Used Broach Reamer for sale (282)

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Make: FORST Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Ijdpfx Aajv Htluocotn Mach. No.: 20

Condition: good (used), Keyway broaching machine FRÖMAG RAPIDA 463 incl. indexing table and additional accessories - Achievable keyway widths: 3 - 63 mm - Maximum keyway length: 600 mm - Indexing table - For bores from 10-500 mm - Feed size: 0.01-0.25 mm - Cutting speed infinitely adjustable: 2-22 m/min - Return speed - constant: 50 m/min - Load capacity: 3000 kg Itedpfswr T S Dox Aacsn - Connected load: 4.6 kW - Incl. working platform - Various broaching needles and matching accessories in tool cabinet Dimensions: LxWxH (machine): 1.6x1.5x2.3 m / Weight: 3500 kg Errors and omissions excepted.

Condition: used, Year of construction: 1990, max.: tractive force 25.000 KG max.: tool length 3520 mm Iedpfx Ajcm Eiwjacjtn max.: cutting speed 9,6 m/min passage width 520 mm The machine has machined connecting rods and con rod caps. The machine is designed for mass production (output 400 pieces/hour).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, workpiece diameter (max.): 900 mm, stroke length: 2,000 mm, control type: PLC-controlled, TECHNICAL DETAILS General Data Towing force: max. 9 t Total power requirement: 25 kW MACHINE DETAILS Machine type: Electromechanically driven internal vertical broaching machine FSR Features: Designed bridge for use with standard broaching tool holders Drive: Ball screw drives and hardened, ground round guides with regulated three-phase motors for smooth operation Ijdpewx Ifxofx Aacjtn EQUIPMENT Feeds available Shim control available Sliding tables available Prepared for automation and integration into linked systems

Condition: good (used), Year of construction: 1991, Manufacturer: Urpe Type: M200G Year of construction: 1991 Stroke 0-200 mm Table 650 x 220 mm Tilting ram 0-30 deg. Specifications Metric US Standard Itjdpjwp Nfnofx Aacjn There are (as yet) no specifications for this machine. Dimensions (Estimate) There are (as yet) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations and contractual conditions. We recommend that you check all important details.

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle Iodpfx Aajwt N H Tocetn -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11622 J9 HSS M-2 -Keyway width: 22 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Year of construction: 2003, condition: ready for operation (used), Max. operating pressure: 70bar, hydraulic fluid filling quantity: 630l, with loading portal and sliding guide with carriage. Iedpfx Aelbmtcsacetn

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Itedpfx Asw Ighijacsn Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 25, workpiece diameter (max.): 40 mm, total length: 1,700 mm, total width: 2,400 mm, total height: 4,770 mm, cutting speed: 60,000 mm/min, TECHNICAL DETAILS Performance Data Maximum pulling force: 25 kN Maximum stroke: 1,000 mm Return stroke speed: 20 m/min Maximum shank diameter: 40 mm Clamping plate: 320 mm MACHINE DETAILS Machine weight: approx. 6,000 kg Ijdswx Ibmjpfx Aacjtn Control cabinet Weight: approx. 800 kg Total installed power: 24 kW Coolant system Net weight: approx. 1,300 kg Tank capacity: 630 l Hydraulic unit Net weight: approx. 2,000 kg Tank capacity: 800 l

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Itodpfx Aewpud Aeacen Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle Iodpfxowt N Hyj Aacjtn -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11518 18MM V -Keyway width: 18 mm -Quantity: 1 piece available -Dimensions box: 395/40/H40 mm -Weight: 1.3 kg

Condition: used, Year of construction: 1990, machine/vehicle number: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outside broaching tractive force: 25.000kg cutting speed: 7,2 / 8,1 / 9,6m/min maximum tool length: 3520mm passage width: 520mm clamping area of the tool carrier: 3520 x 460 mm dimension: 12.300 x 6.400 x 4650mm power supply: 380V 50Hz / 110kW Itedpfx Aajinim Tecjn Accessories/ special equipment: - 6 tool carriers for tool change - machine documentation Remark / General The machines are in a good condition. The machines are dismantled and stored in our warehouse. The total volume of the plant is several trucks (approx. 70to per machine). The machines have produced connecting rods for passenger car diesel engines. Chain broaching machines are designed for mass production. The continuous (backstroke-free) working process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a backstroke of the tools or workpieces. In chain broaching, the workpiece is continuously moved past the tool and thus performs the feed movement. and thus carries out the feed motion. This unique broaching process is only used for very large quantities in series production.

