Used Centering Microscope for sale (14,446)

Condition: excellent (used), Year of construction: 2004, operating hours: 22,146 h, functionality: fully functional, machine/vehicle number: 107.44.00.035, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 300 mm, workpiece width (max.): 140 mm, total height: 2,900 mm, total length: 3,500 mm, total width: 2,400 mm, table load: 500 kg, rotary table diameter: 600 mm, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 4,192 h, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Here is a CNC vertical 5-axis machining center from the manufacturer Mikron for sale. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 800 Duro Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical data: Travel distances X-Y-Z: 800x650x500 mm Max. rapid traverse rate: 30 m/min Max. feed force X- and Y-axis: 7000 N Max. feed force Z-axis: 9000 N Rotary table C-axis: 360° Rotational speed: 20 rpm at 30% duty cycle, 8 rpm at 100% duty cycle Swivel range A-axis: -30° to +120° Swivel speed: 15 rpm at 30% duty cycle Table area: 600x600 mm Max. table load: 500 kg Magazine capacity: 30 positions, fixed Tool holder: HSK-63 Max. tool length: 300 mm without taper Max. tool weight: 8 kg Tool diameter: 90 mm fully loaded / 140 mm partially loaded Spindle speed: 20,000 rpm Power: 16 kW at 44% duty cycle, 12 kW at 100% duty cycle New spindle installed in 2021. Since then, 4,192 spindle hours. Operating hours (program runtime): 22,146 h Machine dimensions: 3500x2400x2900 mm Weight: 9,900 kg Bedpfs Afy Ilox Afmslp Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Renishaw measuring probe OMP60

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49149, operating hours of spindle: 39,072 h, number of slots in tool magazine: 280, Equipment: chip conveyor, For sale is an extremely robust and reliable horizontal 4-axis machining center, Heller MCH 250, manufactured in 2008. The machine is designed for high-precision heavy-duty machining and is in operational condition. Equipment: - Horizontal spindle - 2-position pallet changer - Rotary table - Additional 4-position rotating pallet changer (Keppeler, SN: M4.4914900) - Siemens 840D control Bodpfe Afxw Hox Afmjlp - 280-position tool changer - Chip conveyor Knoll 330S-1/150 - Coolant/lubricant treatment system with band filter, Siemens Simatic control - Cooling unit BKW Accessories: - Workbench (4 drawers, 1 door) - Swivel chair - Shelf - PC, mouse, keyboard, monitors Attractive offer – flexible and worry-free We offer not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together, we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2011, Horizontal machining center Burkhardt + Weber Type/Model: MCX 900 Condition: Used Year of manufacture: 2011 Operating hours: 27,289 h Control system: Siemens 840D Technical data Working area and workpiece capacity Travel ranges X / Y / Z: 1,650 mm / 1,600 mm / 1,500 mm Interference circle: 1,850 mm across the entire X travel range Pallet size: 1,000 x 800 mm Max. pallet load: 3,000 kg Tilting moment for pallet machining up to 40,000 Nm Pallet design: T-slots Main spindle Tool holder: SK 50 Gear unit: 2-stage Spindle speed up to 8,000 rpm Spindle power: 37 kW (S1) Spindle torque: 1,220 Nm (S1) Tool management Magazine with over 200 tool positions Max. tool weight: 40 kg Tool tilting moment up to 120 Nm Tool taper cleaning Tool loading via the spindle Tool planning system on the spindle Mechanical drill break detection up to 750 mm Coolant system Coolant tank volume: 2,500 liters Paper band filter High-pressure coolant system: 70 bar Bodpfo Afpnijx Afmolp Adjustable coolant pressure Cooling unit Flushing of pallet support Workpiece flushing Coolant spray gun Automation and hydraulics Linked to a robot cell Year of manufacture of the robot cell: 2013 Fixture hydraulics Hydraulic connection on the pallet changer Hydraulic connection in the working area Hydraulic connection to the pallets Hydraulic extension for clamping pressures over 60 bar Equipment: Process monitor iCut Collision monitoring system Brankamp CMS UPS 4-way light stack Quoted item: Shipping costs will be provided in a separate offer.

