Used Broach Reamer for sale (279)

Condition: used, BROACHING MACHINE Kwodpfx Ajt Hr Dfedtet

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Kedportrzlofx Adtswt Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 #

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Workingpiece thickness from to 8-60 mm Total length 3960 mm Kwjdpfex I Sgrjx Adtjt Feed speed 10 m/min. Weight 1055 kg

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and Technical Data: - Base machine: Streamer 1057XL 200-400 V / 50 Hz, with manual pressure bridge adjustment - Extendable XL workpiece support: spacing 600 mm - Jointing milling unit: FG201 with 2 cutterheads for trimming panel edges - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System Ksdpfjx Twh Ejx Adtewt - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System - Edge feeding unit: 1903, automatic transport for roll and strip material - Glue application system: Glu Jet GJ301 2.3 kW / 50 Hz, automatic glue height adjustment (contact nozzle) - Automatic reloading function - Pressure unit: 1912-3, pneumatic, first roller driven, with pneumatic plunge control - End trimming unit: 1918, 60 mm, pneumatic, angular trimming 0-10 degrees, pneumatic adjustment - Extraction hoods: for end trimming unit 1918 - Multifunctional milling unit: FR 201, for flush, radius, and profile milling, including DIA cutters - Corner copying unit: 1832, 1 x 0.35 kW / 200 Hz / 12,000 rpm, corner copying for edge thickness up to 3 mm - Diamond cutter: Diameter 53 x 10 x 16 mm, Z = 3, R = 2 mm, CM technology (Leuco system), integrated chip extraction, for profile milling unit 1832 - Scraper unit: 1929 - Complete chip box: Diameter 120 mm, for 1929 + 1964 + FK70 - HW reversible knives: for scraper holder R = 2.0 mm, 2 pcs required - Surface scraper: FK 701 for removing excess glue for a clean glue joint - Spray device: TR 201 for infeed and outfeed areas - Buffing unit: 1940, 2 x 0.09 kW / 50-60 Hz / 1,400 rpm, for finishing and polishing edges, with 2 textile discs, tiltable 0-5 degrees - Minimum workpiece length: 160 mm - Workpiece thickness: 6-45 / 60 mm - Edge thickness: 0.4-3 / 6 mm - Feed speed: 10 m/min Length: 4,630 mm Weight: approx. 1,440 kg Availability: short notice Location: 65439 Flörsheim

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, feed rate X-axis: 10 m/min, overall weight: 1,200 kg, workpiece length (max.): 250 mm, workpiece width (max.): 65 mm, TECHNICAL DETAILS Kjdsx Rbm Hepfx Adtowt Edge band thickness min.: 3 mm Edge band thickness max.: 6 mm Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 65 mm Panel width max.: 65 mm Panel length min.: 160 mm Panel length max.: 250 mm Feed speed min.: 10 m/min Feed speed max.: 10 m/min MACHINE SPECIFICATIONS Dimensions & Weight Dimensions (L x W x H): 4,630 x 1,600 x 1,770 mm Weight: 1,200 kg Number of transport packages: 1 piece Voltage: 400 V Power consumption: 29.37 A Fuse protection: 35 A EQUIPMENT Pre-milling unit - Type: FG 201 - tools included Glue application unit - Type: 1903 Pressure rollers - Type: 1812 - tools included End trimming unit - Type: 1918 - tools included Rough trimming unit - Type: FR201 - tools included Corner rounding unit - Type: 1832 - tools included Radius scraping unit - Type: 1964 - tools included

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Ksdsx Ux U Aopfx Adtowt Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge banding height: 45 mm Kwjdpfx Aexf H Rdodtjt Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: good (used), Edgebander Holzher Streamer 1057 Pre-milling cutters Glue application, GLUE JET cartridge system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Kwodpsxzfhmsfx Adtjt Final trimming saws adjustable at an angle Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge height mm: 60 Max edge thickness in roll mm: 3 Feed speed 10m/min Comes with fluids Polishing unit

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Kwedpfx Adew R Hirstot Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Long infeed fence 1252 mm Jointing milling unit with 2 motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) Kwsdpfew I Uytsx Adtst GluJet collection container Pressure unit 1912-3 pneumatic Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short notice

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Kodpfew I U Rfjx Adtewt Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Kwedpfx Aoxu E Nwodtst Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment Kwedpfsxqa Iyex Adtot High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° angle of the miter saws milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° corner copying unit - 3 mm edge thickness scraping unit for chamfers and radii with 2 scraping blade holders surface scraping unit - finish spraying device - PU machine with all processing tools machine is WORKSHOP TESTED in TOP CONDITION

