Used Brochures for sale (228)

Condition: used, This listing is for a Sartorius Practum The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” Hsdpfoxv Abtjx Aa Eog The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Condition: excellent (used), Overview The Morgana AutoCreaser Pro 50 is a high-performance, fully automatic creasing and perforating machine for SRA3 and B3 sheets. Upgraded from its predecessor, it features the advanced Pro SmartScreen touchscreen interface, making setup quick and intuitive. Capable of handling 80–400gsm stock, the Pro 50 delivers precise, professional results at high production speeds—up to 8,500 A4 sheets per hour or 11,000 A5 sheets per hour. This 500mm machine supports vertical and horizontal creasing and is ideal for commercial printers, digital print shops, and in-plant finishing operations. The intuitive interface allows operators to select fold types, input sheet size, and make adjustments instantly, reducing setup time and improving productivity. Key Features 7" Pro SmartScreen touchscreen – easy, intuitive job setup and control Fully automatic operation – feeds, creases, and perforates with minimal operator input High-speed productivity – 8,500 A4 sheets/hour, 11,000 A5 sheets/hour Versatile creasing – up to 16 creases per sheet, vertical and horizontal Wide stock compatibility – 80–400gsm, up to 0.4mm thickness Large sheet capacity – up to 700mm × 500mm Hsdpfx Aox Nqmtea Esg Unlimited job memory – store and recall multiple jobs with alphanumeric naming Standard perforation – with multiple wheel options for custom finishes Why Choose the Morgana AutoCreaser Pro 50? Fast and accurate finishing for brochures, book covers, greeting cards, menus, and mailers Reduced training time with touchscreen controls and automatic setup Handles high-volume jobs without loss of precision Versatile and reliable – suitable for digital and commercial print applications Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert training and ongoing support – we ensure you get the best results from your equipment. Competitive pricing on consumables – keep your finishing costs low with affordable supplies. Trusted supplier – years of experience in print finishing solutions with both new and used equipment

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Hedpfx Aju Iukfja Eog Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, functionality: fully functional, machine/vehicle number: 19111064, Good day, We hereby offer you, without obligation, a used bench drill type TB 10 from the manufacturer Flott. Manufacturer: FLOTT Type: TB 10 Hedpfxex Rcrds Aa Eeg Machine No.: 19111064 Drilling capacity in steel, approx. Ø 10 mm Drilling capacity in aluminium, approx. Ø 12 mm Speed range (rpm): 400 – 4800 rpm Note: The above-mentioned technical data have been taken from the operating manual, manufacturer’s brochures, or other sources, for which we cannot guarantee the accuracy or completeness. Scope of delivery: - 1 used Flott TB 10 bench drill, without vice - 1 steel pedestal base Application area and condition: The machine was sporadically used in a factory locksmith’s workshop for repair work and reproduction of spare parts for our own machinery. The machine is fully functional and can be inspected under power in our workshop. We would be pleased if this machine is of interest to you. Your Service Team at Mertens & Frowein GmbH

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Hedpjx Ndu Dsfx Aa Esg Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 14,000 mm, total length: 17,420 mm, total width: 14,000 mm, total height: 4,850 mm, overall weight: 37,000 kg, New scalping screen available from stock. Edge S18 Dual Power. See brochure with all (technical) details. Hedpfx Aajv A S Nks Eeg Shaking sieve, scalping screen, vorsieb

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Hodpfx Aaexnxy No Eeg Includes Plockmatic Pro35 WITHOUT IDM You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen Hodpfxsvxfkgo Aa Eeg - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Hedpoxqf U Sjfx Aa Ejg Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Condition: used, functionality: fully functional, Good day, We are pleased to offer you, without obligation, a used universal/vertical milling machine, model SH 4 D, manufactured by Steinel. Manufacturer: Steinel Model: SH 4 D with vertical milling head FVK 3 Machine no.: 8160 Travel range X-Y-Z axis: X = 300 mm, Y = 150 mm, Z = 250 mm Table size: 740 x 200 mm Hsdpfsx Rcpiox Aa Ejg Clamping surface: 620 x 130 mm Spindle speed: 32 – 1250 rpm Feed rates: 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke: 100 mm Main motor power: 1.5 kW Weight: approx. 800 kg Space required: approx. 1,100 x 1,300 x 1,600 mm Control: conventional Note: The above technical data is taken from the operating manual, manufacturer’s brochures or other sources for which we cannot guarantee the accuracy or completeness. Scope of supply: 1 used universal/vertical milling machine, Steinel, type SH 4 D Field of application and condition: The machine was occasionally used in a maintenance workshop for repair work and reproduction of spare parts for our own machine fleet. The machine is operational and can be inspected under power in our workshop. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2005, No. 3256 CNC machine for pallet production Sysmathick RPA9 + stacker Used, year of construction 2005, machine already dismantled Machine for assembling wooden parts with top and bottom nailing The RPA9 is a machine with circulation chains for the production of pallets in standard dimensions according to four templates (maximum 1600 x 1400 mm LW) Operation via a touchscreen Format changeover within a few minutes Two programming methods: - digital programming via PC (input of coordinates) - Manual programming via touch screen Storage of tens of thousands of products Automatic control of the distance between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top 3x N58 & 3x N400, bottom 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-level pallets thanks to the heads Equipped with pneumatic cylinders Pneumatic pressing of the boards during assembly Hodpfsx Dddxox Aa Eog Minimum pallet dimensions 600 x 300 mm LW Maximum pallet dimensions 1600 x 1400 mm LW Maximum template dimensions 1700 x 1600 mm LW Maximum nailing capacity 1600 x 1400 mm LW Maximum pallet height 190 mm Minimum pallet height 110 mm Machine capacity 60 - 200 pallets/hour Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2008, Manufacturer: Kolbus / Cermi • Model: XCR 650 • Machine Type: Front-Cut / Front Cutting Unit for Flap and Brochure Production • Application Area: Print Finishing / Book and Brochure Manufacturing • Function: – Gathering channel with feed and alignment of brochures – Opening of inserted flaps – Front-Cut: Precise front cut for processing flap brochures – Automatic feeding and stacking of finished products • Fields of Application: Hjdpfx Aajx Hxq Ij Ejg – Processing of flap brochures and similar print products – Inline integration into finishing or binding lines – Can also be used as a stand-alone machine • Format Range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Performance: – Mechanical output depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible :contentReference[oaicite:1]{index=1} • Special Features: – Precise front cut for demanding brochure formats – Suitable for inline production lines – Robust, industrial-grade design • Typical Industries: Print finishing, bookbinding, printing houses

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta SD-513 brochure finisher. Item for sale: 1 x Konica Minolta SD-513: Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). Hsdpfx Aaox D Ab As Ejg The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 1981, Manual height and swivel adjustment of the milling spindle Control panel on top Table size approx. 1100 x 760 mm Table height approx. 865 mm Motor power 4.7/5.7 kW Spindle speeds 3000/4500 / 6000/9000 rpm Height adjustment approx. 150 mm Hodpsx Eyh Eefx Aa Eeg Required space approx. 1300 x 1100 mm Weight approx. 850 kg Further technical data available on request All data taken from a brochure; therefore, all information is without guarantee.

