Used Chambered Doctor Blade for sale (7,110)

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber allows you to evaluate the performance or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal temperature and humidity transfer to the test specimen. The air treatment compartment is located at the rear of the interior chamber. The system units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate control cabinet, with the operator panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point area: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % RH over time The technical data apply to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, radiant heat, or additional features. Dimensions: Interior (Test Chamber/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: Fpsdpsx Eaxbjfx Afnsc - Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, with stepless capacity adjustment via electronic monitoring and control system - Environmentally-friendly refrigerants: R 23 / R 404 A Notes: - Inspection available by appointment (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request - Scope of delivery: (see picture) (Subject to technical modifications and errors in specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Fpedox D Abpepfx Afnjc Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: good (used), Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 100 mm Max cutting height 100 mm Fpodpfoyi Aaqjx Afnec Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Fedpfxsrt U Nuo Afnspc Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 3,100 mm, total width: 3,100 mm, stroke length: 950 mm, column diameter: 130 mm, mold height (min.): 900 mm, clamping force: 35,000 kN, pressure: 400 bar, Installed and commissioned with dry, test run only. - Two‑platen machine - Max locking force: 35,000kN - Injection force: Approx. 390–420kN (varies by plunger size) - Plunger diameter: Ø130mm - Plunger stroke: 950mm - Shot weight (Al): 6.5–8.5kg, depending on plunger - Projected area at 400 bar: 8,750–9,000cm² (calculated from 35,000kN clamping force) - Platen size (H × W): 3100× 3100mm - Distance between tie bars (H × W): 1950×1950mm - Die height (min / max): 900/1350mm - Die opening stroke: 1200mm Støtek melting system with - Støtek SMG 3.0_7.0 two chamber gas fired melting shaft furnace with ingot charging elevator, furnace melting capacity approx. 1.5t/h - Støtek DTI 6020 holding furnace with Fuco-Heg MBS 2000 molten metal treatment/rinsing station - Støtek AMET 1700 dosing furnace LK Impress Plus DCC 3500 die casting machine with - Siemens PLC S7-1500 controls - ABB IRB 6650S die release agent spray robot - Wollin OSA 15-2-C die release agent supply system and spray head Fsdpfx Ajygxr Rofnepc - AED 181-080 die lubrication dilution system - Fondarex Highvac Premium 2C 200 die casting vacuum system with air tank and vacuum pumps - 5x IECI PFN 330 2-Z oil temperature control units - 5x IECI PF-ZH 1802-Z water temperature control units - KMA Ultravent UV 20000EE fume extraction and filter system - ABB IRB 7600 robot for die casting machine unload, trim press load/unload and cooling station load - LK WB-100 1,000kN trim press with trim conveyor - ABB robot for cooling station unload, laser marking and outfeed - Keyence MD-X 1500C 3 axis laser marking system - Outfeed conveyor with cooling tunnel A quantity of spare parts is available with the line.

Condition: new, Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW heating: natural gas burners power: 2 x 100 kW Fodpfsdyvipsx Afnopc useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Condition: new, High temperature chamber furnace, make VEI max. temperature: 1.200°C useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW Fsdjdyvkyjpfx Afnspc

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace Fodpfx Asg Dgymefnopc internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Condition: used, Year of construction: 2019, For enquiries about the attachment, please contact Mr. Herden (by phone). Tuchel SK-F 180 Snow Blade / 1850mm / Year of manufacture: 2019 / from Kramer 5040 / in stock & available immediately Price: €2,290.00 net / €2,725.10 gross - Clearing width (straight/angled) 175/154 cm - Overall width (max. extension) 185 cm - Weight (excluding mount) 185 kg - Height 70 cm - Angling up to 30° Equipment features: - Hydraulic side adjustment - Steering castors with infinitely adjustable height - Marker lights (LED) - Edge deflectors left & right The attachment is in like-new condition. We have a very large selection of various attachments in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we are also happy to provide a financing offer. We are an official sales and service partner for: DMS Holp OilQuick Westtech Weber MT Magni telehandlers Seppi M. JCB construction machinery Mercedes-Benz Iveco Fpodpfsyiy E Rsx Afnjc In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. !!Errors and prior sale excepted!! Internal ID: 600004 = Further Information = Intended use: Agriculture Unladen weight: 185 kg Working width: 1,750 mm For further information, please contact Tobias Ebert.