Condition: used, Year of construction: 2011, operating hours: 69,103 h, functionality: fully functional, machine/vehicle number: NT430111102, travel distance X-axis: 750 mm, travel distance Z-axis: 1,635 mm, overall weight: 26,500 kg, For sale is a CNC turning and milling center from the renowned manufacturer Mori Seiki, type NT4300DCG/15000S, manufactured in 2011. The machine features a dual spindle, a milling spindle, and extensive technical equipment, making it suitable for demanding turning and milling operations. Technical specifications: Manufacturer: Mori Seiki Type: NT4300DCG/15000S Year of manufacture: 2011 Serial number: NT430111102 Machine number: 1216 Travel distances X/Z: 750 / 1,635 mm Max. turning diameter: 750 mm Electrical connection power: 69 kVA Machine weight: approx. 26,500 kg Control system: Type F31IA5 Equipment and accessories: Dual spindle Milling spindle 10-position tool turret, partially with driven tools Three- and four-jaw chucks Bsdpfx Ae Afx Alofmjlp Internal tool measuring system Renishaw HPRA Chip conveyor, manufacturer Enomoto Coolant filtration system with band filter, manufacturer Knoll, type FKA500, year of manufacture 2012 Separate cooling unit, type CLPB, serial number 159145 Siemens control system, type Simatic Two workbenches with 10 and 12 drawers respectively Partition and lighting system Extensive accessories with digital and analog measuring instruments, hand tools, and machine accessories Sales offer: A powerful CNC machining solution with extensive equipment for industrial production. The machine is offered including the described accessories. Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Feel free to contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the reputable manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in the year 2000. This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype construction. The machine is in operational condition and impresses with the combination of large travel ranges, an NC swivel rotary table, and stable machine kinematics. Equipment: - Rotary table - mounted special clamping device - 2 precision vises - viewing window - Heidenhain TNC426 control unit - 60-position tool changer SK40 - chip conveyor - separate coolant system with band filter Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. Bledj Afphiopfx Afmop We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center Bedpfx Aj Afulmefmslp - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 1,440 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,800 h, coolant supply: 40 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Machine with a wide range of accessories. Vise and holder included. Bledpo Afzdasfx Afmep

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" Bsdpfxjzqggvj Afmslp MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: good (used), Control system: Siemens 840 D Turning diameter: 290 mm Turning length: 850 mm Distance between centers: 600 mm Bljdpfx As Afacdjfmop Spindle bore: 103 mm Spindle speed: 3,000 rpm Driven tool speed: 3,000 rpm Chip conveyor Weight: 11,000 kg

Condition: good (used), Year of construction: 1998, - Heidenhain CNC Pilot control system - Accessories included - Powered tooling - Counter spindle Work area Max. turning diameter 160 mm Swinging diameter over bed 440 mm Swinging diameter over compound slide 210 mm Turning length 350 mm Main spindle Spindle bore 56 mm Max. spindle speed 5,000 rpm Drive power 7.5 kW Number of spindles: Main spindle C-axis Travel distances X-axis 160 mm Z-axis 350 mm Bodpj Afhifofx Afmjlp Tailstock travel 350 mm Tailstock Arbor diameter 80 mm Tailstock travel 350 mm Tailstock mounting MK 3 Feeds Rapid traverse X 20 m/min Rapid traverse Z 30 m/min Space requirement approx. 2,800 x 1,800 x 1,800 mm Machine weight approx. 3,400 kg

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW Bjdpfx Aogydn Iefmolp

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Bljdpevvi N Iefx Afmop

Condition: used, Year of construction: 1995, Storage location: Nattheim Blsdpfx Aewkirqefmjp

Condition: used, Year of construction: 1994, Storage location: Nattheim Bjdpfjwmm Nrjx Afmjlp

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Bledpozvhkysfx Afmjp

Condition: excellent (used), Year of construction: 2022, operating hours: 4,000 h, functionality: fully functional, turning length: 900 mm, turning diameter: 500 mm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 900 mm, rotational speed (max.): 2,800 rpm, overall weight: 8,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC turning-milling center SPINNER TC 800 - 110 SMCY with main and counter spindle and Y-axis Year of manufacture: 2022 Control system: Fanuc 31i Technical data: Main spindle speed: 0 - 2,800 rpm Drive power: Main spindle torque: Counter spindle speed: 0 - 4,000 rpm Drive power: Counter spindle torque: Number of stations, turret: 12 Number of driven stations: 12 Tool holder: VDI 30 Travel distances: X-axis: 360 mm Y-axis: +65 / -55 mm Z-axis: 950 mm Bleds Agfyzjpfx Afmep Accessories: - Short bar loader - High-pressure system 12 bar - Chip conveyor

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, total length: 11,850 mm, total height: 4,016 mm, input voltage: 400 V, total width: 3,250 mm, Equipment: documentation/manual, For sale immediately, highest bid wins! The machine can be inspected while in operation. Included are a spare spindle worth €10,000.00 and a computer with software worth €3,000.00. Bjdozvattepfx Afmolp

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: TNC430, overall weight: 6,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 32, Rapid traverse rate X/Y/Z: 50 m/min Tool holder: SK 40 Table: max. load approx. 200 kg Coolant system Bledpfe Agm Tbox Afmop Chip conveyor Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport and proper installation – all from a single source. Billing based on individual terms and conditions and duration. Contact us for your personal offer.

Condition: used, Year of construction: 2009, This DECKEL vertical CNC machining center, type: Maho DMC 635 V, will be auctioned off in our industrial auction / machine auction, which includes liquidation of industrial machinery – injection molding machines, CNC machining centers, universal lathes, and more – online. Blede Agku Hepfx Afmep You can find this and many other items on our platform.

Condition: used, Year of construction: 2007, -no machining tool required -spindle replaced in 2018 -NUM control system replaced in 2019 -machining dimension X: 5500 mm -machining dimension Y: drilling 1440 mm / milling 1780 mm -safety device: bumpers / safety guards -automatic central lubrication via CNC control -central extraction system -rear tool magazine HSK 63 with 24 positions Blsdpjz Ehvrjfx Afmop -chip conveyor -TV-Morbidelli table with 10 supports, L=1500mm -vacuum cups, approx. 15 pcs, X=145/Y=145/H=50 mm + approx. 8 pcs, X=145/Y=55/H=50 mm -positioning aids on Morbidelli table -vacuum cup positioning via laser -vacuum pump 250 CBM/H -drilling head speed adjustable via machine inverter -CNC control with PC Office -prepared for remote service -drilling unit with 30 spindles and 4+2 horizontal spindles -base for vacuum cup mounting on support rail Storage location: Nattheim

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Bjdsz Ebzhspfx Afmelp Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: new, power: 40 kW (54.38 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, workpiece weight (max.): 10,000 kg, number of slots in tool magazine: 60, controller manufacturer: HEIDENHAIN, Equipment: CE marking, The LAGUN TM 3 is a highly stable, T-frame milling center with a large rotary table and a large working area diameter. It offers maximum flexibility and is ideally suited for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical features: Control: ✔ HEIDENHAIN TNC 7 digital control ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: 2 x hinged belt conveyors (front and rear) Bedpfxshy Aunj Afmelp Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us, we will be happy to advise you and prepare a customized offer.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 450 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 495 mm, workpiece weight (max.): 200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, controller model: TNC 640, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotary table diameter: 320 mm, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 5AX 320 5-axis simultaneous machining center with a cross table design represents the highest level of precision, robust construction, and economical production. It is ideal for mechanical engineering, mold making, and contract manufacturing, as well as for demanding and complex machining tasks. Your benefits: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany Bodpoh Ekqysfx Afmelp ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical features: Control system: • HEIDENHAIN TNC 7 digital control • HEIDENHAIN 19" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Includes the following accessories: ✔ Longitudinal articulated belt chip conveyor ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare an individual offer.

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 Blodpfx Afjx Twd Hemsp 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty Bledpj Af Ultofx Afmjp • Short delivery time, subject to prior sale