Used Cable Avoidance Tool for sale (40,788)

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Tool grinding machine EWAG WS 11 INCLUDED EQUIPMENT: Kedpsz I Tbxjfx Akwjnc x1 infeed Z-axis : Infeed operation, metric 4 C x1 Cross feed X-axis 4 Q-M x1 grinding stroke 3H : operation of the grinding stroke either by lever or by hand wheel - ref : 111-2-15167 (WS11) x1 grinding spindle Q 36-12, complete 9 JKP x1 workhead spindle with W25 collet reception x1 foot switch 9 M - operation of infeed Z-axis by foot peadal. Infeed stroke steplessly adjustable x1 ISOMA microscope - optic from the front x1 measuring table for microscope x1 ISOMA microscope - optic from the top x1 SIEGFRIED STTV acoustic touch control (grinding wheel to workpiece) in is case x7 grinding wheel flanges Various CBN grinding wheels Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Knodpfx Akezqbmdowoc Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Call or email for further details Knjdpfjxw Iltox Akwec

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, NC Universal 5-Axis Tool-and Cutter Grinder Walter Helitronic Power Technical details: Knjdpfe Aawiqjx Akwjc CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 12-09, Used tool grinding machine Manufacturer: SCHÜTTE Type: WU 405 Year of manufacture: 1998 Machine No.: 12/09 Knsdpfx Aj Aay Dqjkwsc

Condition: used, Year of construction: 2012, Manufacturer: ZOLLER, Model: Smile 400, Year of manufacture: 2012, including evaluation unit, touch screen monitor, multi-function device, manufacturer: Brother, model: MFC 9465CDN, label printer. Knjdpfsz Tpw Uex Akwjc +++ Attention: This item is part of an online auction! +++

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Deckel FP4M universal milling machine in excellent technical and optical condition. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 rpm - Power: 3.7 / 4.4 kW - Spindle brake - Automatic feed: X-Y-Z steplessly adjustable 6.3 / 630 mm/min - Rapid traverse X-Y-Z 1300 mm/min - Fixed angle table - Vertical quill, 90 mm travel - Tool holder ISO 40/M16 - Weight approx. 1500 kg Machine options: Ksdpfx Ajz Atxvjkwenc - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head Includes cabinet with accessories.

Condition: ready for operation (used), Year of construction: 1999, • Year 1999 • In our possession since 08/2024 • Quinto 4 software • Electrostatic filter, Elbaron model Knjdezcvaqspfx Akwoc • Numerous spindles • Recent maintenance performed: external cleaning and repainting, spindle overhaul, spindle belt replacement, brush and front plexiglass replacement, wheel and door rail replacement, machine measurement, offset adjustment, ball reference setting, backlash check, replacement of the air filtration and lubrication adjustment unit, replacement of 4 electric fans.

Condition: used, Year of construction: 1998, Walter Heli-Power Production 5-Axis CNC Tool Grinder. Serial No. 6802 (1998). Country of Origin: Germany Centralised Cutting Oil Tank and Eclipse Automag Oil Filtration/Separation System (2016) Please note: This item will be awarded to the highest bid from Lot 1, Lot 1A or Lot 2 Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser Ksdpfx Akjz Ar Ebewenc

Condition: good (used), Different tool holder HSK 100. Kjdpj Aa Abfofx Akwenc

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Knsdpfxom Uygvj Akwjc Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 430 mm z-travel 400 mm Control HEIDENHAIN, TNC 114 B table surface area 800 x 390 mm spindle taper SK 40 Knedpfxs Adakfe Akwec spindle turning speed range 50 - 2500 U/min spindle drive 3 kW max. torque on the spindle 5 Nm feeds X-axis 4 - 1600 mm/min feeds Y-axis 4 - 1600 mm/min feeds Z-axis 4 - 1000 mm/min rapid traverse X/Y/Z axis 1,6 / 1,6 / 1,0 m/min power feed x/y/z 5000 N table load capacity max. 250 kg total power requirement 6 kW weight of the machine ca. 1,6 t dimensions of machine L x W x H 2,30 x 2,30 x 2,40 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, coolant

Condition: used, Manufacturer: MAHO, Type: MH 700, Serial No. 71249, Travel range X/Y/Z 700 x 450 x 450 mm, Tool holder SK 40, Table size approx. 900 x 400 mm, Control system, Manufacturer: SIPRO, Type: SIAX 121 Kedpfx Asz Tqxgskwsnc +++ ATTENTION: This machine is part of an online auction! +++

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 Kodpfxsy E N Dve Akwenc table 800x460 mm travel 580x400x450 mm max spindle speed 2500 rpm spindle taper 40

Condition: good (used), Manufacturer: COBORN Type: RG4A Year of manufacture: probably around 1999 Machine type: PCD/PcBN tool grinding machine Ksdjz Nf Ubjpfx Akwenc Control: RG5A Controller Grinding motor: approx. 2.2 kW Grinding spindle: Coborn precision spindle Spindle speed: approx. 2,000 / 4,000 rpm, depending on the model Max. grinding stroke: approx. 300 mm Grinding process: oscillating / reciprocating Grinding wheels: diamond, type 6A2 Materials: PCD, PcBN, hard metal Application: cutting inserts, milling cutters, reamers, special tools The machine comes from a company liquidation and was fully functional until recently.

Condition: good (used), Year of construction: 1986, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Kodpfx Akj Aaxkvowonc Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: used, machine/vehicle number: 55191-08, equipped with a 2-axis digital display, manufactured by HEIDENHAIN, with an angular milling head, 2 indexing tables, an additional clamping table, counter support, 3-jaw chuck, various change gears, machine light, and a steel transport cart. Knjdpfez Nhndjx Akwsc

Condition: used, total height: 1,500 mm, total length: 1,200 mm, total width: 110 mm, Year of manufacture: 1998 Colour: Cream Empty weight: 750 kg Ksdpfx Akozry Ivswenc Price: On request - Year: 1998 - CE marking present: Yes - Serial number: 84915 - Control: Conventional - Transport dimensions: 1200mm x 110mm x 1500mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2025, condition: new, functionality: fully functional, Type: TT-108’000 Year: 2025 Operating hours: 0 h (Machine is brand new) For sale due to an incorrect purchase. Kedpfx Akezhpdlewjnc Ready for immediate delivery.

Condition: used, Year of construction: 1965, Technical details: grinding length: 250 mm centre height over plate: 120 mm workpiece length - max.: 600 mm grinding spindle - swivable: 350 ° grinding head adjustable: 230 - 250 mm grinding diameter: 200 mm spindle revolutions per minute : 2200/3500/5200 U/min work table:: 120 × 950 mm table movement: 500 mm table - inclinable: 45 Grad dimensions of grinding wheel: 160 mm total power requirement: 0,5 kW weight of the machine ca.: 0,65 t dimension machine approx.LxWxH: 1.5 × 1.2× 1.65 m The SWU 250 is designed for sharpening and grinding various types of tools. Thanks to the adjustable tool holders and the swivelling grinding head, different tool geometries can be machined. Kodpfx Asz E Hdzjkwsnc *

Condition: used, Trumpf HAAS Type: HAAS Laser HL556D Wavelength of laser light: 1064 nm Minimum power: 5 W Maximum regulated power: 550 W Beam parameter product: 25 mm-mrad External dimensions: Width 1250 mm, Height 1580 mm, Depth 720 mm Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pole, 63 A, 6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are connected to the connections and sealed with two hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20 V ± 10 %, 3P + PE, 50 Hz 20-01-38-00 V ± 10 %, Kjdpfx Aszdrwgjkwsnc 3P + PE, 60 Hz Scope of delivery: (Laser system, laser head, and replacement cable…) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) Ksdpfx Asz Sl Dpokwsnc ——— Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: excellent (used), For sale: a set of Hurst hydraulic rescue tools. - Hydraulic cutters. - Spreader. - Hydraulic pump. Knjdpfxoz Sky Ao Akwec

Condition: good (used), functionality: fully functional, Internal article number: 26051 HSK-A63 Knedpfoz Ha Icsx Akwoc Turning tools Sandvik CoroTurn TR 3x base holders HSK-A63 C4-390.410-63 080C + Insert Coroturn 107 / 5513 020-01 / 5680 049-01 / C4-SDJCL-27050-11 + Insert Coroturn 107 / 5513 020-01 / 5680 049-01 / C4-SDJCL-27050-11 + Insert CoroTurn TR-C4-D13 NCN-00050 5680 049-01 / 5513 020-01 + Insert C4-SRDCN-00050-08A 5513 020-04 / 5680 051-03 + Insert Sandvik C4-LF 151.23-27060-30 + Insert Sandvik C4-SRDN-00050-08A + Various indexable inserts

Condition: excellent (used), For sale: a set of Weber-Hydraulic hydraulic rescue tools. - Hydraulic cutter. - Spreader. - Hydraulic pump. Knsdpfxoz Skxxs Akwec