Used Carriage for sale (1,766)

Condition: good (used), Year of construction: 1970, not tiltable, Kdjdpox U A Ersfx Ag Uog carriage length 2600 mm 1250 mm to the right of the blade 380 V, 5.5 HP upper extraction

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Nominal Load Limit at Load Center: 1.8 t Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Kedpsya Da Hsfx Ag Uodg More items – new and used – can be found in our shop! Shipping costs abroad on request!

Condition: ready for operation (used), Year of construction: 2008, overall weight: 1,400 kg, total height: 1,838 mm, product length (max.): 9,400 mm, This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine. • Saw blade motor power: 2.2 kW • Saw blade motor speed: 2800 rpm • Installed power: 5.6 kW • Minimum cutting length: 310 mm • Maximum cutting length: 5000 mm • Saw blade feed speed: 0-60 mm/s • Cutting speed: 66 mm/s • Carriage stroke speed: 20 m/min • Angles: 45°/0/45° • Working pressure: 6-8 bar • Air consumption per cycle at 6 bar: 15 Nl • Saw blade diameter: 450 mm • Saw blade spindle diameter: 32 mm Ksdjx U Drgjpfx Ag Usdg Dimensions Machine Depth 1400 mm

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Kodpjtugggjfx Ag Uodg Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: ready for operation (used), Year of construction: 2009, This HOLZHER CUT 70 6110 panel saw was manufactured in 2009. It features a cutting size up to 3900 × 3900 mm, a maximum cutting height of 70 mm, and saw blade projection of 82 mm. The main sawing unit has a motor power of 11 kW and a blade diameter of 350 mm. It supports a saw carriage and pusher speed of 0–70 m/min. Consider the opportunity to buy this HOLZHER CUT 70 6110 panel saw. Contact us for more information. • Workpiece • Cutting size: 3900 × 3100 mm or 3900 × 3900 mm • Max. cutting height: 70 mm • Max. saw blade projection: 82 mm • Sawing Unit • Motor power: 11 kW • Saw blade Ø: 350 mm • Rotational speed: 4070 rpm Scoring Unit • Motor power: 1.1 kW • Saw blade Ø: 180 mm Kdedsx Ut Ikjpfx Ag Ueg • Rotational speed: 6070 rpm Feed / Carriage • Saw carriage & pusher speed: 0–70 m/min (continuous) • Return speed: 70 m/min • EU feed speed: 0–25 m/min Media • Compressed air: 6 bar, 32 NL per cutting cycle • Dust extraction: • Connections: 1×120 mm (base machine), 3×120 mm (pressure beam) • Capacity: 4500 m³/h • Air speed: 30 m/s Additional Equipment • Number of tables: 3

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Kdodswz Rywjpfx Ag Usg Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,781 h, load capacity: 6,000 kg, lifting height: 6,020 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, fork carriage width: 1,520 mm, fork length: 1,600 mm, total length: 4,900 mm, drive type: Elektro, construction width: 2,450 mm, Electric Side Loader Load Centre: 800 mm Fork Width: 170 mm Fork Thickness: 57 mm Mast Type: Triplex Condition: Ready for operation and fully functional Kdedpfx Aew Irl Tsg Uog Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyre Size: 32x12.5-15 Rear Tyres Type: Pneumatic Rear Tyre Size: 32x12.5-15 Battery Voltage: 120V Battery Capacity: 930Ah Battery Year: 2025 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing on attractive terms are always available. We also purchase your used equipment, even if you don’t buy a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to offer you detailed advice on this EGX 60.33/16-13/60 TR VRS. P.S.: Our certified forklift workshop specialises in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We are also happy to offer your vehicle for commission sale in our facility. Fork Positioner, 2x Telescopic Forks 170x57x1620 / 2600 mm; Traversing Carriage: Opening Range: 4600 / 7030 mm with 2 telescopic forks 170x57x1400 / 2300 mm; Traversing carriage with 2 telescopic forks 170 x 57 x 1400 / 2300 mm; Opening range: 4600 / 7030 mm; Heater, Full Cabin, Full Free Lift, Platform Height: 1050 mm

Condition: new, Year of construction: 2026, High-performance deburring machine for simultaneous internal and external deburring of profiles and pipes in a single operation (approx. 3 seconds). Kodpjnvfl Aefx Ag Uodg Powerful industrial gear three-phase motor with frequency control, allowing stepless speed adjustment: 600 – 2,700 rpm. Designed for deburring pipes and profiles with material dimensions (horizontal/vertical) up to 120 mm. Easily adjustable working table height (adjustable and lockable) to match the required material size. Adjustable, lockable feed (carriage) of the deburring brushes to the working table via hand wheel with locking function. Drawer for dust residue collection. Sheet steel housing prepared for connection to an external extraction system. Folding covers for easy brush changeover. Machine body color: RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm crimped steel wire. Power cable with CEE plug. Operating tools included. 12 months warranty for single-shift operation. Working height: 1050 mm Speed: 600 – 2700 rpm Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 mm Power: 3 kW Electrical connection (V/Hz): 400/50 Brush diameter: 250 mm Standard brush width: 60 mm. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE! REQUEST AN OFFER TODAY!

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Manitou MT1440 ST5 Easy Comfort Rigid Telehandler 4t 14m The MT 1440 Easy telehandler is specifically designed for construction sites where high lifting heights are required. With a lifting capacity of 4 tonnes, it safely places pallets up to heights of 14 m. The robust machine features a metal-clad low entry door and an electric window to minimize breakage risk. Excellent cab visibility allows the operator to monitor site activity at all times and track the load up to the drop-off point. Thanks to multiple tie-down points, the MT 1440 can be transported easily from one site to another and adapts to all types of terrain with its 42 cm ground clearance, three steering modes, and four-wheel drive. Max. lifting capacity: 4,000 kg Max. lift height: 13.53 m Max. reach: 9.46 m Breakout force (with bucket): 7,400 daN Overall length (with fork carriage): 6.02 m Length to front of forks: 6.13 m Overall width: 2.36 m Overall height: 2.45 m Wheelbase: 3.07 m Ground clearance: 0.37 m Cabin width: 0.89 m Upward tilt angle: 12° Downward tilt angle: 114° Turning radius (over tires): 3.94 m Operating weight (with forks): 10,855 kg Gross weight: 10,900 kg Tyres: 400/80 - 24 - 162A8 Engine: Deutz Stage V, Tier 4 final TD 3.6 L Cylinders: 4 - 3,621 cm³ Engine power (HP/kW): 75 HP / 55.40 kW Max. torque/engine speed: 340 Nm @ 1,600 rpm Tractive force: 8,320 daN Ksdpfx Agsxmqw Re Ujdg Transmission: Powershift No. of gears (forward/reverse): 4 / 4 Max. travel speed: 20 km/h Automatic parking brake Oil-immersed multi-disc brakes on front and rear axles Hydraulic pump type: Gear pump Hydraulic flow / pressure: 106 l/min - 270 bar Hydraulic oil: 135 l Fuel tank capacity: 140 l Steering wheels (front/rear): 2 / 2 Driven wheels (front/rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R63 WhatsApp support available! If you have any questions about the vehicle or require further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Manitou MT1840 Easy Comfort Telehandler 18m 4t The MT 1840 Easy telehandler is designed for construction sites that require significant lifting heights. With a lifting capacity of 4 tonnes, it allows pallets to be safely placed at heights of up to 17.55 m. This robust machine is equipped with a sheet metal-clad low door and an electric window to minimize the risk of breakage. Excellent cabin visibility ensures the operator can always keep an eye on site activity and follow the load to its drop-off point. The MT 1840 can be easily transported from one site to another thanks to numerous lashing points, and its 37 cm ground clearance, three steering modes, and four-wheel drive make it adaptable to any terrain. Max. load capacity: 4,000 kg Max. lift height: 17.55 m Max. outreach: 13.08 m Bucket breakout force: 7,400 daN Overall length (with carriage): 6.15 m Length to fork face: 6.27 m Overall width: 2.36 m Overall height: 2.45 m Wheelbase: 3.07 m Ground clearance: 0.37 m Cabin width: 0.89 m Tilt angle (up): 16° Tilt angle (down): 110° Turning radius (over tires): 3.94 m Unladen weight (with forks): 11,710 kg Total weight: 11,710 kg Tyres: 400/80 - 24 - 162A8 Engine: Deutz Stage V, Tier 4 Final TD 3.6 L Cylinders: 4 – 3,621 cm³ Engine output (HP/kW): 75 HP / 55.40 kW Max. torque / engine speed: 340 Nm @ 1,600 rpm Tractive force: 8,320 daN Transmission: torque converter Number of gears (forward/reverse): 4 / 4 Max. travel speed: 20 km/h Automatic park brake, oil-immersed disc brakes on front and rear axles Type of hydraulic pump: gear pump Hydraulic flow rate / pressure: 106 l/min – 270 bar Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Ksdpfx Aoxmqwqog Usdg Errors and prior sale reserved. Internal reference number: R64 WhatsApp support available! If you have any questions about the vehicle or for further information, feel free to contact us easily via WhatsApp. Whatsapp Whatsapp

Condition: new, Year of construction: 2025, Equipment: all wheel drive, soot filter, Manitou MT625 H Comfort 75K ST5 S1 Telehandler 2.5t 6m The MT 625 H telehandler is designed for use on construction sites for new buildings and renovation work on low-rise structures. This compact machine, measuring only 1.80 m wide and under 2 m in height, can easily pass through doorways and is highly maneuverable even on congested sites. With a turning radius of just 3.30 m and three available steering modes, it offers excellent handling. The MT 625 H is user-friendly, equipped with an ergonomic dashboard and the intuitive JSM joystick for simple operation. This telehandler provides a lifting capacity of 2.5 t and a lift height of 5.85 m. Its 75 hp engine enables a top speed of 25 km/h. Maintenance is streamlined through the wide engine hood opening. The 90-liter gear pump allows for simultaneous boom and telescopic movements, boosting productivity. Maximum lifting capacity: 2,500 kg Maximum lift height: 5.85 m Maximum outreach: 3.40 m Breakout force with bucket: 3,427 daN Overall length with fork carriage: 3.83 m Length to front of forks: 3.90 m Overall width: 1.81 m Overall height: 1.92 m Wheelbase: 2.30 m Ground clearance: 0.33 m Cabin overall width: 0.79 m Upwards tilt angle: 12° Downwards tilt angle: 117° Turning radius (over tires): 3.31 m Weight: 4,800 kg Tyres: SKS532 12-16.5 Engine: Kubota Stage V, Tier 4 final Engine model: V3307-CR-TE5B Cylinders / displacement: 4 – 3331 cm³ Engine output (HP/kW): 75 hp / 55.40 kW Max. torque / engine speed: 265 Nm @ 1,400 rpm Drawbar pull: 3,550 daN Transmission type: Hydrostatic Gear (forward/reverse): 2 / 2 Max. travel speed: 20 km/h Automatic negative parking brake Parking brake: Oil-immersed multi-disc brakes on front axle Hydraulic pump type: Gear pump Hydraulic flow / pressure: 90 l/min – 235 bar Hydraulic oil capacity: 115 l Fuel tank capacity: 63 l Steering wheels (front / rear): 2 / 2 Drive wheels (front / rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R122 Kdsdsxmqt Eopfx Ag Ueg WhatsApp support available! If you have any questions about the vehicle or need more information, feel free to contact us via WhatsApp. WhatsApp WhatsApp

Condition: excellent (used), Format Circular Saw FKS 550-3200 M A PRO - Year of manufacture: 2023 - Max. cutting height: 200 mm - Cutting height: 200/140 mm - Crosscut width left of the saw blade: max. 3200 mm - Cutting width with parallel fence: 1450 mm - Saw blade tilting: 90 – 45° - Dimensions (LxWxH in mm): 3,386 x 3,703 x 1,330 - Main saw blade with belt drive and speeds: 2800/3665/4800 rpm - Vibration-free operation due to high dead weight (1,070 kg) - Large support table with material roller - Parallel fence with round bar guide - Extendable aluminium rip fence with digital display (2 folding stops) - Quadruple ball-bearing format sliding table with twin roller carriage made of anodised aluminium, high torsional stiffness - Large pendulum safety guard with gas pressure spring - Multiple locking positions on sliding table - Motorised saw blade tilt & height adjustment with digital display - 8.8 kW main motor - Tool-free rapid system for saw blade clamping - Saw unit can be switched on and off Kedjxfku Tspfx Ag Uodg - On/off switch on the sliding carriage - Edging length: 3200 mm

Condition: used, Electric Forklift Truck OM PIMESPO Type XE 25 ac Counterbalance forklift, electric forklift, compact forklift Serial No. SES23X9-10 – Manufacturer No. F14024W00609 Year of manufacture 2008 Rated capacity 2500 kg Capacity at 500 mm load centre 2500 kg Lift height 4340 mm Overall height 2220 mm (container compatible) Mast height 2220 mm Free lift 1600 mm Fork length 1150 mm Fork width 100 mm Fork thickness 40 mm (actual 38 mm - at heel 35 mm) Fork carriage width 1030 mm Operating voltage 80 Volt - 4-wheel, superelastic, solid rubber tires front 23x9-10 / rear 18x7-8 - Hydraulic power steering - Triplex free lift mast - Sideshift - Overhead guard - Drive battery HAWKER, 80 Volt, 560 Ah, year of manufacture 12/2022, supplied with automatic charger - Operating hours counter shows 2969 hours - New UVV safety inspection by TÜV (additional cost 150,-- EUR net) Length without forks 2400 mm Overall width 1190 mm Own weight with battery 4800 kg Good condition Kodot Ac Erspfx Ag Usdg

Condition: used, Year of construction: 2001, travel -x axis 1800 mm travel -y axis 520 mm travel -z axis 520 mm Kdjdpfxjvh R Txs Ag Ujg tool taper SK 40 table load 3 t tool piece magazine with 30 Plätze spindle drive 22 kW max. torque on the spindle 220 Nm *Machine in very good condition* + Loading door windows have been replaced + Linear guide carriages on X and Y axes have been replaced - Heidenhain iTNC 426-M control system - Partition wall for pendulum operation - Chip conveyor - Filter system - Spindle up to 8000 rpm - Rapid traverse x/y/z: 30/30/30 m/min - Year of manufacture 2001 Control on: 93212:52:14 Machine on: 82284:39:36 Program run: 42385:36:11

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to Kdedjpm U U Nepfx Ag Usg 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Kodpfjiqp Ersx Ag Uedg Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 turning speeds 50 - 12000 U/min no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Equipment: - Chip conveyor - 30-position tool changer - Heidenhain CNC control iTNC 530i - High-pressure belt filter system - IKZ 15 bar - SK40 mounts - Operating instructions The following repairs were carried out in 07/2022: - X-axis guide carriage - Various pneumatic hoses - Safety glass on loading doors - Various push buttons with indicator lights - Door safety switches - X-axis cover (slats) - IKZ filters (4 pieces) - Filter cabinet - Z+Y-axis toothed belts - Door scrapers with dampers - Hose for external cooling, spindle cooling, and spray guns (2 guns) - Set of coolant nozzles for external cooling - 2x falcon bars for the Y-axis - 1x set of door rollers with rail (6 meters) Kodpfev S Irtjx Ag Usdg - 1x Klüber grease with cone reamer

Condition: excellent (used), machine/vehicle number: FBA12-2470-00531, Year of construction: 2017, operating hours: 5,070 h, lifting height: 4,750 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, battery manufacturer: tab, battery capacity: 690 Ah, battery voltage: 48 V, fork length: 1,200 mm, Weights Empty weight: 3.554 kg Battery Battery: 690 Ah, 48 V, Year of manufacture 2017, Brand of battery tab Functional Lifting capacity: 1.800 kg Maximum passing height: 210 cm CE mark: yes Condition Technical condition: very good Kdodpfxjr Eqivo Ag Usg Visual appearance: very good Other information Tyre brand: non marking Fork carriage: Sideshifter Latest inspection: 2024-04-08 Additional information Please contact Johanny Hendrikse for more information

Condition: excellent (used), machine/vehicle number: 8FBMT20-12961, Year of construction: 2014, operating hours: 5,144 h, lifting height: 3,300 mm, free lift: 1,750 mm, fuel type: electric, mast type: duplex, battery manufacturer: Hoppecke, battery capacity: 630 Ah, fork length: 1,150 mm, Empty weight: 3.390 kg Lifting capacity: 2.000 kg Maximum passing height: 215 cm CE mark: yes Technical condition: very good Visual appearance: very good Kdedpswdv A Nsfx Ag Ujg Fork carriage: Sideshifter Latest inspection: 2025-03-05 Please contact Johanny Hendrikse for more information

Condition: excellent (used), machine/vehicle number: FBA17-1390-00801, Year of construction: 2020, operating hours: 1,191 h, free lift: 2,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: Espex, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,600 mm, Weights Empty weight: 4.875 kg Battery Battery: 620 Ah, 80 V, Year of manufacture 2020, Brand of battery Espex Kodjrpgvyjpfx Ag Uodg Functional Lifting capacity: 2.500 kg Maximum passing height: 220 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Fork carriage: Sideshifter Latest inspection: 2024-02-22 Additional information Please contact Johanny Hendrikse for more information

Condition: excellent (used), machine/vehicle number: FRAOF-1380-00038, Year of construction: 2014, operating hours: 5,170 h, lifting height: 8,720 mm, free lift: 3,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: TAB, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, Battery: 750 Ah, 48 V, Year of manufacture 2017, Brand of battery TAB Lifting capacity: 1.600 kg Maximum passing height: 345 cm Kdjdjwdvz Ejpfx Ag Ueg CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-04-09 Please contact Johanny Hendrikse for more information

Condition: excellent (used), machine/vehicle number: 516211E00984, Year of construction: 2014, operating hours: 5,989 h, lifting height: 4,950 mm, free lift: 1,730 mm, fuel type: electric, battery manufacturer: Quality Batteries, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, Battery Battery: 625 Ah, 48 V, Year of manufacture 2021, Brand of battery Quality Batteries Functional Lifting capacity: 1.600 kg Maximum passing height: 215 cm CE mark: yes Kdsdpfxswcv Hre Ag Uog Condition Technical condition: very good Visual appearance: very good Other information Tyre brand: Continental Fork carriage: Sideshifter Charger current: 625 Additional information Please contact Johanny Hendrikse for more information

Condition: excellent (used), mileage: 614,462 km, power: 338 kW (459.55 HP), first registration: 07/2015, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, soot filter, spoiler, = Additional options and equipment = - ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) - Alarm system - Aluminum fuel tank - Leaf suspension - Brake booster - Roof spoiler - Differential lock - Remote central locking - High beam headlights - Low-noise design - Speed limiter - Intarder - Air conditioning - Alloy wheels - Air suspension - Metallic paint - Particulate filter - Radio/CD player - Radio/cassette player - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication = Additional information = Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF, manual gearbox Axle configuration Tire size: 315/70R22.5 Brakes: disc brakes Front axle: steerable; tire tread left: 50%; tire tread right: 50%; suspension: leaf suspension Rear axle: differential lock; tire tread left: 50%; tire tread right: 50%; suspension: air suspension Weights Unladen weight: 7,475 kg Payload: 11,525 kg Kdsdpfx Agex U At Ae Ujg Gross vehicle weight (GVW): 19,000 kg Condition Technical condition: very good Visual condition: very good Damage: none

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 421 h, load capacity: 6,000 kg, lifting height: 3,340 mm, fuel type: gas, Manufacturer: Yale Year of manufacture: 2012 Type: GLP60VX Serial number: D878E01527K Operating hours: 421.00 as of 04/09/2025 Lift height approx.: 3340 mm Overall height approx.: 2740 mm Load capacity: 6000 kg Mast: Simplex Drive: LPG Forks: 150mm x 1200mm Tyres: 2x super-elastic twin, 2x radial Free lift: 100 mm Engine make: GM 4.3 L 75KW Load center: 500 mm Fork carriage width: 150 mm Transmission: Torque converter Additional hydraulics: 3-way Attachment: Sideshift Weight: 9210 kg Vehicle length: 4784 mm Vehicle width: 2082 mm Additional equipment: Fork extension 1800mm Kdsdpfx Agexp Hy He Usg Used vehicle, no exchange, no warranty, no returns. VAT deductible.

Condition: used, functionality: fully functional, Year of construction: 1993, load capacity: 3,500 kg, lifting height: 3,300 mm, Manufacturer: Clark Year of manufacture: 1993 Model: GPX35LPG ID No.: - Serial Number: GPX710-0084-GEF 9205 Operating hours: 5,962 (as of 15.09.2025) Lift height approx.: 3,300 mm Overall height approx.: 2,300 mm Load capacity: 3,500 kg Mast: single stage Kedpfx Ajxp Hymsg Usdg Drive: LPG Forks: 120x50x1200 mm Tyres: 4x super elastic Free lift: 105 mm Engine type: Perkins Load centre: 500 mm Fork carriage width: 1,260 mm Transmission: torque converter Additional hydraulics: 3rd control valve Attachment: side shifter Weight: 5,690 kg Vehicle length: 2,900 mm Vehicle width: 1,350 mm Additional equipment: fork extension 1,750 mm Used vehicle, no exchange, no warranty, no return. VAT deductible.