Used Circuit Breaker for sale (2,503)

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm Hnodpfxoxmfato Aaceu spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Hsdpfx Aeu Th D Rjacsnu Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AE/020112, total width: 1,300 mm, overall weight: 2,750 kg, number of rollers: 4, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Overall width: 1,300 mm Electrical data Rated voltage: 400 V Frequency: 50 Hz Phases: 3 ~ Rated current: 180 A Short-circuit current: 10 kA Max. load current: 420 A Weight: 2,750 kg EQUIPMENT Two rollers at the top Two rollers at the bottom Hjdpfx Asxmhiwsacenu Note: The machine was dismantled as part of a liquidation and is loaded onto a truck. The machine was fully operational at the time of dismantling.

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Hjdpsxmr Uqefx Aaconu Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Throat depth: 225 mm Hnjdpsxlkq Ijfx Aacou Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console - Front crankshaft support bearing - Overload protection via shear plate - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition

Condition: new, overall weight: 45,000 kg, maximum load weight: 35,442 kg, axle configuration: 3 axles, loading space length: 16,550 mm, loading space width: 2,500 mm, loading space height: 1,350 mm, Year of construction: 2025, total width: 2,540 mm, Equipment: ABS, Brand new Kässbohrer Maxima extendable tele HD platform trailer Immediately available TECHNICAL INFORMATION: Fifth wheel height 1,250 mm * External length 13,535 mm * Gooseneck length 4,285 mm * Platform length 9,100 mm * Extension *7,450 mm platform extension * Extension locking position 500 mm * Gooseneck 180 mm * Wheel base 8,130 mm * Axle distance between the 1st and 2nd axle 1,360 mm * Axle distance between the 2nd and 3rd axle is 1,810 mm * Axle load 9 tons technical load capacity * Axle load 27,000 kg Kingpin capacity 18,000 kg technical kingpin capacity * Overall width 2,540 mm * Total weight Technical total weight [80 km/h] 45,000 kg * Total weight Technical gross vehicle weight [60 km/h] 46,000 kg * Empty weight ±%3 *9,558 kg * Swing door rear 2,450 mm CHASSIS: Number of axles 3 ST * BPW axles with air suspension and disc brakes * The two front axles are fixed and the rear axle is movable. * Air suspension including 1 load gauge * Overload-sensitive manual 1st axle lift system * Wabco, EBS 4S/3M brake system * Anti-lock braking system electro-pneumatic dual-circuit brake system * Lighting system in 24 volts with 2 x 7 + 1 x 15 bolt bushings * Tires 6-fold 385/65 R 22.5 CHASSIS: Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm omega profile reinforced 30 mm hardwood floor * King pin 2" king pin with screw connection * Mech. uncoupling support at the front Telescopic support winch with 50 tons static capacity LOAD SECURING: Lashing rings * Stake pockets * Plug-in stanchions * Container locks suitable for 1x20 ft., 2x20 ft., 1x40 ft. and 1x45 ft. container * Front wall made of steel material with a height of 1,500+500 mm with Code XL certificate ACCESSORIES: 1 piece stainless steel tool box with dimensions 1,000 mm x 500 mm x 500 mm (W x D x *H) Hnedpfx Aajlz Hliecou * Standard ladder * Side impact protection steel side impact protection in accordance with regulation 89/297/EEC * Stake box *18 pieces, mounted on the front plate * 2x2 extra-wide panels with LED lighting * Rotating beacon COLORS: Color of the chassis RAL 3020 traffic red We are happy to provide you with further information

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle Hnodpfsxmd T Sex Aaceu - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), empty load weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h Hnedou Thh Espfx Aacou bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2014, total height: 2,870 mm, table width: 540 mm, table length: 660 mm, space requirement width: 2,560 mm, space requirement length: 2,200 mm, CONTROLS .. CNC controls TECHNICAL SPECIFICATION .. current generation (max): 3600 A .. Table-size length: 660 mm .. Table-size width: 540 mm .. Working head: mping surf.: 375 mm .. .. x: 545 mm DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 2560 mm .. total height: 2870 mm The precision electrochemical metal machining (PECM) process is the further development of electrochemical countersinking. High-precision tools can also be machined from super alloys (Inconel, Hastelloy, etc.) and PM steels without process-related tool wear. Natural granite machine frame Working area 800 mm x 640 mm (W x D) Machine table 660 mm x 540 mm (W x D) Maintenance-free precision work axis with direct drive Fixture attachment via 6 T-slot rails (M10) in the machine table Real-time system for process control and short-circuit detection Standard PC keyboard, mouse and touchscreen Water-cooled, modular generator up to 3,600 A Automatic electrolyte preparation system - PEM Mechanik - PEM Control - PEM Power - PEM Aqua Hsdpfx Aasxm Rxnjcenu

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: TET081P5-NF - 2200320672, cooling capacity: 21.9 kW (29.78 HP), type of input current: three-phase, overall weight: 341 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 3.69 m³/h, pump pressure: 5.04 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler / chiller / air-cooled water chiller Type: TAEevo Tech 081P5-NF Manufacturer: MTA S.p.A. The TAEevo Tech 081 P5-NF is a compact, air-cooled water chiller suitable for outdoor installation (operating range: -5°C to +46°C). Includes crankcase heater, phase monitoring, 115-liter buffer tank, integrated P5 high-pressure pump, 14-liter open expansion vessel, and NON FERROUS evaporator. Adjustable chilled water outlet temperatures from -10°C to +30°C. Hedpfxew S E Ucs Aacjnu Cooling capacity: 21.9 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 3.69 Available pump pressure (bar): 5.04 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 14 Max. current (A): 24 Start-up current circuit (A): 119 Protection class: IP54 Dimensions: Length (mm): 1862, Width (mm): 761, Height (mm): 1437 Weight (kg): 341 Connection: Rp 1"1/2 Serial number: 2200320672 Year of manufacture: 2018 Condition: Visual 2-3, Technically in good working order Used Price: on request in euros (plus VAT ex works Nettetal) – 3 months warranty Used machines may show cosmetic defects due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Manufacturer: Guedu Year : 1986 Type : Reactor dryer Engine : hydraulic Reactor volume: 280 L Shell circuit : Tank: 14.6 L / 0.9 m2 Bottom: 13.75 L / 0.55 m2 Corrosion allowance: 1 mm Test pressure (half shell): 12 bar Hnsdpfx Aexdd Eceacju Working pressure (half shell): 6 bar steam Test pressure (tank): 6 bar Working pressure (vessel): 3.99 bar gas and 10 torr vacuum Operating temperature: – 20°C + 160°C Welding coefficient : 0,7

Condition: used, functionality: fully functional, overall weight: 2,500 kg, NILFISK Cleaning Machine, Scrubber Dryer Model: CS7000 ecoflex Drive: electric, battery-powered Condition: see photos / excellent condition Test drive possible Item No.: CS7000 ecoflex Manufacturer: NILFISK Year of manufacture: see photo – visually excellent Hour meter displays "69" (likely new circuit board) Hydraulic discharge 4 brushes Electric operation Battery at full capacity Weight: approx. 2500 kg Will be handed over in working order, including charger Next NILFISK service due: 12/2026 New price with this configuration: approx. €98,000 Price quoted for collection ex stock 47441 Moers Various cleaning and scrubber dryers in stock We offer as shown in the pictures. Viewing is expressly encouraged. General information: We offer various items here, described as accurately as possible and supported by detailed photos. No further details can be provided for the item. You have the option to view the item by prior telephone arrangement on Tuesdays and Thursdays between 9:00 am and 4:00 pm. On request, the item can be taken immediately. Hnedpfxswylgie Aacju Unless otherwise expressly stated, this offer is for USED EQUIPMENT. We sell as depicted in the photos. All offers are ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs vary by distance, approx. €800 net) All dimensions are approximate.

Condition: used, overall weight: 48,000 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, loading space length: 12,630 mm, loading space width: 2,550 mm, loading space height: 870 mm, first registration: 08/2022, next inspection (TÜV): 04/2026, Year of construction: 2022, total width: 2,550 mm, total height: 870 mm, Equipment: ABS, 3-axle semi-low loader HUMBAUR HTS30K with excavator boom trough First registered August 2022, like new condition Dimensions (L x W x H) 12,630 x 2,540 x 870 mm Drive-on angle approx. 10° Lowbed length 8,680 mm Highbed length 3,500 mm Fifth wheel height approx. 1,200 mm Unladen weight 10,370 kg Kingpin adjustable by 340 mm for 2+3 axle tractors Single-piece galvanized ramps with rubber coating, length 3,150 mm, width 750 mm Ramps hydraulically foldable and movable (dual-circuit hydraulics required from the tractor) 5 pairs of stake pockets and ramp rails Extra-wide package with quadruple warning signs, with folding outriggers and spruce planks Steel toolbox under the left loading area for storing the planks Hydraulic rear support Load securing: 5 pairs of 10-ton lashing rings in the low bed 5 pairs of 6-ton lashing rings in the outer frame, bolted 3 pairs of 6-ton lashing rings in the high bed 6 pairs of 2-ton lashing rings above the outer frame wheel cutout 3 pairs of 3-ton lashing rings in the low bed outer frame Hsdpfx Aexmpxasacjnu Chassis frame hot-dip galvanized, visible sides painted SAF axles with drum brakes 1st axle: LIFT AXLE 3rd axle: SELF-STEERING WABCO Trailer EBS WABCO Smartboard 12 tires: 235/75 R 17.5, tread depth 80% RENTING is the new BUYING, also available from us as a RENT or Full-Service LEASE immediately-----

Condition: good (used), Year of construction: 2015, operating hours: 19,173 h, functionality: fully functional, pressing force: 150 t, filling opening width: 1,100 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 35,800 kg, oil tank capacity: 4,300 l, Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 piece maintenance platform on the baling channel 1 piece Feed hopper 1 piece Drop chute 10 pieces wire reel stands 2 pieces wire drawing stations with deflection rollers 1 set of machine documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation) Remarks: Hodpfxju Thfde Aacsnu The machine is still completely assembled and available at short notice. Dismantling and loading is the responsibility of the buyer. The documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation declaration) is available in German. An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.

Condition: used, Year of construction: 1996, MAKA HC 57 R (Robot) 5-Axis CNC Machining Center Type: HC-57 R / Machine No. 420 747 / Year of Manufacture: 1995 / Circuit Diagram No. 320 177 The machine is operational and extremely robustly built (milling spindle, tool changer, vacuum pump, supports, etc.) and comes equipped with existing electronics (controller, plug-in boards, converters). The machine shows age-related wear, particularly on wiring, air lines, and lubrication lines for the central lubrication system, etc. It is running and ready for use, but due to the aforementioned wear, it is being offered as a source of spare parts or for refurbishment. Hnsdpfxew Rq S Rj Aaceu Collection from 41334 Nettetal, workshop loading edge. Price negotiable. If no buyer is found for the fully assembled machine, the machining center will be dismantled and the spare parts will be offered individually. Interested parties seeking spare parts for a MAKA machine can contact us in advance for details or parts inquiries.

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. Hodeu Ruruopfx Aaconu - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: used, New: No Cargo space capacity: 5.000 l VAT/margin: VAT qualifying Hedpfx Asxddz Deaconu Material: Stainless steel Diameter 1320 x depth 3500 Circuit in double insulated jacket (Diameter 15) Drain D.35 Door 300×450 (position: bottom of shell) 3 inlets on dome Diameter 30 2 Outlets on shell for level control. Conical bottom and dome 3 feet Total height : 4100

Condition: defective spare-parts repository (used), functionality: unexamined, Year of construction: 1983, machine/vehicle number: K2062, control type: CNC control, working width: 4,000 mm, overall weight: 7,500 kg, power: 7.5 kW (10.20 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, Equipment: lower tooling, upper tooling, We are selling our Safan CNCB 110-4300 press brake from 1983. The machine comes with two tooling sets and extensive documentation. A few months ago, the hydraulic pump failed, but we were able to procure brand-new replacement parts, including the cartridge. The machine is now reassembled, can be switched on, and is filled with oil. At present, there appears to be a minor issue with the oil pump or the pump's check valve. When the pump is started, the circuit breaker trips due to overload. This seems to be only a minor fault. The machine is being sold as defective and without any warranty. Please note the machine weighs 7.5 t for collection. The tooling is segmented and features a Promecam-style clamp. Hnsdpfx Aaoxl D Dbecju We can assist with loading using our own crane. Transport arrangements, including a low-loader due to the height, are the buyer's responsibility.

Condition: used, mileage: 338,165 km, power: 335 kW (455.47 HP), first registration: 07/2020, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, 1846 Actros Tractor Unit HAD 4x4 Special equipment: - Front axle load 8.0 t - Work lights - Equipment package: Air Conditioning - Equipment package: Media - Equipment package: Safety - Right exterior mirror with maneuvering position - Interactive multimedia cockpit - Aluminum air tanks - Two air horns on cab roof - Assistance system: Turn Assist - Assistance system: High Beam Assist and cornering light - Cab with air suspension - Suspension: 8.0 t front springs, 2-leaf - Vehicle without exterior mirror camera (MirrorCam) - Vehicle without radiator grille shutter - Vehicle without aerodynamic underbody panelling - 12-speed transmission - Type: G 211-12 - Manual sliding roof (steel) - Hydraulic Auxiliary Drive (HAD) - Cabin air filter for construction vehicles - Integral rear - 3-piece mudguards - Fuel tank: 390 liters aluminum, left side - Multifunction leather steering wheel - Air intake behind cab - 2-cylinder air compressor - Mounting plate / fifth wheel plate 40 mm for fifth wheel coupling 20 t - Reinforced engine brake - PTO MB 131-2c - Wheelbase variant 3850 mm - Frame lowering without residual pressure control - Frame overhang 1050 mm - Smoking package - Rain sensor - Retarder - Rotating beacon left/right - Low-maintenance fifth wheel coupling - Drawers under bed edge - Headlight protective grid - Circuit breaker Hjdpfow Iitnjx Aaconu - Seat cover/upholstery: passenger seat velour - Seat cover/upholstery: driver seat velour - Seats in cab: Comfort suspension driver seat - Exterior sun visor - Sun protection blinds for side windows, driver and passenger door - External storage hatch left - Additional 12V/15A socket in passenger footwell - Cab door extension - Preparation/switch for lift axle on trailer/semitrailer - Preparation for 4 surround cameras (display on dashboard monitor) - Straight front axle - Curtain for sleeper cabin Additional features: - Emission standard EURO 6 - Storage above windshield with cover - Axle configuration: 4x2 - Actros 5 - Actros L cab - Heated starting/front mirror - Trailer electrical and brake connection, low - Trailer socket 24V / 15-pin - Step on cab left - Exhaust to right side - Equipment package: Powertrain 2 - Batteries arranged side by side - Rear axle differential lock - Air connection in cab - Air drier unit with condensate monitoring, medium size - Automatic driving light activation (light sensor) - Assistance system: Attention Assist (fatigue detection) - Assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5) - Assistance system: Lane Keeping Assist - Cab: fixed entry - Cab: interior chrome package - Cab: hydraulic tilting mechanism - Cab: L ClassicSpace, 2.30 m, tunnel 170mm - LED vehicle outline lights - Leaf/air suspension - Electric windows - Tinted windshield - Vehicle without rear window - Generator 100A, regulated - Speed limiter system - Urea tank (AdBlue): 60 liters - Rear axle with active lubrication, unregulated - Rear axle ring gear 440 - Body/chassis: Tractor unit - Lower comfort bunk - Comfort central locking - Electronically regulated power steering pump - Heated air dryer - Engine 10.7L - 335 kW inline 6-cylinder diesel (OM 470) - Engine variant OM 470 - Application: local distribution - Wheelbase not specified - Ramp mirror - Residual heat utilization - Disc brakes on front and rear axles - Remote control (2 keys) - Blinking LED side marker lights - Seats in cab: passenger function seat - Seats in cab: fold-down driver's seat backrest - Front splash protection (Truncat

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Hnjdpfx Aou Thpnjacou Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: good (used), Year of construction: 2007, operating hours: 47,791 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h The rotary unit is 6-way R3/8 inch for a maximum of 3 media circuits, medium max. 120 degrees C with 2 water circuits and 1 hydraulic circuit: 2W1H. Hnedpfx Aasxfq Utscou The 2nd vertical injection unit 80V is equipped with a 22 mm plastification. The injection volume is 38 ccm with 1590 bar injection pressure. clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm horizontal injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar vertical injection unit screw diameter: 22 mm swept volume: 38 ccm injection pressure: 1590 bar equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Year of construction: 2025, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Steel welded frame with two maintenance doors - left and right. Powder coated RAL 9002 • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows 10 operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • Powder coated RAL 9002, ESD window and sliding doors Hnjdpfx Aow Et H Ioacsu Optionally a vacuum cleaner unit can be offered later.

Condition: used, Year of construction: 1977, total width: 800 mm, total length: 1,000 mm, total height: 2,450 mm, Applicable material: Food Manufacturer: BOSCH – STRUNCK Model: FKL A 06 Year: 1977 Type: Automatic filler Plunging filling heads Filling pumps per set: 6 units 1 group of pumps up to 100 ml 1 group of pumps up to 200 ml Piston stroke adjustment: mechanical Motor power: 0.37 kW Laminar flow Filling head storage system withclosed circuit for cleaning. Machine dimensions: 100 x 80 x 245 cm Hedpfx Aaewbn Nvocsnu Video in running condition available

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: Hjdpsu Tg I Djfx Aaconu New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Hnjdsu Thx Rspfx Aacsu Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.