit, air suspension with lift/lower function on rear axle, vehicle may display advertising stickers and/or lettering. Our offer generally does not include a new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. Iedpsww Skpjfx Ag Dsa We are happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity Isdpfeh U Rzgjx Ag Doa 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, This listing is for a Belimed PST 11-6-18 HS2 Steam Sterilizer. The unit is in excellent working condition and ready for immediate release. The Belimed PST 11-6-18 HS2 is a high-capacity pharmaceutical autoclave designed for saturated steam sterilization of laboratory and production equipment, including heat- and moisture-stable porous and non-porous loads. Equipped with an integrated Filter Integrity System (FIS), it ensures reliable sterilization and validation compliance in regulated environments. Engineered by Belimed Life Science in Germany, this system delivers precise temperature control, high process reliability, and full compliance with GMP/cGMP standards, making it ideal for research, pilot, and GMP production facilities. The HS2 configuration features a double-door chamber, water-jacket cooling, vacuum-assisted drying, and a user-friendly B-Touch interface with integrated process control. It is optimized for efficient sterilization cycles with minimal operator intervention. ----- Key Features - GMP-ready design supporting pharmaceutical-grade sterilization processes (6050/6065) - Integrated Filter Integrity System (FIS) for real-time monitoring and validation compliance - User-friendly B-Touch touchscreen interface with Siemens WinCC Unified or Rockwell FT Optix - Water-jacket cooling and vacuum drying for rapid cooling and effective drying of chamber loads - Double-door HS2 configuration optimized for ergonomic loading and unloading - High-quality AISI 316L stainless steel construction with hygienic surface finishes (Ra < 0.8 µm) - Automated operation with redundant sensors and independent measurement circuits for reliable sterilization - Compliance with GAMP5, 21 CFR Part 11, Annex 11, and optional ASME BPE certification - Supports modular accessories including trolleys, batch carts, perforated or wire-mesh shelves, and cleanroom integration ----- Technical Specifications - Manufacturer: Belimed Life Science (Germany) - Model: PST 11-6-18 HS2 Iodpfoxmi Hqsx Ag Doa - Sterilization Processes: 6050 / 6065 (Steam, Pre-Vacuum, Gravity) - Filter Integrity System (FIS): Yes - Chamber Dimensions (W × D × H): 1200 × 600 × 1800 mm - Usable Chamber Volume: 1,296 L - External Dimensions (H × W × D): 2100 × 2350 × 1910 mm - Weight: Approximately 1,300 kg - Chamber Material: AISI 316L Stainless Steel - Surface Finish: Ra < 0.8 µm (≤ 0.6 µm optional) - Door Type: Double-door HS2 - Loading Type: Ground loader (GR) - Cooling System: Water-jacket cooling - Vacuum System: Integrated water-ring vacuum pump with optional water recovery - Control System: B-Touch interface with PLC - Electrical Supply: 400 V / 50 Hz (other voltages optional) - Compliance: GMP / cGMP, 21 CFR Part 11, Annex 11, ASME BPE options - Year of Manufacture: Available on request - Serial Number: Available on request ----- Applications Ideal for terminal sterilization in pharmaceutical and biotechnology industries, including: - Sterilization of laboratory glassware and equipment - Sterilization of production equipment and components - Sterilization of liquids in open containers - Sterilization of porous and non-porous loads For more information or to schedule a viewing, please contact: Phone: Email:

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm Ijdpfehkz Hmox Ag Doa splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, mileage: 92,783 km, power: 100 kW (135.96 HP), first registration: 05/1999, overall weight: 7,490 kg, fuel type: diesel, color: green, next inspection (TÜV): 01/2026, gearing type: mechanical, emission class: euro2, loading space volume: 2 m³, loading space width: 1,890 mm, loading space length: 1,950 mm, loading space height: 400 mm, total length: 4,390 mm, total width: 2,300 mm, total height: 3,050 mm, number of seats: 2, Equipment: all wheel drive, Mercedes-Benz Unimog Winter Service Vehicle with snow plow, flatbed (dimensions: 1950x1890x400 mm), single-circuit hydraulic system, rear dual hydraulic couplers (ZELLE 1), front quadruple hydraulic couplers (ZELLE 1 and 2), mounting brackets at the rear and center, gearbox power take-off with 4-bolt flange, cab roof raised by 120 mm, sound and thermal insulation for the cab, high-mounted exhaust, ABS trailer socket 24V 7-pin / 5-pin, trailer socket 12V 13-pin, left-side bracket for beacon, headlamp leveling system, vehicle may feature advertising stickers and/or decals. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops! Vehicle may feature advertising stickers and/or decals. Our general terms and conditions of delivery and payment apply. Isdpfx Agoxa Ticj Dsa We are happy to provide you with a financing or leasing quote for this unit. Please contact us!

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Ijdpfxexv A N Re Ag Dsa Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Iedpfx Aehk Df Dsg Dsa Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation Iodpfx Aoxgbxfjg Dsa - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -