Used Cake Cutting Machine for sale (65,942)

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Dkedpfx Asdzp T Djf Uji Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Year of construction: 2008, condition: ready for operation (used), Main Drive Dkodpfx Afox D Exke Usi Number of axis 3 This 3-axis Prima Power Platino CP4000 was manufactured in 2008. It features a 4 kW power capacity, 18,300 operating hours, and a double table with automatic loading and exchange. The working table measures 3000 mm x 1500 mm. It can cut steel sheets up to 10 mm, wood, and acrylic. Consider the opportunity to buy this Prima Power Platino CP4000 CO2 laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), Thread cutting machine, pipe thread cutter Djdpob A Iyasfx Af Ujki -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Max. working height: 45 mm MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h Dsdpfx Afoyq Ez Hj Ueki The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6063

Condition: excellent (used), Year of construction: 2009, Format (cm): 78 Dodpeynkx Sofx Af Ueki Equipment / Additional information: Side tables, safety barrier, air table, 1x reserve knife

Condition: excellent (used), functionality: fully functional, IDEAL Stack Paper Cutter 5221-95 EP with automatic clamping and programmable backgauge control 520 mm cutting length 80 mm insert height 35 mm residual cut Electromechanical drive for blade and clamping bar. Electrically operated backgauge with EP control module. Digital measurement display, readings in cm/inch (accuracy to 0.1 mm). Direct input of measurements via numeric keypad. Memory key for repeat (chain) cuts. Programmable EP control for 99 programs, each with up to 99 steps (up to 9 dimensions can be saved as a single program step). Program steps can be recalled via Start button. Automatic set function for reference dimension. Programmable paper feed (EJECT). Electronic handwheel with infinitely variable speed for manual fine adjustment of the backgauge. Optical cutting line indicator. Clamping bar guided on both sides, can be operated independently from the blade. Precision backgauge spindle. Adjustable backgauge comb with fine pitch and plastic guides. Two side guides each on the front and rear table. High-quality blade made of premium knife steel. Full steel blade carrier and adjustable blade guides. Two additional side tables included. Comprehensive SCS safety package: Electronically controlled, swiveling safety guard on the front table; transparent safety cover on the rear table; main switch and safety lock with key; two-hand cut operation with repeat cut lock and simultaneous release control; 24-volt control system; patented IDEAL safety drive; automatic return of blade and clamp from any position; disc brake for instant blade stop; blade changing device with covered cutting edge; blade depth adjustment from outside; easy front blade change without removing housing parts. Dedpfjypfpbox Af Uoki Power supply: 230 V / 50 Hz / 1~ Motor power (rated input): 1.1 kW. Dimensions: H 1260 x W 855 x D 1067 mm. Weight: 262 kg. The machine was under a maintenance contract. 2 side tables, spare blade, and 3 cutting sticks included. Shipping available. Please note: Our offers are for used machines, which may show signs of prior use (minor scratches or yellowing may occur).

Condition: used, Year of construction: 2001, functionality: fully functional, cutting width (max.): 1,320 mm, input voltage: 400 V, Equipment: safety light barrier, For sale are 2 machines, being sold as a package. • Wohlenberg W132 guillotine cutter + jogging table. The pallet unloader has already been sold. Year of manufacture: 1979, equipped with cut-computer, 3 blades included. • Wohlenberg W92 guillotine cutter + jogging table. 2 blades included, year of manufacture: 2002 Both machines must be dismantled and collected by 31/03/2026. - Condition: Used - good condition - see photos - This is a commercial sale and VAT will be shown separately on my invoices. Dkedpjxxr Rcsfx Af Uei - Price is net, plus 19% VAT. - The machines are still in use and available by arrangement. - Viewing appointments can be arranged at any time. - Sale without warranty or guarantee.

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Equipment: cutting thickness 40 mm Djdpjvfxw Hsfx Af Uski

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite Dsdpfekdnv Tox Af Ujki - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16/195245, repeat accuracy: 0.025 mm, working range: 3,660 mm, travel distance X-axis: 3,660 mm, travel distance Y-axis: 1,830 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, operating speed: 212 mm/s, table width: 2,000 mm, pressure: 6,000 bar, positioning speed: 12,700 m/min, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, operating pressure: 6,000 bar, cutting speed: 7,620 mm/min, travel speed (max.): 12,700 mm/min, feed length X-axis: 3,660 mm, feed length Y-axis: 1,830 mm, feed length Z-axis: 200 mm, total width: 21,000 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, water pressure: 6,000 bar, compressed air connection: 6 bar, pump pressure: 6,000 bar, product height (max.): 200 mm, working length: 3,660 mm, input frequency: 50 Hz, power: 75 kW (101.97 HP), load capacity: 3,200 kg, throat depth: 21,000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – with precision down to 0.025 mm. Dkodpeyl S Nyofx Af Usi This Flow IFB is not your standard waterjet system. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top range of machines. Comparable new systems today cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BENEFIT YOUR OPERATION: - 87,000 PSI instead of the usual 60,000 PSI: This translates into 20-50% higher cutting speeds and 30-50% lower abrasive consumption, significantly reducing your unit costs in daily operation. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2-4 times the speed of conventional machines – with no need for secondary finishing. - Immediately production-ready after oil change: The system was in regular operation until August 2025. No years of downtime, no hidden damages. Operating hours can be read directly at the control unit during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control system. Your operators are familiar with the interface, and spare parts and support are available long-term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year: 2007 Serial No.: 2006353W-044 Cutting range: 1,830 x 3,660 mm Z-axis: 200 mm Table size: 2,000 x 4,000 mm Table type: slat table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required prior to recommissioning. Operating hours can be read directly at the Sinumerik control during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Slat table with catch basin - Complete electrical cabinets - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available for loading on site. Inspection possible at any time by appointment.

Condition: excellent (used), Year of construction: 1960, machine/vehicle number: 3/60 388, Format (cm): 80 Equipment / Additional information: 1xreserve knife Dksdpfx Asmb U Rcef Uei Condition: Very good condition / New controller

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 6541110, Format (cm): 137 Dkedpjxixdwsfx Af Uei Equipment / Additional information: Side tables, air table, safety barriers, 1xreserve knife -PALLET LIFTER -VIBRO TABLE RAB5 WITH INTEGRATED SCALE (M. No.: 6581211 // Age: 1995) -UNLOADER TR 1ER 145-4 (M. No.: 6591126 // Age: 1995)

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 6386927, Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Hydraulic precision drives for knives and press beams Continuously adjustable pressing pressure with display 99 memory programs with up to 99 steps Dkedpfx Asup Awbsf Uji

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 3392-014, Format (cm): 76 Equipment / Additional information: Side tables, air table, 1xreserve knife Dsdpfx Aowmlc Djf Ujki

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6173431, Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, Djdpfx Afjulxg Ds Uski so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 5511244, Format (cm): 92 Equipment / Additional information: Side table, air table, safety barriers, 1xreserve knife Dkjdpfst Hq Nmox Af Usi VIBRO TABLE RB2 M. No.: 5581092

Condition: excellent (used), Year of construction: 2010, Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Dkedpfx Afoxcaibs Uei

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 7361205, Format (cm): 78 Equipment / Additional information: Dkedjwd N Hzjpfx Af Uoi Safety barriers, side tables, air table, 1x reserve knife

Condition: excellent (used), Year of construction: 2005, Connection values: Single phase, AC 50 ... 60 cycles Djdpfxsxmhhyo Af Ueki Voltage switchable 200/220/240 V ± 10 % Power consumption: 110 W Heat emission: 95 kcal/h Application: Form depth 3…12 1/2" // Form width 148…470 mm Paper weight: Single webs 45…170 g/m2 // Multiple sets 125 ... 300 g/m2 Stack height up to ca. 300 mm The machine worked together in production with MICRO-FORMS LABELLER 18S (Sticks labels on sheets) // Ref. No.: 40016.25

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 7061504, Format (cm): 78 Equipment / Additional information: Dkedpfjphpr Asx Af Uoi Side table, air table, 1x reserve knife

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 167, Format (cm): 58 Equipment / Additional information: 1xreserve knife Very good condition // tested, checked and revised Dsdshu R U Dopfx Af Uoki

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 6390312, Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Dedpfx Ajxugv Sof Uoki

Condition: excellent (used), Year of construction: 1983, wire diameter range: 3,0 - 7,0 mm cutting length: max. 4.000 mm Dsdpfx Ajfkx Trjf Ueki wire feeding speed: 40 - 80 mtr./min *complete with Wire pay-off WEBER DH 1000*

Condition: new, Year of construction: 2025, Description: AORE PG3015 T6: (3 Kw) We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 3 overall dimensions 8635 x 3920 x 2350 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 3 Kw (1~20 Kw as option) - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 3 Kw ) Dsdpsix Nb Njfx Af Ueki - normal steel 20 mm - stainless steel 10 mm - aluminium 10 mm - brass 6 mm - copper 5 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 2100 mm - Y-axis travel 3000 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G tube Double pneumatic Chuck 10 ~ 225 mm cutting 10 till 225 mm sqaer and rond tube lenght 6 meter special software for tube cutting max loade 300 kg Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera 1 on pallet arear and 1 on cutting inside assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why, CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 2 week. Not included. Cit9d2x8ou - we can offer installation cost, depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Denekamp Holland

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PH3015: ( 6 Kw) New from stock We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) Dkjdpfx Afjix Nn Ue Uei - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 25 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 1,5 week. Not included. - we can offer cost also depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Coevorden Holland