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Hodpfx Asx H Al Asa Eeg Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2881, spindle bore: 56 mm, turning diameter: 300 mm, turning length: 1,000 mm, quill diameter: 60 mm, quill travel distance: 150 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, Good day, We hereby offer, without obligation, a used lead and feed screw lathe from manufacturer Weiler. Manufacturer: WEILER Werkzeugmaschinen GmbH Model: Commodor Year of manufacture: 1990 Machine No.: 2881 Spindle: Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm Internal taper: Morse 6 Faceplate diameter: 300 mm Chuck diameter max.: 250 mm Tool Slide: Bed slide guide length: 380 mm Handwheel drum on apron: 1 revolution = 25 mm Graduation: 0.1 mm Cross slide travel: 215 mm Indexing ring graduation: 0.05 mm Top slide travel: 115 mm Indexing ring graduation: 0.05 mm Height from tool support surface to center: 38 mm Max. tool cross-section: 25 x 25 mm Tailstock: Quill travel: 150 mm Quill diameter: 60 mm Internal taper: Morse 4 Quill scale graduation: 1 mm Handwheel drum graduation: 0.05 mm Lateral movement: +/- 10 mm Spindle speeds: Single-speed motor: 50 – 2000 rpm Pole-change motor: 25 – 2000 rpm Main drive power: 4 kW Operating voltage: 380 V, 50 Hz Rated current: 9.5 A Main fuse: 25 A Feeds: Number of feeds: 60 Longitudinal feed range: 0.026 – 0.888 mm/rev Cross feed range: 0.013 – 0.444 mm/rev Thread pitches: Metric: 0.36 – 12 mm Inch: 2 – 45 TPI Module: 0.2 – 4 mod. Diametral pitch: 5 – 90 D.P. Leadscrew pitch, standard: Metric: 6 mm Inch: 4 TPI Dimensions and weight: Installation dimensions: 2350 x 1000 x 1400 mm (L x W x H) Center height over floor: 1100 mm Net transport weight: approx. 1500 kg The following accessories are included with the machine: - 3-jaw chuck - Drill chuck with MT fitting - Coolant system - Work lamp - Chip guard (rear wall) Note: The above technical data is taken from the operating manual, manufacturer brochures, or other sources. We cannot guarantee its completeness or accuracy. Scope of delivery: 1 piece used leadscrew lathe Weiler Commodor Hjdpfxox Rcnlo Aa Eog Application range and condition: The conventional lead and feed screw lathe was used sporadically for repair work and reproduction of spare parts for our own machinery in a company workshop. It is suitable as a compact, conventional lathe for company workshops, as a training machine in vocational schools, and as a backup machine. The lathe is fully functional, in good condition, and can be inspected under power in our workshop. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, total length: 1,750 mm, total width: 800 mm, total height: 1,000 mm, overall weight: 60 kg, space requirement height: 1,000 mm, space requirement length: 1,750 mm, space requirement width: 800 mm, No. 3253 Edge banding machine Sudhoff V 30 Used For with hot melt adhesive pre-coated edges made of PVC, ABS, melamine or wood Workpiece thickness 10 - 55 mm Hodpox Il Ayofx Aa Esg Edge thickness 0.4 - 1.0 mm Automatic edge transport Automatic cutting of the rear edges Edge trimming for flush cutting Electromagnetic cutting station for the front edge Hot air blower with 3 kW power Heating infinitely variable Automatic belt feed 7 m/min Transport dimensions approx. 1750 x 800 x 1000 mm LWH Weight approx. 60 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2021, Efi Vutek H5 Hsdpfxjxanwzj Aa Eog Under service contract since installation in 2021. Configuration: 8 colors + w For extra 9.000€ extra we can include RIP Caldera V18 with driver and profiles and 100 liters of inks, 20 liters per colours CMYKW . (which costs 14.000€) Productivity: 109 boards per hour Under production. Price includes decommissioning and loading on truck. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used brochure production system, the ‘C.P. Bourg BBF2005 Perfect Binder’. Hjdpexzqa Uofx Aa Ejg Item for sale: 1 x Bourg BBF2005 suitable for various Xerox model families: iGen ColorPress Nuvera DocuTech Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH Hjdpfst H Rcaex Aa Eeg

Condition: used, total width: 1,100 mm, total height: 1,300 mm, total length: 1,200 mm, planing width: 630 mm, overall weight: 1,200 kg, planing height: 200 mm, space requirement height: 1,300 mm, space requirement length: 1,200 mm, space requirement width: 1,100 mm, No. 3249 Thickness planer Hombak D 63 Used Planing width 630 mm Planing height max. 200 mm 2-knife shaft Kickback protection Toothed infeed roller Smooth outfeed roller 2 feed speeds 9 / 18 m/min 2 height-adjustable rollers in the thicknessing table Knife setting gauge from Panhans Transport dimensions approx. 1200 x 1100 x 1300 mm LWH Weight approx. 1200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price Hsdpfox Ilzvsx Aa Eog To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: reconditioned (used), Year of construction: 2005, operating hours: 15,604 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, total width: 1,700 mm, total height: 2,400 mm, total length: 7,800 mm, input voltage: 400 V, input current: 64 A, overall weight: 12,500 kg, transport height: 2,400 mm, power: 30 kW (40.79 HP), year of last overhaul: 2024, volume flow: 160 m³/h, transport width: 1,700 mm, transport length: 7,800 mm, tank capacity: 600 l, Hello, We are offering you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B, subject to change. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Pressing force of main press 50 t Drive power 30 kW Total connected load 31.5 kW Hsdpfjuan Hzsx Aa Esg Rated current 64 A Throughput under operating conditions with a bulk weight of 60 kg/cbm approx. 6.7 t/hour Machine weight of press 12.5 t Note: The machine is currently in our workshop for overhaul and is expected to be tested and ready for sale in February. The machine documentation is available in German. A viewing of the press is possible by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Hodpevgrh Uofx Aa Esg Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, bale width: 100 mm, bale height: 800 mm, bale weight: 400 kg, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed 7,019 pieces Hjdpfx Aaet H Rgfo Ejg Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. Hsdpsv T I Evofx Aa Esg The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH