Used Brochures for sale (263)

Condition: excellent (used), Year of construction: 2018, The Agfa Jeti Tauro H2500 LED is a 2.54 m hybrid flatbed/roll-to-roll UV LED inkjet printer. Colour configuration: CMYK Lc Lm + White + primer (6c W4 P2). Under Premium care service contract. Perfect working conditions. Only 3.500 hours of print. The high-performance UV LED printer for demanding large-format production. 2.54 m print width Bodjzuzm Sopfx Afmolp Up to 275 m²/h UV LED technology Hybrid flatbed + roll-to-roll Up to 1,200 dpi CMYK + Light Cyan + Light Magenta Optional White & Primer Print on rigid and flexible media Designed for high-volume, industrial production One machine. Endless possibilities. From signage and displays to POS, retail graphics, décor and banners, the Jeti Tauro H2500 LED delivers high-quality results with exceptional productivity. For further technical specifications please refer to attached brochure.

Condition: used, Year of construction: 2017, COMPLETE HOOKAH TOBACCO PACKAGING PLANT - TWO LINES + MIXING EQUIPMENT Fixed package: two complete, lightly used hookah (shisha / molasses tobacco) packaging lines with all support equipment, sold together as one lot at one price: - 50g line: up to 120 packs per minute, built 2017, European (mainly Italian) machinery - 250g line: up to 40 packs per minute, built 2018, U.S. and European machinery - Barrel mixing, barrel loading and storage equipment, spare parts and dosing screws Each line runs from bulk tobacco feeding through dosing, flow-pack sealing, check weighing, cartoning and film wrapping. The lines were used from 2017-2018 to 2019 and have been idle since 2020. Location: Gaithersburg, Maryland, USA. Available for inspection by appointment. Reason for sale: the owner stopped plans for U.S. tobacco production because of FDA regulatory requirements. The equipment is not being sold because of any fault. LINE 1 - 50g LINE - UP TO 120 PACKS PER MINUTE (BUILT 2017) 1. Main control cabinet (HMI + PLC) - synchronizes the complete line 2. Manual loading table and feed hopper with twin augers 3. Dosing machine - GB Automazioni (Italy), screw/auger dosing 4. Horizontal flow-pack machine - sealed 50g pouches 5. Inline checkweigher 6. Cartesian robot loader 7. Stepper (indexing) conveyor 8. Case box machine (cartoner) with its own control panel 9. Carpet transfer conveyor 10. Box wrapping machine - film overwrap of each carton 11. Superimpose box unit - carton grouping and stacking 12. Case cross box machine - GB Automazioni (Italy) 13. Overwrapping cross machine - film overwrap of carton bundles 14. Roller exit conveyor LINE 2 - 250g LINE - UP TO 40 PACKS PER MINUTE (BUILT 2018) 1. Material feed hopper 2. Dosing machine - GB Automazioni (Italy) 3. Horizontal flow-pack machine - Delfin 4. Inline checkweigher - Mettler Toledo 5. Stepper conveyor Bodpfsz Rtwasx Afmelp 6. Case box machine (cartoner) 7. Carpet transfer conveyor 8. Box wrapping machine - Barrington Packaging Systems (USA) MIXING AND STORAGE EQUIPMENT (INCLUDED) - 2 barrel mixing / tumbling machines with control panels - Barrel loading machine (lift and tipper) - Blue storage barrels - Stainless steel storage tubs with lids SPARE PARTS (INCLUDED) - Interchangeable dosing screws in several sizes (for setting pack weight) - Spare parts and stainless steel fittings ELECTRICAL AND UTILITIES - 50g line: 220V / 60Hz, 3-phase + PE, approx. 22.5 kW total across 7 supply points (see layout drawing) - 250g line: electrical details available on request - Pneumatic components: compressed air supply required - The equipment has been operated on U.S. 60Hz power DOCUMENTS AVAILABLE - Brochure for each line - 50g line layout drawing with power supply schedule - Additional photos - Videos of the lines running in production and recent walk-arounds PRICE AND TERMS - USD 550,000 for the complete package as described (both lines + mixing and storage equipment + spare parts) - Sold as-is, where-is (EXW Gaithersburg, Maryland) - Buyer arranges rigging, crating and shipping unless otherwise agreed - Inspection welcome: in person, by video call, or by a third-party inspector

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 Blsdpfeh H Duhsx Afmep 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2002, Used Machine Year of Manufacture: 2002 Features and Technical Specifications Bede Af I Uwspfx Afmjlp - CNC machining center for drilling, milling, and grooving operations - HOMATIC 2000 control system with woodWOP for convenient, workpiece-oriented programming - Liquid-cooled milling spindle for consistent operating temperatures and reliable operation at high cutting rates - HSK 63 tool holder with high clamping force for precise machining - Automatic tool changer - Digital axis drives - Positioning accuracy according to the manufacturer: 0.03 mm - Travel speeds X/Y/Z: 80/60/20 m/min - Travel range of the Z-axis: 370 mm - Maximum workpiece thickness: 100 m - Working length X/Y: 3,250/1,300 mm - Usable machining area depends on the tool and unit - Electrical power consumption: 14–22 kW, depending on configuration - Vacuum pump capacity according to brochure: starting at 100 m³/h - Compressed air connection: R 1/2 - Required compressed air pressure: 7 bar - Central exhaust connection: Ø 250 mm - Required extraction capacity: at least 4,950 m³/h Additional features: - Vertical drilling spindles, individually controllable - Horizontal drilling spindles in the X and Y directions - Groove saw unit - 8-position tool changer, moving in the X and Y directions, for short tool change paths - C-axis for freely programmable positioning of compatible units from 0–360° - Crosshair laser as a positioning aid for quick setup - Cantilever table with freely positionable, hose-less vacuum suction cups; alternatively, a base or matrix table - For the console table version: workpiece loading aids, lowerable stops, and electric vacuum monitoring - Weight: approx. 4,500 kg Machine is available for demonstration in 15528 Spreenhagen The connected SCHUKO VacoVent 750 dust collector is also available for purchase: samstag.gmbh/maschinenbestand/1333-5931

Condition: excellent (used), Year of construction: 2017, AGFA Anapurna H2050i LED VERSATILITY. PRODUCTIVITY. QUALITY. A powerful 2.05 m hybrid UV LED printer for high-quality graphics production. One printhead needs replacement Only 975 hours printed, aqcuired from show room Under production, demo possible 2.05 m print width Bodpfx Afszu Audjmjlp Up to 104 m²/h UV LED curing technology Hybrid: rigid + flexible media Up to 3.2 m rigid-media length Up to 45 mm substrate thickness CMYK + Light Cyan + Light Magenta + White Up to 720 × 1,400 dpi Konica Minolta KM1024i printheads White ink for high-impact applications For further technical details refer to enclosed brochure

Condition: good (used), Eurotecnica 384 Perfect Binder 100% functional, ready to use. Manufactured by Eurotecnica, Italy. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. Technical specifications: Maximum format: 325 x 380 mm Spine thickness: 40 mm Cover weight: 300 gsm Blsdpfe Af E A Njx Afmsp Production rate: approx. 200 books/h Weight: 150 kg 230V power supply Material detection sensors, adjustable gluer temperature, automatic cover clamp. Spine milling Easy to use Smooth adjustment of glue thickness

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Permanent software license Manufacturer Company: Massivit 3D Printing Technologies Model: Massivit 1800 Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Bsdpfx Afezcv S Hjmolp Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: good (used), Professional book spine gluing machine for books, brochures, and paper blocks. A robust German gluing machine used in the bookbinding and printing industries. It allows for manual spine gluing – ideal for low-volume production, bookbinding workshops, and printing workshops. Features: • Manufacturer: Tünkers Maschinenbau GmbH • Model: 20118490 Bedpfx Aez Scausfmelp • Intended use: spine gluing of books/blocks/brochures • Manual operation – levers, clamps • Stable, steel construction • Work surface with guides • Adjustable clamping pressure and gluing position Condition: used, very good The machine is complete and fully functional. Standard signs of use are visible.

Condition: like new (used), Year of construction: 2022, The Jeti Tauro H3300 is Agfa's 3.3 m-wide hybrid UV inkjet printer, designed for high-volume production on both rigid and flexible media. Agfa currently lists it with speeds of up to 1,280 m²/h, a maximum print width of 330 cm, and configurable/upgradeable automation, speed and colors Manufacturing Year: 2022 Colour configuration: CMYK Lc Lm + white Roll to roll: included Mileage: lamp usage 600 hours, the printer has very low mileage, like show room printer!!!!! Service: Under Agfa service contract Under production, demo possible Location: Western Europe Print head status: excellent Bodjzx Haropfx Afmslp Availability: September 2026 For further technical details please refer to enclosed brochure Positioning 3.3 m-wide hybrid UV LED inkjet printer Designed for both rigid and flexible substrates 6-color configuration Standard productivity: up to 450 m²/h Can be upgraded to H3300 HS, reaching up to 600 m²/h Optional white, or white + primer Built for high-volume / multi-shift production A Agfa +1 Main commercial advantages Growth path: start with the H3300 S and upgrade as production volume increases. Wide application range: signage, displays, POP/POS, boards, banners, décor, packaging and other rigid/flexible applications. Low ink consumption: Agfa's Thin Ink Layer™ technology helps reduce ink usage while maintaining strong image quality. Automation: options include automatic board feeding and automated loading/unloading. Asanti workflow: integrates production preparation, job management and calibrated print modes for color consistency.

Condition: used, Year of construction: 2013, operating hours: 5,800 h, fuel type: diesel, output current: 361 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 250 kVA, motor manufacturer: Volvo Penta, No. 10038 Diesel generator set Stiegele / Volvo Penta 250 kVA Used, year of construction 2013, approx. 5800 operating hours According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Rated output 250 kVA / 200 kW at power factor cos φ 0.8 Voltage 400 V, 3-phase, 50 Hz Rated current 361 A Speed 1500 rpm Generator duty type S1 (continuous operation) Diesel engine Volvo Penta TAD 734 GE Engine output 250 kW / 335 hp Speed 1500 rpm Alternator Mecc Alte ECO 38-1LN/4 Insulation class H Protection rating IP21 Control system ComAp InteliGen NT Circuit breaker ABB SACE Tmax Emergency stop switch Battery isolator switch Electric starter with starting batteries Soundproof enclosure with large service doors on both sides Base frame with integrated fuel tank Weight approx. 4500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price Bedpo Afbuuofx Afmelp To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Year of construction: 2022, The EFI VUTEk h5 is a premium, high-volume 3.2-meter superwide hybrid production printer reengineered from the ground up to offer extreme efficiency, unmatched versatility, and maximum throughput The EFI VUTEk h5 platform acts as a true industrial hybrid, effortlessly transforming from a high-speed rigid flatbed press to a heavy-duty roll-to-roll media system. By combining premium imaging with an elite automation framework, it allows print shops to dramatically lower delivery times and process up to 109 boards per hour Configuration: 8 colors + w Bodpfx Afoxanwzsmjlp Productivity: 109 boards per hour Under production. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.

Condition: used, Year of construction: 2004, power: 16.2 kW (22.03 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edgebanding thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Connected load of the basic machine 16.2 kW Power supply 400 V / 50 Hz / 3-phase Pre-milling unit Gluing unit Quickmelt End trimming unit with program-controlled switching between straight and bevel trimming Combination trimming unit for flush, bevel and radius trimming Corner rounding unit Profile scraping unit Flat scraping unit Buffing unit for polishing the edges Release agent spraying system Additional equipment: Hot air system Schugoma HDL3020 Retrofitted hot air system, year of construction 2015 Power 6 kW Separate control unit Hot air activation of the functional layer of compatible zero-joint edgebanding (laser edgebanding) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse Bledpfez Rgpcjx Afmsp

Condition: good (used), Year of construction: 1994, functionality: fully functional, Nestro Dust Extraction System Dust Extraction Nozzle D = 160 mm Motor power 2.2 kW Filter area approx. 11.5 m² External dimensions L x W x H approx. 1350 x 860 x 1960 mm Weight approx. 240 kg One chip collection bin / approx. 185 l Bsdpfozhv Nnjx Afmelp Max. rated volume flow 1780 m³/h Associated negative pressure approx. 2400 PA All information is subject to change. This information was taken from a brochure.

Year of construction: 2023, condition: new, functionality: not functional, machine/vehicle number: 75010; 75011, We offer two ElectraTherm AC800 ORC units for generating electricity from waste heat, including two external LU-VE air coolers. The units were manufactured in 2023 and are installed at the premises of EKOLOGIE s.r.o. (ekologiesro.com) in Rynholec, Czech Republic. They are in new, unused condition and have never been put into operation. The equipment is available immediately; dismantling will be handled by the seller. TECHNICAL DESCRIPTION The equipment operates on the principle of an organic Rankine cycle (ORC). The AC800 design is based on the PM75 series and utilizes a modified internal hydraulic circuit that allows for independent cooling of the outlet heat to the desired parameters. EQUIPMENT IDENTIFICATION • Manufacturer: ElectraTherm, by BITZER Group • Commercial designation: AC800 • Model according to the nameplate: ET75B • Manufacturing design: AC800-IP • Serial numbers: 75010 and 75011 • Year of manufacture of both ORC units: 2023 TECHNICAL DATA ACCORDING TO THE NAMEPLATES • Maximum gross electrical power of the generator: 75 kW per unit • Total maximum gross power of both units: 150 kW • Electrical system: 400 V, three-phase, 50 Hz • Operating range of hot water temperature: 65–115 °C • Maximum hot water flow rate: 83 m³/h per unit • Working fluid: R245fa • Nameplate weight "Tare Weight": 2,979 kg per ORC unit, excluding the external cooler • Maximum nameplate power consumption: 11.2 kW for unit 75010 and 11.5 kW for unit 75011 The stated electrical powers are the maximum gross values of the generators. The actual power depends on the conditions of the heat and cooling sources; the net power of the entire installation also depends on the consumption of auxiliary equipment. SCOPE OF SUPPLY • 2× ElectraTherm AC800 ORC unit • 2× external LU-VE air cooler, each with six fans External pumps, separate external heat exchangers, or connecting pipes are not included in the sale. These parts must be procured separately by the buyer. External pipes and other peripheral technologies shown in the photos are not included in the offer. SALE AND AVAILABILITY Blsdj Ag N T Iopfx Afmop • Preference is given to selling both sets together; selling one set can be discussed • Price is negotiable • The seller is a VAT payer; the offered price is stated excluding VAT • Availability: immediately • Dismantling will be handled by the seller • Location: Rynholec, Czech Republic The attached brochures present the AC800 model series and the base ORC module PM75, from which the AC800 design is derived. The PM75 sheet serves as supplementary technical information. The specific parameters of the offered AC800 units are stated in this advertisement and in the photos of their nameplates. The scope of supply corresponds exclusively to the description of the offer.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 530 mm, displacement volume: 159 cm³, injection pressure: 2,000 bar, injection weight: 146 g, mold height (min.): 175 mm, ejector force: 40 N, ejector stroke: 125 mm, plate width: 775 mm, plate height: 775 mm, total length: 5,450 mm, total width: 1,550 mm, total height: 1,950 mm, overall weight: 5,850 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF160 IU320 D=35 Fully electric SGM – ejector, nozzle system, core pulls are servo-hydraulic Clamping force 160T Tie bar spacing 530x530 Tool installation height 175 to 620 Robot interfaces Euromap 18 and Euromap 67 Warranty can optionally be extended to 24 or 36 months. Blsdpfjzz Sp Rex Afmjp Suitable 12 kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: CE standard Hybrid machine Maximum tool height increased by 100 mm Bimetal screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 2 additional hydraulic core pulls with end switch monitoring 2 air blow-off units, permanently mounted on the fixed platen Dosing signal interface with HAN-3A connector, plus 1 additional 220 V / 10 A Schuko socket 20 mA interface for mold temperature controller 1 set of 4 × 2 water manifolds on the back of each platen with 3/8" connection 2 sets of water manifolds, each with 4 lines Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable inputs/outputs Centering rings on both platens according to Euromap 18/67

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Technical Specifications Paper Size: Width: 210–370 mm, Length: 210–670 mm (extendable up to 1,000 mm) Paper Weight: 110–350 g/m² (coated, uncoated, and laminated paper) Processing Capacity per Sheet: Up to 8 longitudinal cuts (6 standard, expandable to 8 with an additional module), 30 cross cuts, and 20 creases in a single pass Speed: 30 sheets per minute (A4, short-edge feeding, 2 cuts, 1 crease) Bljdpfx Asz Rz D Ujfmjp Feeding and Stacking: Input tray capacity: 100 mm; Output stacker capacity: 140 mm Dimensions: 2,310 mm (W) × 1,005 mm (D) × 1,110 mm (H) – operating configuration Weight: 275 kg Connectivity: USB 2.0 with standard PC Controller software Product Description The Duplo DC-646 Slitter/Cutter/Creaser is a premium print finishing solution designed for medium- to high-volume digital print providers. Engineered to handle demanding production tasks with ease, it combines slitting, cutting, creasing, and optional perforating in a single pass, making it ideal for producing business cards, menus, brochures, and direct mail materials. The DC-646’s advanced feeding system ensures accurate and reliable paper handling, while its CCD camera and barcode reader automate job setup for seamless production. Its modular design allows for customization, including the use of rotary tools for creasing and micro-perforating, providing print service providers with the flexibility to meet various finishing requirements. With a processing speed of up to 30 sheets per minute, the DC-646 increases productivity while minimizing manual intervention. Equipped with PC Controller software and the ability to store an unlimited number of jobs, it enables quick job changeovers and consistently precise results, saving print service providers valuable time and resources while delivering professional-quality finished products.

Condition: new, OptiProLam 360 Automatic Laminator with Digital Foiling The OptiProLam 360 is a fully automatic laminating and digital foiling system designed for today's commercial and digital print environments. Handling sheet sizes up to 360 x 570 mm, the OptiProLam 360 delivers exceptional lamination quality, premium digital foiling capabilities, and outstanding production efficiency in one compact finishing solution. With automatic suction feeding, pneumatic roller pressure and the ability to laminate both sides of the sheet in a single pass, the OptiProLam 360 is designed to increase productivity, reduce operator intervention and open up new opportunities for value-added print. Key Features Sheet size up to 360 x 570 mm Single-sided lamination Double-sided lamination in one pass Production speeds up to 9 metres per minute Automatic suction feeder Oil-filled heated chrome laminating roller 150 mm pile feeder capacity Automatic sheet registration with adjustable overlap Self-centring sheet guides Pneumatic roller pressure system Pneumatic burst separation with micro-perforation Touchscreen speed and temperature control Adjustable de-curling system Integrated digital foiling rewinder Advanced Lamination Performance The OptiProLam 360 features an oil-filled heated chrome laminating roller, designed to provide even and stable heat distribution across the full working width. Combined with adjustable pneumatic roller pressure, this helps deliver reliable laminate bonding and a smooth, professional finish across a wide range of digitally and lithographically printed materials. Benefits include: Oil-filled heated chrome roller for stable, even heat distribution Pneumatic roller pressure for consistent pressure across the sheet Reliable laminate bonding Smooth, professional finishing Consistent results across a wide range of printed media With production speeds of up to 9 metres per minute, the OptiProLam 360 combines professional lamination quality with the productivity required for busy digital print environments. Single & Double-Sided Lamination in One Pass Designed for maximum efficiency, the OptiProLam 360 offers both single-sided and double-sided lamination in a single pass. Unlike single-sided systems that require two passes for double-sided lamination, the OptiProLam 360 completes the process in one operation, dramatically improving workflow efficiency and reducing production time. Benefits include: 50% reduction in production time Increased productivity and throughput Reduced labour requirements Reduced operator handling Faster turnaround times Consistent, high-quality results on both sides of the sheet Whether producing brochures, book covers, presentation folders, menus, packaging, or premium marketing materials, the OptiProLam 360 enables more work to be completed in less time. Specifications Manufacturer Glendale Model OptiProLam 360 Condition New Stock Number 115002 Max sheet size 360mm x 570mm Min sheet size 150mm x 280mm Sheet feeder Yes, suction feed Feeder capacity 150mm Paper weights 80gsm - 350+gsm Speed Up to 9 metres per minute Single & double-sided lamination Yes Roller pressure Pneumatic Sheet separation Automatic, via pneumatic pressured roller Warm up time 5 minutes Digital foiling Yes, rewinder included Air compressor Included Power supply 220/240v 50/60Hz Machine weight 312kg Dimensions (L)1990mm x (D)750mm x (H)1420mm Bjdpsz H Sa Rsfx Afmjlp

Year of construction: 2009, condition: used, travel distance X-axis: 7,530 mm, travel distance Y-axis: 1,180 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 18,000 rpm, Equipment: CE marking, documentation/manual, No. 3281 CNC profile machining center Schüco PBX AL 7200 Used, year of construction 2009 According to our customer / the previous owner, the machine is fully functional and can be viewed on site 4-axis CNC machining centre for milling and drilling thin-walled aluminium profiles and structural steel profiles made of steel grades S 185 to S 275 Suitable for window and door profiles Max. profile wall thickness 5 mm Max. depth of cut in aluminium 2 - 3 mm Max. depth of cut in steel 1.5 - 2 mm Max. profile machining length 7200 mm X-axis travel 7530 mm Y-axis travel 1180 mm Z-axis travel 660 mm X-axis travel speed max. 60 m/min Y- and Z-axis travel speed max. 30 m/min A-axis rotational speed max. 17 rpm A-axis rotation angle max. 180° Machining on three sides of the profile Positioning accuracy +- 0.1 mm / 1000 mm Spindle power 5.5 kW at 6870 rpm Spindle speed max. 18000 rpm Tool holder SK 30 8-position tool magazine Tool change time approx. 12 - 14 s 8 pneumatic clamping blocks with automatic positioning Double clamping unit for holding two profiles Front clamping position max. 250 x 200 mm WH Rear clamping position max. 120 x 200 mm WH CNC control Schüco CAM and SchüCal PC operator station with monitor and keyboard Electrical connection 400 V / 50 Hz / 3 phases Rated current consumption 35 A Required on-site fuse protection 50 A per phase Pneumatic operating pressure 6 bar Minimum supply pressure 4.5 bar Max. short-term air flow rate 150 l/min CE marking Technical documentation available as PDF file Weight approx. 3450 kg Sale on behalf of customer, ex location near 080 01 Presov (Slovakia), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Bodpfx Afjz Evb Asmslp Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2005, AMADA MODEL HFT 130-4 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 AMADA CONTROL 4 AXIS cnc control, FEISSLER machine mounted laser guards , side and rear interlocked fencing Model Amada HFT 13/3 downstroke CNC Press brake Year 2005 Tonnage 1300 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 11kw Weight 8750 kg Bed Length 3000 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control Bodpozbqnyjfx Afmslp can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, This listing is for a Sartorius Practum 513 Balance The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: Bledpfx Ajxv Abtefmop A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 53 mm, clearance between the columns: 530 mm, displacement volume: 518 cm³, injection pressure: 1,830 bar, injection weight: 477 g, mold height (min.): 180 mm, ejector force: 62 N, ejector stroke: 150 mm, plate width: 700 mm, plate height: 700 mm, total length: 5,800 mm, total width: 1,450 mm, total height: 1,800 mm, overall weight: 5,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 201 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A6-IU945 D=53 Servo-hydraulic with electric screw drive Clamping force 160T Tie bar spacing 530x530 Tool installation height 180 to 650 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: 3 × 400 V + N + PE / 50 Hz Germany – CE standard KEBA 2985 control system Standard screw and cylinder unit PID control of the nozzle Thermal insulation cover for the cylinder Closed cooling circuit for the cylinder’s feed zone 1 air blow-off unit on the fixed mold plate EU67 robot interface Centering ring on the fixed mold plate EU2 ejector bore 1 additional 32-A socket Plasticizing interface Cooling circuit of the heat exchanger controlled via solenoid valve Tool thickness increased by 100 mm Bjdpfx Afszz Sw Iomjlp Moving mold plate with 2 hydraulic core pulls, each with pressure relief Fixed mold plate with 2 hydraulic core pulls, each with pressure relief EUROMAP-13 core pull interface on the fixed mold plate EUROMAP-13 core pull interface on the moving mold plate Oil preheating Additionally 6 DI/DO signals as reserve (KEBA) Free programming (KEBA)

Condition: used, Year of construction: 1992, FORMATTING BAND SAW WITH HYDRAULIC FEED, PANHANS 690 Year of manufacture: 1992 Blodpjzr Hncofx Afmsp In working condition Data according to brochure: Table size 750 x 1200, height 860 Maximum cutting height 140 Largest saw blade diameter 450 Cutting length 2800 Space required 3500 x 5600 Weight 950 Price is ex works.

Year of construction: 2015, condition: used, Year: 2015 Condition: good, functional Counter: 3,8M Automatic Wire-O Binding Line with Integrated Calendar Hanger Insertion The RENZ ABL 500 equipped with the KAS 300 IL unit is a professional industrial solution for the fully automatic production of calendars, brochures, catalogues and other Wire-O bound products. Thanks to its high productivity, fast job changeover and precise automation, it is one of the most efficient systems in its class and is ideally suited for commercial printing companies, bookbinding facilities and calendar manufacturers requiring maximum production quality and efficiency. Configuration - RENZ ABL 500 - KAS 300 IL – Integrated Automatic Calendar Hanger Insertion Unit - Tooling: - 1/4" - 5/16" Features - Fully automatic double-loop Wire-O binding Bedpfx Aszm T Sqsfmslp - Automatic feeding of pre-collated punched book blocks - High-precision automatic wire closing - Automatic insertion of calendar hangers using the integrated KAS 300 IL unit - Fast format changeover via touchscreen control - High production capacity of up to 2,000 finished products per hour - Reliable operation designed for continuous industrial production - Robust construction ensuring long service life and low operating costs Technical Specifications - Maximum binding width: 500 mm - Minimum binding width: 70 mm - Maximum book thickness: 15 mm - Wire diameter: 5.5–19 mm (3/16"–3/4") - Wire pitch: 3:1 and 2:1 - Mechanical speed: 2,100 cycles/hour - Production output: Up to 2,000 bound products/hour - Format changeover time: Approx. 3 minutes - Closing bar changeover: Approx. 20 minutes - Power supply: 3/N/PE 400/230 V, 50 Hz - Installed power: 3.5 kW - Required compressed air pressure: 7.5 bar - Compressed air consumption: Approx. 450 l/min - Machine dimensions (L × W × H): Approx. 3,300 × 2,300 × 1,600 mm - Machine weight: Approx. 1,300 kg KAS 300 IL Calendar Hanger Insertion Unit The integrated KAS 300 IL unit automatically feeds, forms and inserts calendar hangers during the production process. It processes straight wire lengths from 80 to 300 mm and operates in perfect synchronization with the ABL 500 binding line. This enables the production of fully finished calendars ready for packaging without any additional manual operations. Applications: The machine is ideally suited for the production of: - Wall calendars - Desk calendars - Catalogues - Brochures - Manuals - Presentation materials - Sample books - Notebooks and other Wire-O bound printed products

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Blodpfx Afozbql Somep Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine Bedpsy S Edxsfx Afmjlp 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location