Condition: used, Year of construction: 2011, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Pronar PU-1700 Snow Plough / 2011 / up to 1,930 mm working width Price: €2,090.00 net / €2,487.10 gross - Clearing width depending on operating position: 1,680 mm / 1,930 mm - Number of working positions: 4 - Wear edge: Deflectable rubber - Wear edge shock absorption: Spring-mounted - Hydraulic control: 16-20 MPa - Power supply for marker lights: 12 V - Working speed: 10 km/h - Power requirement: 25-55 HP - Own weight: 355 kg We have a very large selection of various attachments in stock, available for immediate delivery! Mr. Herden (phone) will be happy to advise you. Upon request, we can also provide you with a financing offer. We are an official distribution and service partner for Westtech. We are an official distribution and service partner for OilQuick. We are an official distribution and service partner for Holp. We are an official distribution and service partner for Magni telehandlers. We are an official distribution and service partner for DMS. We are an official distribution and service partner for Gierking GMT. We are an official distribution and service partner for Weber MT. We are an official distribution and service partner for Seppi M. We are an official distribution and service partner for JCB construction machines. We are an official distribution and service partner for Mercedes-Benz. We are an official distribution and service partner for Iveco. With over 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! Internal ref. no.: 1375 = Further information = Intended use: Agricultural Fsdpfx Ajyixr Njfnopc Unladen weight: 355 kg Working width: 1,930 mm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2019, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Tuchel L-SF 225 Snow Plough / 2,250 mm / Year of manufacture: 2019 / in stock & immediately available Price: €2,790.00 net / €3,320.10 gross Fpsdpfxoyiw Sbj Afnec - Clearing width (straight/angled): 225/196 cm - Total width (max. extension): 235 cm - Weight (without mounting bracket): 300 kg - Height: 82 cm - Swivel angle up to 30° Equipment: - Hydraulic side adjustment - LED marker lights We have a very large selection of various attachments in stock for immediate delivery! Mr. Herden (phone) will be pleased to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! Internal ID: 300001 = More information = Intended use: Agriculture Unladen weight: 300 kg Working width: 2,250 cm Please contact Tobias Ebert for more information.

Condition: new, Gas heated furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm Fpjdpecditnsfx Afnoc interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Condition: used, tank capacity: 1,800 l, GENERAL Design: rectangular Remarks: Double-chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); each chamber has a manway, diameter approx. 415 mm; each chamber has 1 outlet (1 x internal pipe diameter approx. 35 mm, 1 x internal pipe diameter approx. 38 mm); 2 welded reinforcements made of V2A in one of the chambers (see photos) Total width: 2,080 mm Total height: 1,500 mm Total length: 1,100 mm Location: Bremen Volume: 1,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: Food products TANK Mounting: Feet Number of feet: 4 pieces EQUIPMENT Manway / Dome: on the tank MATERIAL CHARACTERISTICS Outer surface: marbled Fpjdpfxeyck Tfj Afnjc Feet material: stainless steel

Condition: used, tank capacity: 3,000 l, GENERAL Design: rectangular Remarks: 2-chamber tank (1 x approx. 2000 liters, 1 x approx. 1000 liters); internal height approx. 1000 mm; opening chamber 1: approx. 1,260 x 1,330 mm, opening chamber 2: approx. 1,260 x 750 mm; side walls slightly curved outwards Total width: 2,430 mm Total height: 1,650 mm Total length: 1,650 mm Top: open Location: Bremen Volume: 3,000 liters Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Last application: water tank for agricultural use TANK Base: height-adjustable legs Number of legs: 4 Fjdpfx Aoyck Ngsfnspc EQUIPMENT Outlet: 50 mm MATERIAL CHARACTERISTICS Outer surface: marbled Legs material: stainless steel

Condition: used, tank capacity: 44,480 l, GENERAL Equipment: Lifting lugs Design: Vertical Remarks: Double-chamber storage tank divided into two 22,240 litre tanks; total height according to drawing, cylindrical height for each 22,240 litre tank according to drawing Internal diameter: 3,200 mm Total height: 7,380 mm Max. overpressure: 1.0 bar Location: 6250 Kundl, Austria Technical documentation: Drawings, various documents Nameplate: Vacuum: 0.25 bar Volume: 44,480 litres Cylinder wall thickness: 6 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,930 mm TANK Max. permissible operating temperature: 100°C Ends: Dished heads Support type: Legs Number of legs: 4 pcs EQUIPMENT Manhole / Access port: in the top head (DN 600) Outlet: Flange DN100 Fpedpfxoyci Uns Afnsc TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 10 mm Top head wall thickness: 6 mm

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW Fjdpfx Afewg Axvjnopc -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: used, This listing is for a EuroClone Optichrome evaporation chamber, Optichrome® is a controlled evaporation chamber with automatic control of temperature and humidity for optimized chromosome preparations Fodoxzh Ivopfx Afnepc

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences Fpjdpfxsu Ngk To Afnsc -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle -1x chucking groove centered accessories: Box with div. grinding wheels *

Condition: used, Year of construction: 1974, Technical details: Fpedpfswqplkex Afnsc total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: used, Cutting length: approx. 5,300 mm Fpjdpfx Ajxvcacefnec Longitudinal circular saw Irion type HFS-170/15-SA for precise longitudinal cuts in solid wood, panel materials, and wood composites.

Year of construction: 1995, condition: ready for operation (used), Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible. Fjdpfxsyit Hbs Afnjpc

Condition: new, Year of construction: 2024, Circular saws. • For cutting wood with nail residue • Available in various diameters. Fsdpoh Uubdjfx Afnepc For more information call us.

Condition: used, Costa multi-blade saw -Type Lince -max. cutting height 140mm -motor 30kW Fodpevw Rplofx Afnjpc

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm -max. passage width 1000mm -multi-blade saw with fixed saw attachment Fpsdpfx Afsvw Rnbsnec

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fsdpex Ux Ivsfx Afnepc Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.