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 280/1-501 15506069, No reserve price - guaranteed sale at the highest bid! Bidding obligates the buyer to pick up the item by May 26, 2025. Standard equipment according to manufacturer - no guarantee TECHNICAL DETAILS Min. workpiece length: 160 mm Min. workpiece width: 65 mm Workpiece thickness: 8 – 45 mm Edge width: 0.4 – 3 mm Feed speed: 10 m/min Feed system: Single conveyor for wound edge strips or strips Pre-milling unit Milling feed: 45 mm Glue application Glue system: Glu Jet S Glue type: EVA and PUR adhesive (single-cartridge system with glue stick) Pressure system Number of pressure rollers: 3 Kwjdpfx Adjwkp S Detet Trimming Trimming motors: Single motor system 45 mm Cutting cut Cutting unit: Multifunctional unit Corner rounding Corner rounding: 60 mm Scraper Scraper: Mechanical including chip extraction Surface scraper Surface scraper: Mechanical, with chip collector MACHINE DETAILS Overall length: 4,930 mm Width × Height: 1,600 × 1,774 mm Weight: 1,400 kg

Condition: good (used), Year of construction: 1956, Slotting machine, slotting machine, quick planer, keyseating machine, slotting machine, slotting machine, slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, schepping -Manufacturer: Elliott, horizontal shaping machine type 24M SHAPER -Stroke: 610mm -Stroke rate: 8 - 74 1/min -Clamping table: 580 x 330 mm Ksdpfxjh Nvy Es Adtswt -Travel: X/Y/Z 375/755/292 mm -T-Slot: 20mm -Drive: 3.7 kW -Dimensions: 2080/1120/H1550 mm -Weight: 1520 kg

Condition: used, Year of construction: 1964, serial number 23046 stroke 320 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Kwsdpfjfgpdrjx Adtst +++++

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment Ksdpfx Aoyap Uijdtowt • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 • Cable (unspecified) — qty 2 • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4

Condition: used, Year of construction: 1989, stroke 600 mm Kwedpfew Sykfex Adtet hydraulic ja keins dabei weight 3,7 t

Condition: good (used), max. ram stroke 400 mm throat 900 mm table diameter 1000 mm ram adjustment 1000 mm ram swivable +/- 12° longitudinal adjustment 950 mm cross adjustment 750 no. of strokes 11 - 60 Hub/min table diameter 1000 mm table load 4 t Kedpfx Aeya Iiljdtowt total power requirement 12 kW weight of the machine ca. 8,2 t dimensions of the machine ca. 3,4 x 2,2 x 3,1 m

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Kwodswwkx Ejpfx Adtst Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 turning speeds 50 - 12000 U/min no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Kjdpov S Irtjfx Adtowt Equipment: - Chip conveyor - 30-position tool changer - Heidenhain CNC control iTNC 530i - High-pressure belt filter system - IKZ 15 bar - SK40 mounts - Operating instructions The following repairs were carried out in 07/2022: - X-axis guide carriage - Various pneumatic hoses - Safety glass on loading doors - Various push buttons with indicator lights - Door safety switches - X-axis cover (slats) - IKZ filters (4 pieces) - Filter cabinet - Z+Y-axis toothed belts - Door scrapers with dampers - Hose for external cooling, spindle cooling, and spray guns (2 guns) - Set of coolant nozzles for external cooling - 2x falcon bars for the Y-axis - 1x set of door rollers with rail (6 meters) - 1x Klüber grease with cone reamer

Condition: new, pressure 5,0 t throat 215 mm workpiece height max. 445 mm Mandrel diameter 50 x 50 x 645 mm table plate Ø 275 mm total power requirement manuell kW weight of the machine ca. 160 kg. dimensions of the machine ca. 370 x 550 x 810 mm Description : - for pressing in and out of bearings, bushings, ... Kodpfx Adjxabxfjtjwt - the basic body of the model DP 5 made of high-quality gray cast iron - Includes mounting holes, ideal for mounting on a workbench - suitable for bushing, straightening, bending, broaching, ... - variably adjustable lever bar, depending on the required effort - ideal for repair shops and the general workshop area

Condition: good (used), Reamer, twist drill, drill bit Kjdpfxjx R Sz Ij Adtewt -Twist drill: Ø 75 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Dimensions: Ø 75 x 600 mm -Weight: 8.6 kg

Condition: used, Attachment holder, standard holder and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming blades, Sassex reamers, Sassex holders, tool holders, holders for drill bits, twist drills -Manufacturer: WMW SWZ, tool holder Kedpfx Adju Tlgrjtjwt -Recording: MK6 -Length: 345 mm -Dimensions: see photos -Dimensions: 620/100/63 mm -Weight: 10.1 kg

Condition: good (used), Reamer, twist drill, drill bit Kwjdpsu Tlhisfx Adtet -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg