Used Chair Manufacturing for sale (31,719)

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Rsdsw I T Ivepfx Aa Ujp Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: N32469, National double printing press M68, used, year 1974, Rsdswiuy Repfx Aa Uep

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,950 h, functionality: fully functional, overall weight: 916 kg, total length: 1,200 mm, total width: 1,100 mm, total height: 2,000 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 650 m³/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Atlas Copco Screw Compressor Rsdpfx Aox Dfmzsa Uop Model: FA55VSD+ Year of manufacture: 2020 Operating hours: 8,950 h Motor rated power: 55 kW Pressure: 4.0 to 13.0 bar Volume flow: 182.5 l/s or 10.9 m³/min Voltage/Frequency: 400 V / 50 Hz Dimensions (L/W/H): approx. 1,200 / 1,100 / 2,000 mm Weight: 900 kg The compressor is in excellent working condition and has been regularly inspected and maintained. It is currently still powered and can be viewed in operation. An associated air dryer and compressed air tank can be purchased optionally (see further listings).

Condition: new, Year of construction: 2026, Machine designation: Gantry Nailing Machine for Pallet Production Manufacturer: Stoiber GmbH Model: StoNail 3000 Redpfxsralk Rj Aa Ujp Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit, Austria Description: • Semi-automatic gantry nailing machine for producing various types of pallets and crate components. • For loading loose blocks and boards, either a flexibly adjustable clamping system or a wooden template wall is available to ensure minimal setup times. • Divided into two work zones, the operator alternates between working on the left and right sides of the machine. • The nailing bridge can be equipped with up to 8 nailing units using jumbo coil nails (approx. 8,000 nails). By simultaneously activating the nailers, this machine achieves very short production cycles and high output rates. • Operation and programming of new pallet types is performed via a touch display. Existing programs can be accessed from memory at any time. Manual teach-in of nail positions is not required! • NEW – Robot for pallet stacking Technical data: • Max. pallet size (standard): 2,500 x 1,700 mm per side • Max. pallet size (optional): 3,500 x 1,700 mm per side • Max. nail length: 90 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 - 600 pallets/8 h • Machine operators: 1 – 2 persons • Low operating and maintenance costs

Condition: new, Year of construction: 2026, Machine designation: Portal nailing machine for the pallet & packaging industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Designed for manufacturing various types of pallets and box components • Angled machine frame with wooden wall for templates • Divided into two work zones; the operator alternates between left and right operating sides • The nailing bridge is equipped with up to 6 individually controlled nailing units for jumbo coil nails (approx. 6,000 nails) • Machine operation and programming of new pallet types are performed via a touch display • Existing programs can be quickly retrieved from memory at any time • Entered parameters provide visualization of products on the touch display. No manual trial-and-error for programming nailing points! • NEW – Integrated pallet stacking robot! Technical Data: Redpfxsrallns Aa Ujp • Max. standard pallet size: 3,000 x 1,700 mm per side • Max. optional pallet size: 4,000 x 2,000 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets per 8 hours • Operators required: 1 – 2 persons • Low operating and maintenance costs

Condition: new, Year of construction: 2026, Machine designation: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 RT Redpfsrallrex Aa Uep Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Semi-automatic gantry nailing machine with rotary turntable (R) and pallet stacking robot for the production and stacking of various types of pallets and crate components. • The machine features a rotary turntable with two work zones for the placement of loose blocks and boards. In combination with the pallet stacking robot, this ensures optimal material flow. • The nailing bridge can be equipped with up to 6 individually controlled nailing systems for jumbo coil nails (approx. 6,000 nails), offering maximum flexibility for nailing your products. • Machine operation and programming of new pallet types are managed via a touch display. Saved programs can be recalled from memory at any time. The products and their parameters are visualized on the touch display—no manual movement required to teach the nailing points! • NEW – Robot for pallet stacking Technical Data: • Maximum pallet size: 3000 x 1700 mm per side • Maximum nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 - 600 pallets per 8 hrs • Machine operators: 1–2 persons • Low operating and maintenance costs

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Rsdpoxw Tumsfx Aa Usp Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Condition: new, functionality: fully functional, color: other, Year of construction: 2025, Equipment: cabin, hydraulics, The BS-20 concrete block machine is a fully automatic block production facility equipped with modern production technologies and a hydraulic system. Thanks to its PLC-controlled structure, it produces with high precision without the need for operator intervention. Operating at a pressure of 100-160 bar, the system has the capacity to produce 20 interlocks and 8 20x40x20 blocks per press. Furthermore, it minimizes labor requirements thanks to a collection robot that automatically stacks and packages dried products. The BS-20 offers an environmentally friendly production approach with its A+ energy-efficient motor system, EFF3 class electric motors, and low energy consumption. It meets European quality standards with its ISO 9001:2008 quality management system, CE certificate, and DIN-TSEK compliant structure. It provides a user-friendly experience with its automatic/manual switching system that increases operational flexibility, remote fault detection via the internet, and forklift-compatible design. BS-20 Concrete Block Machine Technical Specifications Production Capacity: 100–110 pallets per hour Pallet Size: 1,000 x 920 x 230 mm Rjdpfoxp Uwyox Aa Uop Control: PLC Automation System (Schneider) Bunker Capacity: 1.2 m³ Hydraulic Oil Capacity: 400 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Product Height (max): 3,000 mm Product Length (max): 600 mm Machine Chassis: 10 mm Production in 8 Hours: 8,000 blocks / 18,000 interlocks Why Should You Choose the Constmach BS-20 Concrete Block Making Machine? The BS-20 Concrete Block Machine offers high efficiency, low operating costs, and long-lasting use for medium-sized businesses. Manufactured with the assurance of CONSTMACH engineering, this system delivers uninterrupted production performance thanks to its automation capabilities and robust construction. With spare parts warranty, fast service network, and 24/7 technical support, CONSTMACH ensures your investment operates reliably for many years. Therefore, by choosing the BS-20 model, you can maximize both your production quality and operational efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), The Schenck TB Comfort is a horizontal hard-bearing balancing machine, designed for high-precision balancing of turbocharger rotors, in particular turbine wheels with shaft as well as compressor wheels. It covers a wide range of speeds and rotor sizes, with a maximum rotor power of 200 W and a maximum rotor diameter up to 350 mm. Rjdow N Rg Espfx Aa Usp

Condition: excellent (used), FRYMA MZM / VK - 50 Cream Manufacturing Plant This Plant with usable volume of 50 L is suitable for manufacturing creams, ointments and suppository masses etc and can also handle foamy products. Total volume: 73 litres Min. fill volume: 10 litres Homogeniser: Brienz RF 112 M - 2 - 4.0kW - max. 2,850 rpm Rsdpjuf A Rlsfx Aa Ujp Mixer - scraper: SEW FAF 37 - max. 28 rpm Manufacturer: Fryma Koruma Year of construction: 1998 Floor Space: 120 x 150 x 200 cm

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rjdjw U Ezzopfx Aa Usp Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Rodpevbd Ezofx Aa Uep Optional (up to 5 additional axes) - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Maximum feed speed: 121 m/min. Slide travel: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. If you have any further questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1980, max. pallet size 120 x 165 cm Rodpfx Aaexpi N Ro Uep 20 nail guides year of manufacture 1980, still in good condition

Condition: ready for operation (used), Year of construction: 1989, Pallet block saw LUDWIG incl. feeding of the blocks to the skid nailing machine Skid nailing machine with automatic feeding of the skids to the skid infeed Skid infeed incl. skid supply conveyor with skid turner and automatic separation, positioning and skid feed Assembly machine with U-template suitable for manual, semi-automatic or fully automatic feeding with automatic narrow / wide travel cycle time for nailing: start - nailing - nailing - nailing - template in starting position approx. 6 seconds Column stacker including various stacking programs, 90° or 180° stacking of pallets possible Rsdpfx Aouzhrpoa Uep All nailing machines with central lubrication

Condition: used, Year of construction: 1968, Hilgeland ME2 VM trimming press for sale. Rodpfjur N Ewjx Aa Uep

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Rodour N Dajpfx Aa Ujp Year of construction 1970 The machine is ready for immediate use!

Condition: used, Year of construction: 2010, x-travel 450 mm y-travel 400 mm z-travel 320 mm tool taper HSK 63 spindle turning speed range 0 - 10000 U/min rapid traverse 30 m/min control GE FANUC Series 16 i System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis Rodjtqqqmepfx Aa Ujp machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, travel paths module 3: X3 / Y3 / Z3 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø, (B-axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device

Condition: new, Elegant cantilever chair with a high-quality, brushed stainless steel frame and soft microfiber upholstery in warm brown. Very robust, suitable even for heavier individuals. A good combination of modern design and comfort. Listed price is for all (6 units). Total of 6 units. One is assembled (see photos); the other 5 are unassembled, allowing for compact and easy transport in a passenger car. Rjdpjxyqhisfx Aa Uep

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Pallet production line Suitable for the production of Euro pallets and special pallets. Consisting of: Kallfass block saw Block switch Buffer conveyor block Terwort NM1 nailing machine Cape deck nailing machine Mach 1 Deck storage Deck gripper Pallet storage 2x star turner Terwort NM 2 nailing machine Skid milling machine Stapler Corner saw Block burner Redpfx Aaeuhfq Hj Uop Elevator Rotating outfeed conveyor

Condition: new, Specification of the pallet sawing machine R-1200 T (model 2025) Basic technical data: Main engine: 7.5 kW Table width for sawing pallets: 1600 mm Table length: 1000 mm Diameter of the band saw blade guide wheels: 600 mm Saw blade: bimetal, length 6850 mm, suitable for cutting steel Functions and equipment: 1. System for lifting the saw head: Automatic lifting and lowering. Operation via hand and foot switches. 2. Hydraulic band feed: Stable and precise. Equipped with a pressure gauge for monitoring the operating parameters. Hydraulic accumulator for stabilizing the band saw blade. 3. Safety devices: Main protective grille preventing access to the exit area. Integrated conveyor belt for automatic removal of the cut elements. 4. Materials and technology: Heavy-duty bimetal saw blade, ideal for intensive use. Brand new machine, compliant with the latest occupational safety standards. Machine advantages: High efficiency thanks to the 7.5 kW motor and precise blade guide. Rjdpfovvxavox Aa Uop Fully automated control of the saw head for ergonomic work. Safe construction thanks to modern safety devices and the integrated conveyor belt. Versatility for recycling and processing wooden and steel pallets. Areas of application: Sawing pallets into individual parts for further processing. Recycling pallets and recovering raw materials. Production of wooden elements and metal components.

Year of construction: 2025, condition: new, Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm; suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films; suitable for dry nonwovens (airlaid, spunlaid); folds: max. 10 folds vertically and 4 folds horizontally; size of tissue, unfolded:L(40-220)xW(30-240)mm; Grammage wet wipe: 30-80g/m²; max. roll diameter: nonwoven: 1000mm, film: 350mm; filling range liquid: 0- 10ml; accuracy: +/- 0,5ml; max. speed of the machine in neutral: 110 single bags/minute (55 double bags); 5kW, 220V/380V; machine dimensions: L1000xW1500xH2000mm. Rodpfxev Nmaqe Aa Uep Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; lid dimensions: Width max. 80mm, length max. 120mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L16273xW5404xH2350 mm; total weight: about 12000kg; power: 27kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the packaging and lid closing unit on request. Rodpfxov Nma De Aa Ujp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or W shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(70-100)xW(40-100) mm; dimensions of unfolded tissue: L(140-200)xW(140-200) mm; number of wet wipes per pack (min. to max.): 5-30 pieces; grammage wet wipe: 35-80g/m²; speed of the machine in neutral: max. 900 wipes/minute or max. 90 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 280 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 280-400 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; power: 25kW, 380V; machine dimensions: L8500xW1520xH2350 mm; weight: 5000kg. Redpfxsv Nma Rs Aa Uep Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Redpfx Aev Nmawea Uep Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), overall weight: 200 kg, Year of construction: 2022, STEEL PRODUCTION TABLE TOPS, DIMENSIONS 1400X1200X15, CONDITION: GOOD. THE LISTED PRICE IS PER PIECE. AVAILABLE QUANTITY: 2750 PCS. Rsdpfex Ncdqsx Aa Uop