Used Carriage for sale (1,792)

Condition: used, Year of construction: 2019, operating hours: 7,219 h, lifting height: 5,150 mm, free lift: 1,730 mm, fuel type: electric, mast type: triplex, fork length: 990 mm, fork width: 650 mm, total height: 2,330 mm, total length: 1,650 mm, total width: 1,300 mm, color: grey, Empty weight: 3.335 kg Lifting capacity: 1.200 kg - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 511901V00244 - Operating hours: 7219 - Lifting capacity: 1200kg - Lifting height: 5150mm - Overhead clearance: 2250mm - Free lift: 1730mm - Fork length: 990mm - Maximum fork width: 650mm - Minimum fork width: 210mm - Attachment: 4th valve to fork carriage, Side-shift - Options: Camera, Joystick, Free-lift, Non-marking tires Gedpfx Aeycip Eemueit - Mast: Triplex - Inspection valid until: 03-2026 - Drive: Electric - Brand/Type: 4 HPZS 620 - Battery year of construction: 2017 - Capacity: 620Ah - Battery voltage: 48V - Battery test result: 64% - Driving direction: 2 Road - Transport dimensions: 1650mm x 1300mm x 2330mm (l x w x h) - Transport weight [kg]: 3335kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Gedsy E Nykspfx Amueit Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, Year of construction: 1999, total length: 3,350 mm, total width: 1,550 mm, total height: 1,800 mm, Colour: White Empty weight: 3.300 kg Price: On request In very good condition. In 2017 Refurbished for €32.000 - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Teach-in - Control system brand: Monforts - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 Gijdpfx Ajy Ivx Ejmujt - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3350mm x 1550mm x 1800mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2012, operating hours: 15,892 h, Type of fuel: Diesel Empty weight: 12.600 kg Dimensions (LxBxH): 338 x 226 x 355 cm Lifting capacity: 8.000 kg Lift height: 490 cm Fork dimensions: 1.490 x 2.120 mm - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 2x396c50046 - Operating hours: 15892 - Lifting capacity: 8000kg - Lifting height: 4900mm - Overhead clearance: 3550mm - Free lift: 0mm - Fork length: 1490mm - Maximum fork width: 2120mm Gisdpfeyuxmwox Amust - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Radio, Heating, Full cabin, Drive-in cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Deutz - Transport dimensions: 3380mm x 2260mm x 3550mm (l x w x h) - Transport weight [kg]: 12600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2023, operating hours: 545 h, load capacity: 2,500 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, Field of application: Internal logistics Giedpoxakw Defx Amust Number of valves: 3 General condition: very good Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Please contact Pieter de Vries , , ) for more information Additional options and accessories 3rd valve

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP Gsdpfx Amsf D H Hbsueit -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 235 h, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 1,172 g, total width: 2,030 mm, total height: 2,350 mm, overall weight: 21,500 kg, product length (max.): 7,110 mm, This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • The machine is like new. Technical Machine Benefits • Injection unit size: 2290 • - Max. Injection Pressure: 1421 bar- Max. Stroke Volume: 1232 cm3- Max. Shot Weight (PS): 1172 g- Screw Stroke: 320 mm- Carriage Stroke: 400 mm- Nozzle Contact Force: 30 kN- Injection Rate: 580 cm3/s- Injection Speed: 150 mm/s- Screw Speed: 250 ot/min (RPM)- Plasticizing Rate (GPPS): 77 g/s- Effective Screw Length (L/D): 22.9 • - Number of Heating Zones: 4+1- Installed Heating Power: 39.6 kW Gedpfx Amjx D Iz Ijueit • Clamping Force: 3500 kN:- Distance Between Tie Bars (H x V): 720 x 720 mm- Platen Dimensions (H x V): 1030 x 1030 mm- Mold Opening Stroke: 675 mm- Max. Daylight: 1475 mm- Min. Mold Mounting Height: 250 mm- Max. Mold Mounting Height: 800 mm- Max. Mold Weight (Moving / Stationary): 2630 / 1320 kg- Max. Total Mold Weight: 3950 kg- Ejector Force: 75 kN- Ejector Stroke: 200 mm Extra Information Machine still under power

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Gijdpfxoynky Aj Amujt Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood, automatic feed and return of the saw carriage, infinitely variable control of feed rate, saw blade height, and cutting lengths, pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, three-phase brake motor 6.8 HP / 5 kW and scorer unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm, Gsdpfx Aeyzxkwemuoit good condition, machine ready for immediate use for further technical details, see pdf file (brochure) located in Neustadt/Weinstr. Transport available at additional cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: new, Rexroth roller carriage MNR:R185363110, unused in opened original packaging, 100% functional, scope of delivery as per photos Gjdpfsi Ec Ahox Amuoit

Condition: used, Brand: GEMINIS Model: GHT4 G2 720 x 3000 Cnc: FAGOR 8055 Distance between points 3,000 mm Diameter over bed 720 mm Diameter over carriage 470 mm Bed width 550 mm Rapid traverse X axis 8 m/ min Rapid traverse Z axis 8 m/ min Spindle speeds 0-1600 Number of automatic head ranges 2 Main motor power 20 kW Spindle nose type DIN- 55027-11 MULTIFIX quick change tool holder Quill travel 104 mm Tailstock quill diameter 100 mm Giodpfjy R Evxex Amust Tailstock quill traverse 200 mm Quill tailstock MORSE 6

Condition: used, Year of construction: 1959, total length: 3,500 mm, total width: 1,200 mm, total height: 1,500 mm, Colour: Green Gedpey Idtwsfx Amueit Empty weight: 2.000 kg - Year: 1959 - Documentation available: No - CE certificate present: No - Serial number: 37 - Drive system: Conventional - Centre height [mm]: 270 - Swing over bed [mm]: 540 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 1500 - Bed width [mm]: 450 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 14 - Max. spindle speed [rpm]: 710 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3500mm x 1200mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), functionality: fully functional, CAZENEUVE Lathe HB 500 x 1500 Giodpfoy D Hv Tex Amujt Brand: CAZENEUVE Model: HB500 Distance between centers: 1,500 mm Center height: 200 mm Max turning diameter over bed: 500 mm Max turning diameter over cross slide: 448 mm Max turning diameter over carriage: 220 mm Spindle bore: 40.5 mm Tailstock taper: MT5 Max cross slide travel: 280 mm Number of spindle speeds: 18 Power: 10 HP Spindle speed: from 40 to 3,200 rpm Dimensions (L x W x H): 2,905 x 1,175 x 1,295 mm Weight: 1,950 kg

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Giodey D Hr Ujpfx Amust Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: reconditioned (used), CAZENEUVE HB 575 x 1500 Lathe Gisdsx Ebwfspfx Amuet Distance between centers: 1,500 mm Center height: 250 mm Swing over bed: 575 mm Swing over cross slide: 525 mm Swing over carriage: 300 mm Spindle bore: 51 mm Tailstock taper: MT5 Max cross slide travel: 305 mm Number of spindle speeds: 18 Power: 10 Hp Spindle speed: from 32 to 1,600 rpm Electrical cabinet Dimensions (L x W x H): 2,905 x 1,175 x 1,345 mm Weight: 2,050 kg New Heidenhain DRO Multifix tool post – Fixed steady rest New 2-axis Heidenhain DRO

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. Gsdew Nadyjpfx Amujit PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter Gsdpfx Amsy N Sqmsuoit • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: ready for operation (used), Year of construction: 2007, cutting length (max.): 4,250 mm, Panel saw manufactured in 2007. This HOLZHER 6310 CUT 110 features a cutting length of 4250 mm and a cutting width of 2700 mm. It includes a Cut Control system with touchscreen operation, a saw carriage with main and scoring saw, and a grooving unit with adjustable depth settings. If you are looking to get high-quality cutting capabilities, consider the HOLZHER 6310 CUT 110 panel saw we have for sale. Contact us for further details. • Condition note: not rebuilt – without warranty • Cutting width: 2700 mm (original 5250 mm, shortened by 2550 mm to 2700 mm) • Screen on the right • Control: Cut Control system with touchscreen operation • Angle clamping device on the right • Saw carriage: main/scoring saw controlled • Motor power: 18.5 kW (main) / 2.2 kW (scoring) • Scoring saw: manual adjustment in width and height • Grooving unit: 2 groove height settings (groove depth adjustable 2–12 mm, up to max. 9–19 mm) Gisdpfx Aey N Scpjmuet • Label printer: TLP2742 • Cutting-out unit • Additional blow-off unit traveling with the saw carriage • 3 additional support tables, 2400 mm, with travel mechanism • Control cabinet on machine side, incl. speed monitoring with safety shut-off • Postforming unit, incl. scoring unit • Automatic central lubrication • Enclosed pressure beam • Film cutting device Additional equipment • Optional at extra charge: Dust extraction system (€4,000.00) • Brand: AL-KO • Model: POWER UNIT 300P • Year of manufacture: 2011 • Airflow: 5089 m³/h • Vacuum: 2050 pA • Motor power: 7.5 kW • Suction inlet: 300 mm • Collection: 3 tanks, 250 l each • Integrated automatic shut-off

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1053, 2 CNC bending heads, bending capacity Ø 30 x 2 mm (steel), bending planes freely selectable within 138 mm total tool height, travel path X/Y/Z 1,416 x 260 x 1,170 mm, collet head with feed carriage, PLC control Siemens S7-300, touch display, infeed cycle conveyor, robot, make Motoman, robot controller, type SK16, Teach-In terminal MRC, punching station, make TOX, safety devices, safety fence systems, control cabinets, accessory cabinet with 8 drawers. Giedjyx Etaepfx Amuot

Condition: ready for operation (used), Year of construction: 1995, turning diameter over cross slide: 560 mm, spindle bore: 100 mm, turning diameter: 560 mm, turning length: 3,000 mm, Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Passage: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: kg Blue year: 1995 Options: Tools included Movie available! Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Tube diameter: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: 0 kg Year of manufacturing: 1995 Options: Includes tools Movie available! Gijdpfx Amjrfw Nwsujt Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Padovani Labor 275 E Electronic Teachin Drehmaschine Drehdurchmesser over the bed: 560 mm Carriage door diameter: 100 mm Drehlänge: 3000 mm Transport abmessungen (LxWxH) 490x140x160 cm Weight: 0 kg Construction year 1995 Optionen: Inklusive Werkzeug Film verfügbar! Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Swing diameter over bed: 540 mm Gsdsylpqhepfx Amuoit Swing diameter over support: 300 mm Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws With safety features With removable carriage section With coolant pump With Mitutoyo digital readout 380v Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Also check out our other listings. We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated Giodpfx Aoy Sanromujt clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILSTAHL SÄGE-BOHRMASCHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill line combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drill line. This drilling saw line is ideally suited for economical sawing, drilling, center punching, marking (scribing) and thread cutting of profiles and flat steel bars in steel construction and the steel trade. The Kaltenbach KDX-S drilling machine is equipped with 3 drilling units, each with 26 kW drive power and 5 tool changers. The Kaltenbach M150 length measuring device (measuring carriage) together with the T13 transport system is designed for profile lengths of up to 18 m. The comprehensive transport system for the material transport of sectional steel also has cross tractors at the infeed and outfeed for the cross transport of the sections. The CNC control together with the Kaltenbach Profiline III software enables data processing in DSTV and DXF format. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, giving the operator a good overview. A gripper downstream of the saw is used to remove and eject the first cut or transport the profile to the outfeed area. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw drill line combination consists of: Kaltenbach KDX-S 1015 PROFILE DRILLING SYSTEM CUTTING BAND SAW MACHINE Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III Godpfx Amoymy Imeueit LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Condition: used, Year of construction: 2002, operating hours: 16,767 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Weights Empty weight: 5.530 kg Functional Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Gijdpfxey Rdn Ts Amuet Reconditioned: Yes Fork carriage: Sideshifter Additional information Please contact Bas Sindorf for more information

Condition: used, Year of construction: 2020, operating hours: 9,338 h, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), motor manufacturer: Kubota, fork length: 1,200 mm, Empty weight: 8.040 kg Gijdpfxoy Rdn Ho Amust Lifting capacity: 4.500 kg Maximum passing height: 278 cm Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf for more information