Plasma cutting machine plasma power source

Kjellberg HiFocus 80i

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm Gbsdpfx Ahelb I Dasmsr capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical specifications: - Cutting range at 90° (round): 260 mm - Cutting range at 90° (flat): 450 x 240 mm - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure, infinitely adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW Gbodpfx Asgin Ndjhmor - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie Gsdpfx Aerl Irvehmjbr - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Year of construction: 1984, condition: good (used), Part on table ,marked with red ,not come. Gedpfx Ajlz Izlehmebr

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA Gbedpjvqbdyofx Ahmjr - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Gjdpfx Ahewuqbbemebr Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 2925 mm Gbodpfx Ahev T Tcmomor saw band width: 0,9 mm cutting range 90 degrees: round: 270 mm cutting range 90 degrees: flat: 350x240 mm cutting speed: 35/72 m/min height over floor: 1,050 mm total power requirement: 1,9 kW machine weight approx.: 660 kg dimension machine xH: 1,2 x 0,75 x 1,05 m Bandsäge - Halbautomat schwere Industriebandsäge mit Rollenbahn Gehrungsschnitt möglich hydr. Werkstückklemmung i.D. *

Condition: used, Year of construction: 2022, functionality: fully functional, type of input current: DC, cutting height (max.): 285 mm, actuation type: manual, overall weight: 440 kg, saw band length: 2,950 mm, saw band width: 27 mm, Equipment: documentation/manual, For sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf MEP manual bandsaw machine TYPE: SHARK 282 CCS Gbjdpfx Ajy Uwuushmjr Motor power 1.5/1.8 kW Table opening 285 mm Band dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min Cutting capacity at 0° 250 / 220x220 / 280x220 Cutting capacity at 45° right 230 / 200x200 / 220x200 Cutting capacity at 45° left 200 / 170x170 / 200x140 Cutting capacity at 60° right 120 / 80x80 / 140x80 Cutting capacity at 60° left Accessories: - MD 12 micro-dosing device MINI-GF - EL-1/2-2L - Conveyor roller table, type K 110

Condition: excellent (used), Year of construction: 2007, cutting diameter 220 mm total power requirement 0,7 kW Gjdpfx Ahjyw Ti Temebr weight of the machine ca. 0,240 t

Condition: new, Top quality from Taiwan! Saw blade – 2480 x 27 x 0.9 mm Saw speed – 45 / 90 m/min Motor – 400V - 1.1 kW Gbedpfxoga T Eqs Ahmor Weight – 200 kg Cutting capacity at 0 degrees: 225 mm, 190 mm, 150 x 245 mm Cutting capacity at 45 degrees: 145 mm, 150 mm, 150 x 190 mm Cutting capacity at 60 degrees: 90 mm, 90 mm, 90 x 120 mm INCLUDED: * Adjustable material clamp * Graduated scale up to 60 degrees * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop * Cooling pump * Base cabinet * Quick-release clamp * Saw blade