Used Broach for sale (198)

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,710 h, machine/vehicle number: -, Cold rolling line DEM MTO 760/2 Year 2013 Motor hours: 3710 Units and components: 1. SVV/2 twin vertical axis coil decoiler 2. RD 140/1 mechanical scale breaker 3. SA-CLR lubrication unit 4. MTO 760/2 2-block cold rolling machine Iiedpfx Aovduwmem Iea 5. BOM 1250 horizontal axis winder 6. Electrical cabinet 7. Operator control panel. We will answer any additional questions in writing.

Condition: new, Year of construction: 2026, Main advantages: - The CORMAK GOLIAT 660 x 4000 universal lathe can be used for many tasks, such as turning internal and external surfaces, cones, polishing, metric, inch modular and DP threading, drilling and broaching. - The solid cast iron bed construction ensures maximum vibration reduction. Additionally, the bed is hardened and precisely ground. The device bed is extremely resistant to twisting and does not vibrate, which is the basic condition for precise turning. - Central feed switching system, lead screw and feed shaft for threading - The digital readout works in (3) three axes of movement: longitudinal, transverse, upper slide. The processed electronic signal from the optical rulers visualizes the obtained values ​​from movements along the axes on the digital screen. - The lathe is equipped with a high-quality, reinforced spindle bearing system. Modern main spindle bearing with ball bearings - Optimal work results are ensured by a large spindle passage of 105 mm, a 4000 mm center spacing, a 3-jaw lathe chuck of 320 mm, and a powerful 7.5 kW engine. - The rapid longitudinal and transverse feed system significantly shortens the machining time and increases productivity. - Hardened and ground gears in the spindle gear - ensures long-term stability of work. - Equipped with a lead screw and a feed shaft for threading, automatic longitudinal and transverse feed. - Easy adjustment of the spindle speed and automatic feed from the ergonomic control panel on the gear. - Possibility of machining a wide range of threads without the need to replace the change wheels in the guitar. Wide range of threads: metric (22) 1 - 14 mm, inch (25) 2-28 T.P.I, modular (18) 0.5-7 M.P., D.P. thread (24) 4-56 D.P. Turning right and left threads. - Thread turning clock designed for accurate counting of turns. The function is to save time so that in several passes you can unscrew the lead screw nut to manually quickly return the support to its original position. - The bed has a replaceable bridge for turning larger elements, e.g. a disc. This lathe model allows for machining with a maximum diameter of 870 mm with the bridge removed. Technical data Max. turning diameter over bed Ø660 mm Iisdpfovw Abgex Am Ioa Max. turning diameter over support Ø420 mm Max. turning diameter in bridge slot Ø870 mm Slot length 240 mm Centre spacing 4000 mm Max. turning length 3950 mm Spindle bore Ø105 mm Spindle taper diameter and angle Ø113 mm 1:20 Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36-1600 rpm) Number and range of longitudinal feeds 65 (0.063-2.52 mm/rev.) Number and range of cross feeds 65 (0.027-1.07 mm/rev.) Metric thread 22 (1-14mm) Inch thread 25 (28-2 TPI-pitches per inch) Modular thread 18 (0.5-7mm) DP thread 24 (56-4 DP) Rapid longitudinal feed 4.5 m/min. Rapid cross feed 1.9 m/min. Lead screw pitch 12 mm Spindle axis distance from tool surface 28 mm Tool dimension 25x25 mm Max. top slide travel 145 mm Max. cross slide travel 380 mm Tailstock quill diameter 75 mm Tailstock taper MT5 Max. tailstock quill travel 150 mm Tailstock cross travel ±15 mm Main motor S1/S6 7.5/9 kW / 400V Rapid feed motor 250W Coolant pump 60W, 25 L/min. Dimensions L/W/H 5500 x 1100 x 1450 mm Weight 5 200 kg

Condition: new, Year of construction: 2026, This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching. This series lathes can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 80 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Equipped with a foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Technical data Swing over bed 460 mm Swing over cross slide 270 mm Swing over gap bridge 690 mm Turning length in gap bridge 165 mm Centres distance 1500 mm Bed inductively hardened Bed width 300 mm Spindle bore diameter 80 mm Spindle tip D1-8 Spindle mount MK7 Spindle speed (12) 25–1700 rpm Maximum tool dimensions 25×25 mm Longitudinal feed range (42) 0.031–1.7 mm/turn Transverse feed range (42) 0.014 – 0.784 mm/turn Metric thread (41) 0.1–14 mm Inch thread (60) 2–112 T.P.I. Modular thread 0.1–7 M.P (34) Iodpfxericzie Am Isia D.P. thread 4–112 D.P. (50) Tailstock quill diameter 60 mm Tailstock quill extension 130 mm Tailstock quill tip MK4 Digital readout in 3 axes Main motor power 5.5 kW Flood coolant pump power 0.1 kW Dimensions 2750×1080×1370 mm Net weight 1820 kg

Condition: new, Year of construction: 2026, Universal metal lathe CORMAK 330x700 with base, 230V is equipped with 12-speed gearbox with induction motor (constant speed) 1.1 kW/230V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling and broaching. Semi-professional model, used for single and low-volume production. Machine version with base. Machine description: Durable and stable construction, the bed is made of high quality cast iron. 12-speed gearbox with induction motor provides optimal rolling mode without loss of maximum torque. Induction hardened and precision ground bed guides. Appropriate bed width of 160 mm ensures stable and precise working conditions. Spindle shaft mounted by two angular contact bearings. 38 mm spindle bore for optimal work results, allowing the machining of large diameter shafts. Spindle motor induction (constant speed) 1.1 kW/230V drive with high power and high torque, optimal for machining steel, non-ferrous materials. Handwheel carriage with precise 0.5/0.1 mm scale (transverse/longitudinal feed). The tool slide with a scale, rotates in the range of ± 45°, and the tailstock has a sliding system of ± 10 mm for turning cones. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel to the gears. Hardened and ground wheels toothed in the spindle gearbox. Large threading range (Right and Left hand threading): Metric - (17) 0.5-4mm, Inch - (26) 9-40 TPI. With lead screw for threading or automatic longitudinal feed. Automatic Longitudinal Feed (2) 0.105 - 1.396 mm/rev, and Traverse (2) (0.022-0.296) mm/rev - reduces machining time and improves quality when turning long parts. The machine is fully compliantwith the requirements of EU directives (CE) and Polish regulations and DIN standards. with the requirements of EU directives (CE) and Polish regulations and DIN standards. Technical parameters 3-jaw chuck 160mm Max. turning diameter over bed 330mm Max. turning diameter over carriage 220mm Max. detail length in centers 700mm Max. length of the installed part 650mm Iiedpsmtyi Nsfx Am Ioa Bed width 160mm Spindle bore 38mm Spindle taper MK5 Dimensions of lathe post 75 x 75 x 20mm Top slide range 100 (0.05) mm Traverse range 150 (0.1)mm Longitudinal shift range 620(0.5)mm Spindle speeds (12) 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 rpm /min Number and range of metric threads (17) 0.5-4mm Number and range of inch threads (26) 9-40 TPI Longitudinal autofeed speed 0.105-1.396 mm/rev Auto traverse speeds 0.022-0.296mm/rev Tailstock liner diameter 40mm Trail distance of the tailstock liner 70 (0.025)mm Taper of Tailstock MK2 Engine power 1.1kW / 230V Dimensions L/W/H (with base) 1500 x 730 x 1200mm Weight (with stand) 320 kg Equipment: Lathe base 3-jaw chuck 160 mm Jaws left Fixed Tooth: MK3 Change wheels Lubricator Handle and holder wrench A set of maintenance tools CE safety guards Manual in Polish CE Declaration of Conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Machine for machining various internal and external surfaces, mainly keyways. Widely used in repair shops and tool shops, in single and small batch production. Machine for machining various internal and external surfaces, designed for precise work, especially grooves. It is widely used in overhaul shops and tool shops, both in unit and small batch production, making it a versatile tool for various industries. Iiedpfx Aouyhxmom Iea Main features of the machine: Hardened and ground guides: ensure maximum durability and precision, guaranteeing longevity and high quality machining. Tilting chisel head of +/- 30°: Allows flexibility in machining surfaces at different angles, increasing the versatility of the machine. Built-in lubrication system: Automatic lubrication of the workpieces, which reduces friction, increases machine life and minimises the need for manual maintenance. Adjustable stroke speed per minute - 6 settings: Allows the speed to be adjusted to suit the specific material and type of machining being carried out, improving accuracy and efficiency. This machine is ideal for both small batch production shops and those that need high precision when overhauling or reconditioning tools. Thanks to modern features such as the ability to adjust the speed, users can easily adapt the operation of the machine to their individual needs, increasing efficiency and saving time. Technical specifications Maximum stroke 125 mm Minimum number of strokes 60 / min. Maximum number of strokes 350 / min. Number of speed steps 6 Head rotation 90º Table dimension 500x200 mm Table travel X/Y 220 mm Z axis travel 200 mm Motor power 0.37 kW Overall dimensions 800 x 750 x 1550 mm Weight 290 kg Knife shank dimensions Ø 10 / Ø 16 mm or 16 mm square shank

Condition: new, Year of construction: 2026, One of our best-selling conventional lathes, this lathe can be used for many tasks such as turning internal and external surfaces as well as tapers, polishing, modular and DP threading, drilling and internal broaching. Machine features Lathes from this series can be used for many tasks such as turning internal and external surfaces, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 52 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Machining accuracy: circularity deviation below 0.01 mm, cylindricality deviation no more than 0.02 mm for 200 mm long measurement, perfect surface finish Equipped with a mechanical foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Optional VARIO model with a smooth spindle speed adjustment and a digital indicator Technical data Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap bridge 580 mm Turning length in gap bridge 190 mm Centres distance 1000 mm Centres height 205 mm Bed inductively hardened Bed width 250 mm Spindle bore diameter 52 mm Spindle tip D1-6 Spindle mount MK6 Spindle speed (16) 45–1800 rpm Maximum tool dimensions 20 mm×20 mm Longitudinal feed range (17) 0.05–1.7 mm/turn Transverse feed range (17) 0.025 – 0.85 mm/turn Metric thread (42) 0.2–14 mm Inch thread (45) 2–72 T.P.I. Modular thread 0.3–3.5 M.P (18) D.P. thread 8–44 D.P. (21) Tailstock quill diameter 50 mm Tailstock quill extension 120 mm Tailstock quill tip MK 4 Digital readout in 3 axes Main motor power (S1/S6) 2.2/3.3 kW Flood coolant pump power 0.1 kW Dimensions 1940×850×1320 mm Weight 1590 kg Default equipment 200 mm 3-jaw lathe chuck 250 mm 4-jaw lathe chuck 3 axes digital readout Face plate Steady rest Follow rest Spindle reducing sleeve Dead centre Change gears for the swing-frame of the gear train Cooling system Lighting installation Thread indicator (gauge) Lathe equipped with an electromechanical foot brake compliant with EC regulations Chips container Set of handling tools Protective guards compliant with the newest EC regulation Iedpfsiz Tf Sox Am Ieia User manual EC declaration of conformity Factory new machine under full warranty Factory new machine, under warranty For more information you can visit our web page.

Condition: new, Year of construction: 2026, Main Advantages of the CORMAK 660 × 2000 Universal Lathe Electromagnetic foot brake ensures maximum safety and significantly reduces downtime by allowing fast and reliable stopping of the machine. Rapid longitudinal and cross feeds considerably shorten tool travel time, increasing machining efficiency and operator comfort. Universal application – external and internal turning, taper turning, threading (metric, inch, module, DP), drilling, broaching, and polishing. Hardened and ground cast iron bed (400 mm wide) provides maximum vibration reduction and high machining accuracy. Iijdpfxsyk Dabo Am Ija Large spindle bore Ø105 mm and D1-8 camlock spindle nose enable machining of shafts and large-diameter components. High drive power – 7.5 / 9 kW spindle motor ensures stable performance during heavy-duty cutting operations. Wide threading range without changing change gears, saving time and increasing production flexibility. 3-axis Digital Readout (DRO) enhances precision of settings and overall turning process control. Standard Equipment 3-axis digital readout (DRO) 315 mm 3-jaw chuck 400 mm 4-jaw chuck 400 mm faceplate Fixed steady rest and traveling steady rest Cooling system and work light Polish user manual and CE declaration Optional Equipment Set of turning tools 25 × 25 mm – 7 pcs Precision live center MT5 Grinding attachment for shafts and bores Coolants and cutting oils Technical Specifications Swing over bed: Ø 660 mm Swing over cross slide: Ø 455 mm Swing in gap (diameter × width): 885 × 170 mm Center height: 330 mm Distance between centers: 2000 mm Bed width: 350 mm Maximum tool size: 25 × 25 mm Total cross slide travel: 355 mm Total compound slide travel: 130 mm Spindle bore: Ø 105 mm Spindle nose: D1-8 Spindle taper: Ø 113 mm (1:20) Number of spindle speeds: 12 Spindle speed range: 25–1500 rpm Leadscrew diameter and pitch: Ø 40 mm × 6 mm Inch thread range: 2–112 TPI (60 ranges) Metric thread range: 0.2–14 mm (47 ranges) DP threads: 4–112 DP (50 ranges) Module threads: 0.1–7 MP (39 ranges) Longitudinal feed: 0.059–1.646 mm/rev (35 ranges) Cross feed: 0.020–0.573 mm/rev (35 ranges) Tailstock quill travel: 180 mm Tailstock quill diameter: Ø 75 mm Tailstock taper: Morse taper No. 5 Main spindle motor: 7.5 kW (10 HP), 3-phase Coolant pump motor: 0.1 kW (1/8 HP) Required installation space (L × W × H): 334 × 115 × 151 cm Packing dimensions (L × W × H): 340 × 115 × 182 cm Weight: 3200 kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, AC motors for spindle speed and feed Chip conveyor Iijdpfx Ajxyghfem Isa No. 2 polygon milling/thread milling devices No. 1 broaching unit No. 1 threading unit No. 1 pick-up with retraction slide No. 1 deburring unit No. 1 rack milling device No. 2 wedge recesses No. 2 marking devices No. 1 carriage on 6th radial CNC axis (Siemens), with X and Z No. 2 sensors for length control of short, non-threaded or first of bar piece, with automatic discharge into bin at 4th and 8th station Giovanni Cucchi integrated bar feeder No. 1 bar elevator Tool holders

Condition: reconditioned (used), functionality: fully functional, cutting length (max.): 3,150 mm, ESPE HYDRAULIC guillotine shears model CNTA 16A/3150 FOR cutting sheet metal Iiodpeuq Eh Sofx Am Isa Output parameters of the machine: - maximum cutting length - 3150mm, - maximum thickness of cut sheet metal - 16mm, - table width - 160mm, - cutting angle - 0.5 - 2.5 degrees hydraulically adjustable, - working height of the table - 850mm, - beam drive and sheet metal pressure - hydraulic, - adjustable gap - electric drive, - adjustable depth (width) of cut - depending on the set angle, - main drive 30kW, - auxiliary drives 2.5kW, - adjustable numerically controlled bumper - AC servonap, - friendly and simple CNC numerical control - weight about 16500kg, CNC control: Control built on the basis of industrial automation components (from Delta Electronics) equipped with a touch-screen operator panel for setting work parameters: - setting the thickness of the material (automatic slot adjustment) - setting the knife working depth (cutting width - reducing time when cutting narrow details) - setting the position of the cut material bumper - setting the working angle of the knife - possibility to program a sequence of cuts up to 50 operations for one sheet (automatic change of depth setting, bumper setting, sheet thickness, knife angle setting, cutting width) after each cut. This makes it possible to cut the entire sheet in a preset sequence, without the need to constantly rearrange the sheets.

Condition: good (used), Hello, For sale: Slotting Machine type HOV-2S. The machine is operational and in continuous use; inspection and testing are possible. Isdpfxexyi Sao Am Ijia The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact from 7:00 to 16:00.

Condition: excellent (used), functionality: fully functional, Slotting machine Urpe model M-300 G of tilting head, Slotting of course of 0-300mm of travel, number of blows per minute 30-35-40, distance of the tool to the column 500mm, distance adjustable from the table to the ram 425 -585mm, max distance between tool and body 450mm, table surface 800x325mm, long table travel 550mm, rec transv 265mm, motor pot 5.5cv, estimated weight 1850kg, with Chuck Iodpevdknzefx Am Ieia

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 2,900 mm, total height: 1,500 mm, total width: 1,600 mm, type of input current: three-phase, For sale is a Maqford BEA2 forming machine. Working length 150-1500mm, sheet thickness max. 2.0mm, pipe diameter 120-600mm. Including a set of packages for individual diameters. Iisdpswmniaofx Am Ioa

Condition: new, Year of construction: 2026, Semi-professional CORMAK 330x915 universal lathe for metal is equipped with a 12-speed gearbox with an induction motor (constant speed) 1.1 kW/400V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks such as internal and external surface turning, tapers, polishing, metric and inch threading, drilling and broaching. Technical data: Max. turning diameter over bed: 325mm Max. installed part length (in tusks): 915 mm Max. length of installed part (turning chuck/center): 830mm Turning diameter over carriage: 208mm Iisdpfxjm Nb Sro Am Ija Bed width: 160mm spindle bore: 38mm Spindle taper: MK5 Turning post dimensions: 78 x 78 x 20mm Max. tool dimension: 16x16mm Top slide range: 100mm Longitudinal feed range: 153mm Longitudinal shift range: 800mm Spindle speeds: 12 spans (L/H) Spindle speed range: L: 65, 90, 120, 120, 160, 300 / H: 380, 500, 640, 850, 1100, 1650 rpm. Longitudinal feed range: 0.087-2.218 mm/rev Traversing range: 0.019-0.477mm/rev Spindle nose: MK5 Metric thread: (16) 0.25-6mm Inch thread: (24) 4-120 T.P.I. Tailstock liner diameter: 32mm Tailstock sleeve tip: MK3 Tailstock liner travel distance: 75mm Engine power: 1.1kW / 400V Pump size: 0.1kW Weight: 390 kg Dimensions: 1770x740x1600mm Equipment: Lathe base 2-axis digital readout (optical ruler) 160mm 3-jaw lathe chuck Jaws left Fixed Tooth: MK3 Change wheels Spindle reducer Cooling system Lubricator Handle and holder wrench A set of maintenance tools CE safety guards Manual in Polish CE Declaration of Conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Tool travel : 0-315 mm Strokes per minute : 14 - 60 Ram adjustment : 235 mm Swivel angle of head : ±45° Head to table distance : 510 mm Tool to column distance : 460 mm Diameter of rotating table : 450 mm Diameter of central hole of rotating table : 80 mm Number of fixed positions of rotating table : 24 Iiedpfx Asvfctfem Iea Longitudinal travel of worktable : 265 mm Transverse travel of worktable : 200 mm Self-breaking main motor : 4 kW / 5.5 h Weight : 1310 kg Overall dimensions : 1000 x 1500 x 2250 mm

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning Isdjfz A Ilspfx Am Ioia The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin Iedpfxjfzktzo Am Ijia By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design Isdefz I Ehepfx Am Ioia The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Ijdpfxofz A Iwj Am Ieia Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Iijdpfx Amefzciqe Iea Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: used, functionality: fully functional, Type: Hydraulic Guillotine Manufacturer: HJO, Sweden Year: 1984 Max. plate thickness 4 mm Max. plate length 2500 mm Max. operating pressure 21.0 MPa V 3 x 380 Ijdoxgcz Iepfx Am Ijia Hz 50 Weight 3700 kg Quick action blade clearance adjustment, floor pedal control.

Condition: excellent (used), Year of construction: 1989, machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Ijdpfx Asd R Ri Uom Ieia Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. Ijdex U Tr Ajpfx Am Ijia The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Stroke 500mm, 320mm and 200mm Iisdpfotz S Hcox Am Ija