Used Centrifugal Pump for sale (9,497)

Year of construction: 2015, condition: excellent (used), coolant capacity 10 m3l/h Headroom 18 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor type 80 L Itodpoub Ur Tjfx Akpen motor speed 2900 U/min engine output 1,1 kW weight 33 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884

Condition: good (used), KSB Etaline GN G10 Pump Inline pumps and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q 17.50 m3/h H 5.8 m Please refer to the data sheet for further information on this pump. 1) The sum of the inlet pressure and the delivery head at zero flow rate must not exceed the specified value. Design Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/pressure nozzle: 160 Itodpfod Sqkzsx Akpjn Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB Etaline GN G10 pump

Condition: good (used), KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Ijdpfx Aksq Tqnqopetn Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Protection class: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our store! International shipping costs on request!

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Iodpfoizq Rqsx Akpstn Engine power: 4,8 KW

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Itjdpsizq Rxofx Akpsn Engine power: 4,8 KW

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Itedjizq R Repfx Akpjn Engine power: 4,8 KW

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Iodpfxsizq Scs Akpotn Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Itsdpfoizq N Tjx Akpen Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW Itjdpfxsizq R Ao Akpjn

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Itsdpfx Aoizq R Uekpen Engine power: 4,8 KW

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW Iedeizq N Nepfx Akpstn

Year of construction: 2006, condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Ijdpfeizq Risx Akpetn Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW

Year of construction: 2006, condition: new, System: centrifugal pump in PP Iedeizq Rmjpfx Akpotn Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW

Year of construction: 2006, condition: new, System: centrifugal pump in PP Iedoizq R Hspfx Akpstn Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW

Condition: excellent (used), Packo PHP 2 Pharma Process Pump The Packo EHEDG and 3A-certified pharma process pumps of the PHP2 series are used for the most demanding sterile applications in the pharmaceutical, biotechnology, and semiconductor industries. These perfectly cleanable pumps feature pump housings made of thick, cold-rolled stainless steel 316L, which are 100% pore-free and extremely smooth. The pumps have fully machined, open impellers made of material 1.4435. Thanks to their gap-free design and final electropolishing, the PHP2 series pumps are perfectly cleanable and therefore a reliable component in your production process. Areas of application: These perfectly cleanable process pumps are the ideal solution for purified water circuits, cleaning applications, etc. Typical fluids include purified water, WFI, CIP, syrups, etc. Iedpfew Hc Hmjx Akpotn Your benefits: High pump efficiency leads to lower energy consumption Low NPSH values: reduced risk of cavitation Electropolished: perfectly cleanable Simple design and maintenance: less downtime Standard components Fully certified (roughness value, FDA, USP, 3.1 for parts in contact with the medium, certificate of conformity, etc.) Suitable for SIP Robust design according to ASME BPE guidelines Parts in contact with the medium < 0.4 µm Manufacturer: Packo Type: PHP 2/40-1857752 Q: 14 m³/h H: 59 m Weight: 91 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: DN50 flanges Isdpfx Astp A Shekpstn 345mm between flanges Q = 35.1m3/h H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2004, Centrifugal pump, pump, KSB Etanorm mx 125-250 NA, Used machine Overall dimensions :1690 x 780 x 1000 mm Weight: 1000 kg Manufacturer:KSB Type:Etanorm mx 125-250 NA Year of manufacture: 2004 Electrical data: 400 V; 50 HZ; 2980 rpm; 110 kw; 190 A Lifting height: 75,5 m Pump capacity: 5920 L/min Iedpfx Akeuhl R Hjpstn

Condition: new, Year of construction: 2025, Cryogenic centrifugal pump unit CRYOBASE CPD 160, year 2025 For sale is a like‑new cryogenic centrifugal pump unit CRYOBASE model CPD 160 with horizontal electric drive motor for liquid nitrogen / oxygen / air (LIN / LOX / LAR). The pump has never been in service, was stored dry, and only mounted for test fitting; all original nameplates and safety stickers are in place. Key technical data Type: centrifugal pump CPD 160 for cryogenic liquid gases Flow rate: approx. 300 l/min Differential pressure / head: 22 bar / 160 m Motor speed: 6,750 rpm Motor power: 22 kW, IE3 efficiency Ijdpfxjznv Azo Akpetn Fluid: LIN / LOX / LAR, temperature down to about −176 °C Design: horizontal execution, axial suction flange, side discharge flange Required NPSH: 0.5 m This unit is perfect for industrial gas plants, storage and distribution systems, or upgrading existing cryogenic tank stations. Machine location: Cologne, Germany; inspection by appointment, worldwide shipping on request.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. Itjdjfyn Rpjpfx Akpsn ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Condition: good (used), Fristam FPX712-130 Sanitary centrifugal pump Sanitary centrifugal pump for food, dairy and beverage processing, see plates for spec, 2 in stock Ijdpfx Akox R U Nnspetn

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Power isolator switch 1.5 kw 5.7 m3/hr H max 60m Itsdez E Nhvjpfx Akpen

Condition: used, overall weight: 80 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cooling capacity: 5.5 kW (7.48 HP), immersion depth: 460 mm, Equipment: type plate available, Spandau Pump, SKF Lubrication Systems Germany GmbH Submersible centrifugal pump, submersible pump, coolant submersible pump, centrifugal pump unit, immersion pump TYPE PSL0303GBS460N05BA Immersion depth: 460 mm, 400 V, 50 Hz Itedpfx Akow Rvhdepjn Delta connection 5.5 kW IE2 Tmax 80°C Qmax 1200 l/min, Hmax 49 m Weight 80 kg The coolant pump is used and was mounted on a filter system. The nameplate on the centrifugal pump states "Made in Germany." Price negotiable Our asking price is €1,880.00 net ex works, plus packaging costs. All technical specifications are subject to typographical errors and inaccuracies. We only sell to countries within the European Community.

Condition: good (used), Wilo ILE80-190 Glanded centrifugal pump Glanded centrifugal pump, with built in frequency converter for electronic control for constant or variable pressure, 21Kw, two in stock Itsdpfxjw Dylhj Akpjn

Condition: good (used), KSB Etaline GN G11 centrifugal pump Inline centrifugal pump and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q up to, see data sheet H up to, see data sheet The data for this pump can be found in the data sheet. 1) The sum of the inlet pressure and the head at the zero flow point must not exceed the stated value. Itsdpfeiu U Txsx Akpjn Design Block pump in inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 80 Nominal size suction/discharge nozzle 210 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN G11

Condition: used, Used Flowserve type 600LNN975 centrifugal pump. Unit is rated 4,250 m3/hr at 33.5m head, 595 rpm. Unit rated 16 bar maximum pressure at -15 to 25 deg.c. temperature. Casing is carbon steel (A216 Gr. WCB), shaft is carbon steel (EN10083-C35E) and impeller is austenitic stainless steel casting alloy(A743 Gr. CF-8M). Unit driven by ABB electric motor rated 1000kW, 593rpm. Unit is mounted on mild steel frame. Itjdpozbuggsfx Akpsn Additional information available upon request.