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11620 J9 HSS M-2 -Keyway width: 20 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg Ijdowt N E Aepfx Aacjtn

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Itjdpfxsw H Dgne Aacsn Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: used, Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set Ijdpoiay Hhjfx Aacotn -Reamers: machine reamers 36 pieces -Mount: Ø 16/22 mm -Diameter: 31.75 to 55 mm, see photo parts list -Transport dimension.: 240/230/H80 mm -Total weight: 18.5 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Overhaul Due: 04/2025 by Wiemers AG General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Iodow Huh Nspfx Aacetn Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.

Condition: used, Multi-wedge broach, hexagonal broaching tool, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool, slotting broach -Manufacturer: SWZ, broach, impact broach -Type: SW 19 1TGL 29-16600/02 20/50 HSS -Item no.: 440 0432 08 102 04708 -Width: Hexagonal 19 mm wrench width, see photos Iodsitt R Sspfx Aacetn -Quantity: 1 piece available -Total dimensions: 950/22/22 mm -Weight: 1.7kg

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 480 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 100 mm/s, workpiece diameter (max.): 800 mm, total height: 1,680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Tensile force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / Working area: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching arbors "System Rausch" Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced draw bridge made from tool steel for higher tensile forces - Safety door with door interlock, safety interrogation and safety monitoring - Easily removable chip chute with tool extraction protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective covers for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via the swivel system - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labelling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical preparation for external control element (16-pin connector) - Provision for automatic clamping jaw opening during profile broaching with roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool extraction during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical operating unit for broaching and return stroke, as well as emergency stop functionality Note: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably. General information: The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks) The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways. Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings. Itsdpsw D E Twofx Aacsn Suitable broaching tools and arbors for the machine are available on request.

Condition: used, Machine reamers, reamer, reaming tool, fitting knife cutting set -Machine reamer: Shell reamer with holder -Diameter: Ø 26 mm Itsdpfxoucahve Aacen -Shaft diameter: Ø 16 mm -Total dimensions: Ø 25 x 120 mm -Weight: 0.3 kg

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle Itodpfx Aasitt Rgjcsn -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKO -Width: square 22 mm / see photos -Quantity: 2 pieces available -Price per piece -Dimensions total: 920/22/22 mm -Weight: 2.5 kg/piece

Condition: used, Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Reamers: machine reamers 25 pieces -Intake: Ø 16/19/20/22 mm -Diameter: 28.5 to 53 mm, see photo parts list Isdpoiay Haofx Aacetn -Transport dimension.: 240/230/H100 mm -Total weight: 9.8 kg

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKC -Width: Square 22 mm -Quantity: 3 pieces available -Price per piece -Total dimensions: Ø 22 x 925 mm Itodpfx Aajitt R Iecen -Weight: 2.1 kg/piece

Condition: used, Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Reamers: machine reamers 20 pieces -Mount: Ø 16/22 mm Itedsiay E Dopfx Aacsn -Diameter: 31.5 to 54.5 mm, see photo parts list -Transport dimension.: 230/210/H80 mm -Total weight: 9.4 kg

Condition: used, Square broaching tool, multi-wedge broaching needle, broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Width: Square 17 mm wrench size, see photos -Type: unfortunately no longer readable -Size: see photos -Quantity: 1 piece available -Total dimensions: Ø 19 x 955 mm Itjdpfx Aaekkzymjcon -Weight: 1.3kg

Condition: used, Multi-wedge broach, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool -Quantity: 2x tools available -Price: complete 2 pieces -1x tool: Ø 16 0.056 Itsdpfx Asb A I Upjacen -1x tool: Ø 15.75 x 16Ø S8 -Weight: 2kg