Used Chair Manufacturing for sale (32,857)

Condition: good (used), mileage: 197,891 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,950 mm, first registration: 06/2017, loading space length: 2,340 mm, loading space width: 2,200 mm, loading space height: 2,100 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 195/75R16, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, tail-lift, traction control, = Additional Options and Accessories = - Electric windows - None - Tail lift - Partition wall Prsdpfxsxpm Abs Ag Djd = Remarks = Configuration: 4x2, twin rear tires, payload: 730 kg, curb weight: 2,770 kg, gross weight: 3,500 kg, unbraked towing capacity: 750 kg, braked towing capacity on central axle: 2,630 kg, cab type: single cab, air conditioning, number of airbags: 1, parking assistance: none, electric windows, partition wall, radio/cassette, color: white, lighting type: halogen lamp, Bluetooth, engine power: 96 kW (129 HP), fuel type: diesel, Euro 6, drive technology: timing belt, gearbox type: manual transmission, gears: 6, power steering, ABS, ASR, starter battery, roof rack: none, rear closure: double rear doors, central locking, seats: 3, seating arrangement: 1+2, upholstery: fabric, seat adjustment: manual, tail lift, tail lift type: tailgate, tail lift capacity: 750 kg, tail lift manufacturer: DHOLANDIA, tail lift material: aluminum, tail lift size: 220x160, battery for loading ramp, tire type: summer tires = Further Information = Transmission Transmission: 6-speed, manual transmission Axle configuration Tire size: 195/75R16 Brakes: disc brakes Axle 1: Tire tread left: 10 mm; tire tread right: 9 mm; suspension: coil spring Axle 2: twin tires; inner left tire tread: 8 mm; outer left tire tread: 8 mm; inner right tire tread: 8 mm; outer right tire tread: 8 mm; suspension: leaf spring Dimensions Dimensions (L x W x H): 700 x 220 x 3310 cm Weights Curb weight: 2,770 kg Payload: 730 kg gross vehicle weight: 3,500 kg Functional Tail lift: DHOLANDIA, tailgate, 750 kg Height of loading area: 105 cm Maintenance APK (General Technical Inspection): valid until 09.2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration number: VPJ-98-J

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, mobility: stationary, 2022 Coima Complete Factory Dust Extraction & Biomass Burner System Unlock high-performance industrial dust extraction and biomass-combustion capabilities in one premium integrated system. This 2022 Coima Group unit offers an advanced combination of dust removal, filtration and renewable-fuel burner technology — ideal for manufacturing, woodworking, biomass energy, pelletising or large-scale processing environments. Key Specifications & Features: Manufacturer: Coima Group (Italy; suction, filtration & biomass systems) Model: FMNA150000100009 CE (15 kW dust extraction unit) Serial: IM_210459 / 076-22 Includes: galvanised ducting & flexible twin-wall connections – ready for integration into existing infrastructure. Hogger Unit Serial No: 077-22 – inclined galvanised feed auger & filter box provided. Biomass Burner: 2018 Keima Model K300E CE – Serial No 842018 – vertical cylindrical galvanised silo included. Briquette Former: Prodeco Model V-E70ECO EC – Internal metal ducting with serial No: 790 included. Complete turnkey package: dust extraction + biomass burner + feed systems + ductwork – full solution for wood-chip, pellet or briquette preparation and waste extraction. Why This System? Dual-Function Efficiency: Combine industrial dust extraction for woodworking or metal-processing with high-capacity biomass burner operations — one integrated system for manufacturing and energy recovery. Renewable Energy Compatible: As interest in biomass heat and circular-economy systems grows, this package is ideal for factories or units seeking to convert waste streams into energy-efficient boiler feed. Boiler Guide+1 Ready-to-Install Infrastructure: With galvanised ducting, twin-wall flexible connections, feed augers and silo included, installation time is markedly reduced — minimal additional civil works. Trusted Brand: Coima Group has specialised in suction, filtration and residue-handling systems since 1982. Mysite+1 Premium Condition: 2022 build, well-maintained, ideal for high-volume production environments requiring reliable performance. Technical Specifications Kiema K300E Power: 349KW/h Nominal power: 300KW/h Consumption (Ref. wood chips) : 185(Kg/h) Total weight: 3840kg Dimensions: 1455 x 4390 x 2240mm Air outlet diameter: 900mm Chimney diameter: 300mm Total pressure: 200Pa Maximum air flow: 20700m3/h Sound level: 96dB Maximum electric power: 7,5kW Electric voltage: 400V Electric frequency: 50Hz Combustion chamber depth: 1580mm Combustion chamber height: 150mm Combustion chamber width: 1115mm Combustion chamber volume: 1m3 Ideal For: Wood-working plants converting off-cuts or sawdust into briquettes Pelletising operations seeking integrated dust extraction + feed + burn capability Factories needing both dust/fume removal and biomass heat generation Renewable energy retrofits in industrial facilities or agricultural processing sites Additional Technical Info: 15 kW dust extraction capacity (FMNA150000100009) Inclined feed auger and filter box for automatic material transfer Vertical galvanised silo feeding the burner with finished briquette or chip material Twin-head twin-wall flexible connection ducting for ease of routing and compliant installation Serial numbers provided for full traceability. Podpfx Aextf H Hsg Dsrd Contact & Viewing: Viewing by Prior Appointment Only Notes Decommissioning/Dismantling & Loading Not Included in the Price

Condition: new, Year of construction: 2025, functionality: fully functional, power: 258.5 kW (351.46 HP), filling opening width: 2,000 mm, filling opening length: 7,000 mm, number of blades: 350, rotational speed (max.): 50 rpm, rotor diameter: 635 mm, rotor width: 2,000 mm, Genox J2000 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 240kW combined shaft motor power (75Kw + 3x55kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 50rpm shaft speed. Predpfx Agexwn E He Dsd Four 2,000mm wide x 635mm diameter rotors with 350 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture a 800mm & 1,200mm versions of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: B2007016, workpiece weight (max.): 1,400 kg, input frequency: 50 Hz, input current: 25 A, total width: 2,108 mm, total length: 5,165 mm, total height: 1,922 mm, Fully automated, Single Phase, assembly line for 3 Ply Nonwoven Surgical Face Masks Mask Size: 17.5 x 9.5 cm (adults) Output: 80 part/min Date of Manufacture: AUGUST 2020 Date of Installation: MAY 2021 Use start date: NOVEMBER 2021 Dates in use: Intermittently between FEBUARY 2022 - JUNE 2024 Supplier: UK Supplier (I2 Europe) Maintained: UK Supplier (I2 Europe) Sonic Welders: Sonotrode Titanium 40kHz (replaced original welders with these higher spec replacements in 2022) Ultrasonic frequency: 40 kHz Voltage: AC 220-240 V (50Hz/60Hz) Working Current: < 25 A Compressed air: 5-7 bar Total Power: 6k: W Podpfx Ajwftk Hjg Dsrd Output: 50,000 pieces per day (based on 10 hr day) Simple and safe operation Integrated intelligent operating system The manufacturing process includes: Feeding filter materials, folding & pressing, feeding of nose wire, forming of masks, cutting the masks, sonic welding of elastic earloops to masks, Has been set up and housed in ISO 6 certified Cleanroom in the UK which has ensured purity and cleanliness of all equipment. Total period in operation is circa 6 months.

Condition: used, Comprehensively tested and refurbished, Used Winkworth model RT200 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel Capacity: Approximately 200 Litre Capacity Mixing chamber: Approximately 1,000mm x 650mm Diameter Discharge Type: Centre Bottom with Discharge Valve Type Of Mixer: T-Arm Blades Motor: 11kW SEW Geared Motor Prjdpfx Agext Egts Ded Also includes: Stainless Steel Side Entry Chopper Driven by 4kW Motor. Tote lifter (Max 150 kg) and 2 off stainless steel totes. Click on the link below to see a video of the machine in operation. Specifications: Bowl Volume: 52.8 gal Motor Power: 14.8 hp Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 5.362 HP Of Unit: 14.751 Weight: 150 Dimensions: 1000mm x 650mm Diameter

Condition: used, This listing is for a CFS Protemist DT II Automated Protein Synthesizer Abnova presents a new generation, fully automated robotic desktop protein synthesizer, Protemist® DT II, for high throughput eykaryotic protein production. The system is developed and manufactured by CellFree Sciences Co., Ltd. It synthesizes the protein of interest using a special wheat germ lysate and a bi-layer reaction. Protemist® DT II can run two scales of translational reaction, 1.2 ml (24 well) or 6 ml (6 well). Batch affinity purification is available for affinity tagged fusion protein synthesized in 6-ml (6 well) reaction scale. This is an expert system in transcription, translation, and purification. The protocol and automation is designed for easy operation obviating the need for manual handling and production. Specifications Dimensions: 79cm(h) x 50cm(d) x 70cm(w) Weight: 100 kg Power: 100~240 V 50/60 Hz Voltage Fluctuation Tolerance: ±10% Power Consumption: 350 VA Max. Number of Samples Per Run: 6 samples: transcription, translation and affinity purification (6 ml/sample) 24 samples: transcription, translation (1.2 ml/sample) Processing Volumes: 100 ul to 800 ul Reagent Unit: Temperature Control Method: Peltier moduleTemperature Setting: 4°C (Fixed) Dispensing Volume Variation: Within ±5%, CV < 1% (in dispensing 100 µl distilled water) Ambience for Installation: 15~30°C, humidity < 75%, dew condensation to be avoided Pjdpfoxzh Ucsx Ag Djrd

Condition: excellent (used), Year of construction: 2021, operating hours: 537 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 650 mm, travel distance Z-axis: 200 mm, total height: 2,215 mm, total length: 2,820 mm, total width: 1,700 mm, wire diameter (max.): 0.2 mm, workpiece height (max.): 510 mm, workpiece width (max.): 510 mm, workpiece length (max.): 510 mm, type of input current: three-phase, overall weight: 3,220 kg, empty load weight: 3,320 kg, feed length X-axis: 650 mm, feed length Z-axis: 200 mm, feed rate X-axis: 240 m/min, feed rate Z-axis: 240 m/min, table load: 500 kg, input voltage: 400 V, working range: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, tank capacity: 930 l, cutting speed: 240 mm/min, travel speed (max.): 240 mm/min, input frequency: 50 Hz, input current: 11 A, Equipment: documentation/manual, 2021 Agie Charmilles CUT AM 500 Wire EDM Machine Discover premium Swiss precision with this 2021 Agie Charmilles CUT AM 500 CNC Wire EDM Machine This high-performance wire EDM machine has only 537 erosion hours and comes from a medical device manufacturing environment, ensuring meticulous maintenance and minimal wear. Ideal for high-precision applications in medical, aerospace, automotive, and mold-making industries. Machine Overview Make/Model: Agie Charmilles CUT AM 500 Machine Type: CNC Wire EDM Machine Year: 2021 Prjdsxtfwxopfx Ag Djd Control System: GF Control Erosion Hours: 537 hrs Condition: Very Good – ready for immediate operation Technical Specifications Work Area Max. part dimensions: 510 x 510 x 510 mm Max. part weight (base + parts): 500 kg Dielectric level (min/max): 250–305 mm Performance Max. machining speed: 240 mm²/min Surface roughness (Ra):

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. Prsdexwnwijpfx Ag Dsd All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Predexzg N Ejpfx Ag Dsd Good working and cosmetic condition. The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, double-sided, rotational speed infinitely variable, type plate available, 2008 ACME Robotic Polishing Cell with Fanuc M-710i Robot – Fully Automated Metal Finishing Solution Looking for a high-performance robotic metal polishing system? Don’t miss this 2008 ACME Manufacturing Co. Robotic Polishing Cell, engineered for precision, consistency, and automation. Ideal for metal finishing, surface treatment, automotive, aerospace, or industrial manufacturing. 🔧 Manufacturer: ACME Manufacturing Co. 🚨 Machine Type: Robotic Polishing Cell 📅 Year of Manufacture: 2008 🤖 Robot Model: Fanuc M-710i 📍 Location: Ireland 📦 Condition: Good – fully operational and maintained 🟢 Availability: Immediate ✅ Machine Overview: This 2008 ACME robotic metal polishing cell is a fully automated surface finishing system equipped with a Fanuc M-710i 6-axis robot and designed for precision metal polishing in high-volume environments. Ideal for manufacturers in medical device, automotive, aerospace, general engineering, or stainless steel finishing sectors. 💡 System Includes: ✅ Fanuc M-710i Industrial Robot – Reliable 6-axis automation for complex polishing paths ✅ Two Twin-Head Polishing Stations – Simultaneous dual-surface processing ✅ Automatic Polishing Paste Delivery Units – Supports both fine and coarse pastes for optimal finish ✅ Vibration Monitoring Point – Ensures consistent surface quality and machine health 📈 Benefits: Increased throughput and reduced labor costs Repeatable, uniform polishing quality Fully automated and programmable – minimal operator input Compact, integrated cell for efficient floor space use Podpfxextftye Ag Dord Core Functionality Material Removal: The robotic system employs abrasive belts or wheels to remove material from workpieces, effectively smoothing edges, removing imperfections like flash, and achieving specific surface finishes. Precision and Repeatability: Unlike manual polishing, which can vary from part to part, robotic systems ensure consistent and repeatable results, crucial for high-precision applications. Versatility: ACME cells can be adapted for a wide range of materials and part geometries, including orthopedic implants, automotive components, and more. Integrated Automation: These cells often feature part handling systems, like conveyors and dual-drawer arrangements, to enable continuous and unattended operation. Dust and Sound Containment: Built-in enclosures help confine dust and noise generated during the process, improving safety and environmental conditions. Key Features and Benefits Increased Production Rates: Robotic polishing can significantly increase the number of parts processed per hour compared to manual methods. Reduced Costs: By automating the process, companies can reduce abrasive media costs, labor costs, and potentially decrease scrap rates. Improved Safety: Robotic systems eliminate the need for operators to manually handle potentially hazardous materials and tools. Enhanced Consistency: Robots deliver consistent, repeatable results, ensuring uniform quality across all parts. Process Optimization: ACME cells allow for programmable belt speeds and other parameters, enabling optimization for different materials and finishes.

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Prsdpfxsxwnwcs Ag Dod Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2022, condition: refurbished (used), This listing is for a refurbished Laboklav 80M Eco Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 80l Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 915 x 600 Chamber dimensions (Ø x d in mm) 400 x 610 Directly heated (heating elements) Fast re-cooling by air 1N 230V 50Hz 16A, connection to tap water and drain recommened (use of condensate collector possible) Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality Pedpfx Agjxzg Inj Djrd

Condition: excellent (used), Year of construction: 2018, operating hours: 3,590 h, functionality: fully functional, spindle motor power: 15,000 W, turning length: 100 mm, turning diameter over cross slide: 51 mm, spindle speed (max.): 5,000 rpm, turning diameter: 51 mm, spindle bore: 51 mm, overall weight: 5,300 kg, rotational speed (max.): 5,000 rpm, type of input current: three-phase, bar passage: 51 mm, feed length X-axis: 165 mm, feed length Y-axis: 80 mm, feed length Z-axis: 590 mm, total width: 1,560 mm, total length: 2,840 mm, total height: 1,700 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 20 m/min, bar diameter (max.): 51 mm, turning diameter over bed slide: 51 mm, turning diameter over top slide: 51 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, input voltage: 400 V, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 590 mm, power of the servo motor: 15,000 W, Equipment: documentation/manual, rotational speed infinitely variable, 2018 Citizen Miyano BNJ-51 CNC Automatic Lathe – Excellent Condition & Low Hours 2018 Citizen Miyano BNJ-51 Fixed Headstock CNC Automatic Lathe, complete with Iemca Kid 80 Barfeed and full tooling package. This high-precision twin-spindle lathe has only 3,590 cutting hours and comes from a clean, well-maintained production environment. Perfect for precision component manufacturing in medical, aerospace, and automotive industries. Machine Overview Make/Model: Citizen Miyano BNJ-51 Machine Type: Fixed Headstock Type CNC Automatic Lathe Year: 2018 Control System: Fanuc Series Oi-TF Predpfjxtfqrsx Ag Dsd Cutting Hours: 3,590 hrs Condition: Excellent – low hours, production-ready Included Equipment & Features Iemca Kid 80 Barfeed Parts Conveyor Swarf Conveyor Parts Catcher Mirror Turning Capability Collet Chuck on Spindle 1 Collet Chuck on Spindle 2 6” 3-Jaw Hydraulic Chuck 8 x Driven Toolholders Full Set of Static Toolholders Technical Specifications Machining Capacities Max. Machining Length: 100 mm Standard Turning Diameter (Spindle 1): 51 mm Standard Turning Diameter (Spindle 2): 42 mm Chuck Size Spindle 1: 6" Chuck Size Spindle 2: 5" Number of Spindles: 2 Spindle Performance Spindle 1 Speed Range: 5,000 rpm Spindle 2 Speed Range: 5,000 rpm Draw Tube ID (Spindle 1): 52 mm Draw Tube ID (Spindle 2): 43 mm Spindle 1 Drive Motor: 15 kW Spindle 2 Drive Motor: 7.5 kW Turrets & Tooling Number of Turrets: 2 Turret 1: 12-Station (Driven Tool Capable) Turret 2: 8-Station (Driven Tool Capable) Square Tool Shank: 20 mm Drill Shank Diameter: 25 mm Driven Tool Speed – Turret 1: 6,000 rpm Driven Tool Speed – Turret 2: 3,000 rpm Driven Tool Motor (T1): 2.2 kW Driven Tool Motor (T2): 0.75 kW Axis Travels X1 Travel: 165 mm Z1 Travel: 246 mm Y1 Travel: 80 mm (+/- 40 mm) X2 Travel: 85 mm Z2 Travel: 590 mm Rapid Feeds (X1, Z1, X2, Z2): 20 m/min Rapid Feeds (Y1): 12 m/min Power & Electrical Power Capacity: 33 kVA Machine Dimensions (W x D x H): 2840 x 1560 x 1700 mm Machine Weight: 5,300 kg Highlights Low Cutting Hours: Only 3,590 hrs of light use Full Barfeed & Chip Handling Package – ready for continuous production Twin Spindle / Twin Turret Configuration for maximum productivity Driven Tooling for milling, drilling, and complex part geometry Fanuc Oi-TF Control – industry standard reliability and precision Ideal for precision turned parts in small to medium batch runs Applications This machine is ideal for medical components, automotive fittings, aerospace connectors, hydraulic parts, and general precision turned parts. The combination of twin turrets, high-speed spindles, and driven tooling allows for efficient multi-axis machining with minimal setup time and high repeat accuracy. Condition & Availability The Citizen Miyano BNJ-51 is in excellent mechanical and cosmetic condition and available for immediate inspection or delivery. Citizen Miyano BNJ-51, Used Citizen CNC Lathe, Used Miyano Lathe Ireland, CNC Automatic Lathe for Sale, Citizen BNJ Lathe, Twin Spindle CNC Turning Center, Used CNC Machines Ireland, Fanuc CNC Lathe, Barfeed CNC Lathe, Used Precision Lathes, Citizen Miyano BNJ Series, CNC Turning Machines for Sale Europe, Fixed Headstock CNC Lathe

Condition: new, Year of construction: 2025, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Prsdpfsxwnv Sox Ag Dsd Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, This listing is for 1 of 6 Capricorn CEP2000 Centrifuge Capricorn Labs manufacture the CEP 2000 Bench Top Centrifuges and offers full maintenance and servicing support for their CEP Series of Bench Top Centrifuges have been designed specifically for use in clinical trials and are well established as reliable machines, which require very little maintenance. They have been developed to give high performance in a compact unit with simple, easy to use controls. Psdpfxexzg Alo Ag Dsrd

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with a choice of either a 6 knife, 3 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Predpfx Agjxwnvxo Dod An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, This listing is for a Medite A550 Rotary Microtome Developed and manufactured by experts in Germany The fully automatic Microtome A550 is the premium model for use in histology and histopathology as well as in research laboratories and in industrial quality assurance. With this microtome version, both the horizontal feed and retraction and the vertical cutting stroke are motorized. This means physical relief for the user during intensive, long-term use. Alternatively, the cutting stroke can also be carried out manually using the smooth-running handwheel, if, for example, sensitive cuts are necessary for very fragile tissue samples. The handwheel can easily be locked in any position using a spring lever. The proven, high-precision microtome mechanism is developed and produced in Germany and ensures maximum sectioning quality for continuously high sample throughput. Psdpfx Agoxzgv Ej Derd The Microtome A550 impresses with its high functionality and attractive design that are focused on optimal ease of use. Settings relevant to the sections are entered via the intuitively operated membrane keyboard with digital display. The background color is freely selectable. The upper rotary push button on the left is used to switch between fine and coarse adjustment and to scroll through the menu. With the middle, larger rotary push button, the specimen clamp is simply moved back and forth. This can also be done using the keyboard. The sectioning speed can be set with the lower rotary push button and two different speeds can be selected for trimming and fine sectioning.

Year of construction: 2025, operating hours: 5 h, condition: new, functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. Pjdsxwnvlspfx Ag Derd 800mm wide x 420mm diameter cutting chamber with heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. This machine is in stock at our warehouse in the UK.

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Prsdpoxwnu Usfx Ag Ded Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. Prsdpfx Aexwnu Ieg Dsd 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. Psdjxwnrgspfx Ag Dord We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 5,150 mm, total width: 2,210 mm, total height: 2,600 mm, overall weight: 11,400 kg, warranty duration: 12 months, hopper volume: 2,000 l, rotor diameter: 515 mm, rotational speed (max.): 15 rpm, rotational speed (min.): 5 rpm, blade width: 50 mm, power: 90 kW (122.37 HP), rotor width: 1,600 mm, Genox X1600 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. Pjdpfxoxwnl Tj Ag Dord The machine is equipped with twin 45kW (90kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 7,000 mm, total width: 3,050 mm, total height: 4,000 mm, overall weight: 32,450 kg, warranty duration: 12 months, hopper volume: 4,000 l, rotor diameter: 750 mm, rotational speed (max.): 12 rpm, rotational speed (min.): 5 rpm, blade width: 75 mm, power: 150 kW (203.94 HP), rotor width: 1,800 mm, Genox X1800 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 75kW (150kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option. Podpfsxwnlmsx Ag Djrd

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,600 mm, total width: 1,225 mm, total height: 1,850 mm, overall weight: 1,470 kg, warranty duration: 12 months, hopper volume: 550 l, rotor diameter: 276 mm, rotational speed (max.): 13 rpm, blade width: 20 mm, power: 7.5 kW (10.20 HP), rotor width: 400 mm, Genox M400 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with a 7.5kW drive motor and oversized, heavy duty reduction gearbox providing high torque, low speed operation. Psdpfx Asxwnlgeg Dord Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,710 mm, total width: 1,270 mm, total height: 1,850 mm, overall weight: 2,300 kg, warranty duration: 12 months, hopper volume: 750 l, rotor diameter: 276 mm, rotational speed (max.): 14 rpm, blade width: 20 mm, power: 15 kW (20.39 HP), rotor width: 800 mm, Genox M800 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 7.5kW (15kW Total Power) drive motors and oversized, heavy duty reduction gearboxes providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Prjdpfxexwnkvo Ag Djd Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.