Used Cake Cutting Machine for sale (83,896)

Condition: used, Year of construction: 2013, Type Crack Maschine Iedpfx Asx N Nc Hog Ujht In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 23,295 h, control type: CNC control, The original invoice for the machine; it was purchased in 2022 for 225,000 euros and has hardly been used. CO2 Laser Cutting System Manufacturer: TRUMPF Model: TruLaser 3030 Lean Edition L 20 Year of manufacture: 2012 / overhauled in 2023 Operating hours: 23,295 / Working hours: 7,181 Power: 3,200 Watt Max. material thickness Steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Max. feed rate: 140 m/min Positioning accuracy: 0.1 mm Length: 6,500 mm Iedpfox Sxwxsx Ag Usht Width: 7,600 mm Height: 2,200 mm Weight: 12,000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,500 mm, table width: 900 mm, working length: 1,500 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheetmetal, complete close. Ihedpfjx Rn Tmex Ag Ust

Condition: repair required (used), functionality: limited functionality, Year of construction: 2005, operating hours: 54,057 h, Finnpower L6-BL Machine valt uit na 3-4 uur werken. Heeft een controle/revisie nodig. Vermoedelijk verliesstroom op een kabel. Bouwjaar:         2005 Iodpfxjv R Dwij Ag Ueht Laserbron:     54.057 u Machine:      66.724 u Demontage, laden en lossen is ten laste van de koper.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: A0235A0225, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, sheet thickness (max.): 20 mm, Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 4,000 Watts Max. sheet thickness (mild steel): 20 mm Max. sheet thickness (stainless steel): 15 mm Max. sheet thickness (aluminum): 10 mm STANDARD EQUIPMENT: - Enclosed machine frame with integrated CO2 laser unit (TruFlow 4000) including NitroLine, beam tube ventilation with N2 and LensLine, chiller unit - Additional high-dynamic Xp axis - Motion unit for high-precision processing - Drives with maintenance-free three-phase AC servomotors Ihjdpsxx Ddnofx Ag Uet - Enclosed beam guidance system - Automatic pallet changer with longitudinal conveyor belt - Laser logbook function - Laser cutting head with 5” lens - Laser cutting head with 7.5” lens - Quick-change system for cutting head Programming - Programmable cutting gas selection / pressure setting - Programmable power cycles - Automatic sheet edge detection - ControlLine - FocusLine Plus - Laser power control - Positioning laser diode - NitroLine - Microweld - PlasmaLine - ContourLine - SprintLine - Spray device - Automatic shutdown - Work area lighting - Control system Siemens SINUMERIK 840D: Open PC-based control, user-friendly operation, USB interface, online help, diagnostic functions, maintenance logbook, RJ45 network connection, 3.5” floppy disk drive, TFT color display - Workshop programming with TruTops laser lite - CE marking - Safety features: Multi-beam light barriers, multi-chamber extraction, compact dust extractor, and machine enclosure with Makrolon panels Reason for sale: We have purchased a new machine Turbine: Completely overhauled in 2024 HF tube: Almost new Control board: Almost new

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,197 h, This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information. Ihjdpfxex E Eb Ds Ag Ujt Application Types Cutting

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Typ: Palatino 1530 Baujahr: 2012 Isdemx Rrljpfx Ag Usht

Condition: new, Year of construction: 2025, table length 3050 mm table width 1530 mm burner heads 1 stroke 350 mm speed 140 m/min Iedpfx Aowp Ta Nog Uoht

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3309-33, Cutting machine "Wohlenberg SPM 76" with air table, used but in fully functional condition. Inspected according to DGUV valid until 11 / 2026. Ijdpfex Ttl Hjx Ag Ujht

Year of construction: 2002, condition: used, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1,5 control Sinumerik 840C tooth width 5,5 mm spiral angle 0/60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm blade head turning speeds 20-110 1/min Ihsdpegtvbpefx Ag Uet total power requirement 100 kW weight of the machine ca. 16700 kg dimensions of the machine ca. 5200x2300x2400 mm

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches Ihedpfox I Agpox Ag Uot -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Year of construction: 2008, condition: ready for operation (used), A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027. Ijdsx Tumxopfx Ag Ueht

Condition: ready for operation (used), System uncoils construction steel from coil and cuts it to desired length Straightening and cutting-to-length machine 8/10/12/14 mm Ihodpjw Trpcsfx Ag Ujt

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Ihsdshv U Tiepfx Ag Ujt Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 13,000 h, machine/vehicle number: MP2512C1, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,270 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time by 15/12/2025!  The machine has been regularly serviced by Amada. TECHNICAL DETAILS Punching working area X x Y: 2,500 x 1,270 mm Laser working area X x Y: 2,000 x 1,270 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Accuracy: ±0.07 mm Maximum material thickness: 6 mm Press force: 200 kN Ijdpfxjxzf T Ae Ag Ujht Max. strokes X-axis: 370 rpm Max. strokes Y-axis: 280 rpm MACHINE DETAILS Power consumption: 22 kVA Machine weight: 18,000 kg Operating hours Laser hours: 13,000 h Punching hours: 17,000 h Note: Information regarding the tools can be found in the attached images.

Year of construction: 2016, condition: ready for operation (used), Main Drive Number of axis 3 Ihsdpfx Agsx D Dpbe Uet Additional Equipment Incl tower This 3-axis AMADA LC-3015F1NT 4kW CO2 was manufactured in 2016. It features a 4000-watt CO2 resonator and handles a maximum sheet size of 3000x1500mm, including a tower. If you are looking to get high-quality laser cutting capabilities, consider the AMADA LC-3015F1NT machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Ihodsb A Nc Hopfx Ag Ujt -operated: pneumatically -Year of manufacture: 1995

Condition: new, Year of construction: 2024, laser power: 8,000 W, table width: 1,500 mm, positioning speed: 18 m/min, overall weight: 19,000 kg, working range: 3,000 mm, Ealge eVision 1530 Ihjdjtvaw Nopfx Ag Ust 8KW IPG laser source Linear drives on all axes - X/Y/Z Automatic centering system of laser beam Central conveyor under cutting table Mechanical shuttle table (exchange time 9seconds) 2 years warranty Machine only for installation in Belgium, the Netherlands or Luxembourg

Condition: excellent (used), SCM internships in excellent condition Iedpfot Hkq Rox Ag Uoht

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,611,863 h, functionality: fully functional, For sale: Horizon HT-80, year of manufacture 2019. The machine is currently operating reliably in our production and is in good condition. An identical HT-80 is also in stock and available at short notice. Spare parts for the HT-80 are in stock and can be purchased if needed. Parts produced: 2,615,906. The complete system consists of several machines, which you can find in our other listings. If interested, we look forward to your inquiry to arrange a viewing appointment. Price on request. Ihjdpow Hpzdefx Ag Uot

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 14250 kg Control Unit Brand BYSTRONIC Main Drive Laser power 6000watt IPG Number of axis 3 Additional Equipment Incl ByTrans Extended This 3-axis Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 was manufactured in 2014. Ideal for precision fiber laser cutting, this machine ensures efficient operation and consistent performance. Consider the opportunity to buy this Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 fiber laser cutting machine. Contact us for more information. Application Types Cutting Ijdpfox D Eivsx Ag Ujht

Condition: good (used), Thread cutting machine with Stehler jaws, thread cutting head Iodpjb A Ncusfx Ag Ujht -Hole diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg

Year of construction: 2019, condition: ready for operation (used), This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. Ihjdpfxjx D Ir Te Ag Ujt Application Types Cutting

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm Iedpfx Aob A Rctjg Uoht -Weight: 170 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,843 h, Main Drive Number of axis 3 Additional Equipment Ihodpfxox D R Dxe Ag Uet Resonator: 4kW Co2 This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting