Used Briquetting for sale (170)

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Bledpfov Rpxlox Aa Usd Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: excellent (used), Year of construction: 2001, Briquetting press for metal chips or granules was only tried on a trial basis hardly run Bljdpfx Aajfb T Hus Usd 20 hours of operation 2000 kg/cm2

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 90088200, total width: 5,000 mm, total height: 2,000 mm, total length: 6,000 mm, briquette diameter: 120 mm, overall weight: 22,000 kg, input voltage: 400 V, pressing force: 300 t, screw conveyor length: 10,000 mm, year of last overhaul: 2024, Equipment: emergency stop, ArnoBrik Briquetting Machine for Metal Materials Technical Data Main Dimensions Length x Width x Height: 6,000 mm / 19.6 ft x 5,000 mm / 16.4 ft x 2,000 mm / 6.56 ft Weight: 22 tonnes / 21.6 tons Functional Data Main Cylinder Force: 4,000 kN / 403 tons Cycle Time: 10 sec Throughput per hour: - Aluminium: 1.5 – 1.9 t/h (1.6/1.5 – 1.9/1.86 tons/h) - Steel / Grey Cast Iron: 2.7 – 2.9 t/h - Steel Powder: 1.67 – 2.0 t/h (1.7/1.67 – 2.0/1.96 tons/h) - Tyre Wire: 2.3 – 2.8 t/h (2.62 – 2.75 tons/h) Briquette Diameter: 120 – 130 mm (4.7 – 5.1 inch) Briquette Height: 110 – 120 mm (4.3 – 4.7 inch) Briquette Weight (depending on material): 3.0 – 12.0 kg (6.61 – 26.45 lbs) Hydraulic Equipment Number of Pumps: 3 Power Requirement per Pump: 37 kW / 49 HP Working Pressure: 300 bar / 4,351 psi Hydraulic Oil Tank: 2,200 l / 581 US gallons Electrical Equipment Total Power Requirement: 127 kW / 170 HP Drive Power: 3 x 37 kW / 49 HP Control Voltage: 24 V DC Operating Voltage: 400 V, 50 Hz Bljdpfx Aaeygu Nxo Ued

Condition: new, Year of construction: 2023, functionality: fully functional, total width: 1,800 mm, total height: 2,000 mm, total length: 1,600 mm, overall weight: 3,000 kg, This is a new brand new machine available immediately. Blodpfxjukfvpe Aa Ujd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x1800x1900 mm Blodpfx Aaovz Ex Ne Ujd Weight 3000 kg Total power requirement 33,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1850x1500x1230 mm Weight 870 kg Bodpfjvz Eqlsx Aa Ujld Total power requirement 8 kw

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 355, total width: 1,100 mm, total height: 1,000 mm, total length: 2,800 mm, briquette diameter: 60 mm, overall weight: 2,400 kg, warranty duration: 3 months, control cabinet width: 1,000 mm, control cabinet length: 1,000 mm, control cabinet height: 300 mm, type of input current: three-phase, The subject of the auction is a BT-60 briquetting press designed for processing sawdust, straw, and other materials. - Briquette output: 500 to 750 kg/h, briquette diameter: 60 mm. Other dimensions (depending on the production set used) - Briquette diameters: 36-40 mm, 46-50 mm, 56-60 mm Bodpfxsv Scxzj Aa Usld - Briquette shapes: Cube 48x48 - 55x55 - 59x59 mm. - Warranty: 3 months from the manufacturer. Wektor is a manufacturer of equipment for briquette and pellet production. We have been manufacturing briquetting machines for over 30 years.

Condition: new, Year of construction: 2025, THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips produced in the wood processing industry. The briquetting process can generate additional revenue and reduce storage and transportation costs. Another advantage is the flexibility of our wood briquetting presses. You can press different material grains into high-quality briquettes without any binding agents. As a valuable source of energy, RUF briquettes therefore have a higher utility value and an optimum CO2 balance. Our LIGNUM series also shines thanks to the innovative RUF hydraulics with high energy efficiency and low wear. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life - Low maintenance costs - Compact design - Direct integration into existing production systems possible Bledjq Rut Tspfx Aa Ued - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquettes - Without binder - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM CLASSIC Max. throughput of wood (kg/h) 410 Motor power (kW) 30 Max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.1 x 1.9 x 2.0 Approx. weight (t) 3.3 t Availability/delivery time after consultation

Condition: new, Year of construction: 2025, BRIQUETTING WOOD CHIPS AND GENERATING MORE REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way - without the use of binding agents. The briquetting process allows you to achieve higher yields while reducing transportation and storage costs. Our robust wood briquetting presses from the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. Bjdeq Ruvvjpfx Aa Usld YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - More revenue for briquettes - Without binding agent - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM R4 Max. throughput of wood (kg/h) 590 Motor power (kW) 30 max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.9 x 2.1 x 2.1 Approx. weight (t) 4.1 t Availability/delivery time after consultation

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator Blodpfx Aoupwx Hsa Ued - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: excellent (used), The briquetting press has been fully refurbished by the manufacturer. Technical specifications: Briquette diameter: 70 mm Hopper diameter: 1200 mm Maximum briquette length: 70 mm Throughput: ~70 kg/h Power supply: 400 V Motor power: 11 kW Bodpfx Aastianfe Ueld Overall dimensions: Length: 2100 mm Height: 1600 mm

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Bledpfxjxzqmze Aa Ujd Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Height: 1500 mm

Condition: used, Technical data: Briquette diameter: 70 mm Briquette length: 70 mm Hopper diameter: 1200 mm Hopper height: 1000 mm Hopper capacity: 1.13 m³ Throughput: 70–120 kg/h Bedpfx Aaoxxxawo Ueld Power supply: 400 V Motor power: 11 kW Safety switch

Year of construction: 2023, condition: like new (used), functionality: fully functional, Complete briquetting press line for the production of charcoal, mixing, and briquetting of various sludges! The plant includes a DOUBLE CRUSHING PRESS MOLDING MACHINE, mixer (paddle mixer), CIRCULAR COAL SIZING BLADE SYSTEM Q180*25MM, belt conveyor (6000x5500 mm, 8mm rubber belt, speed adjustment), 2x Q HELICAL CARRIER, conveyor belt 500x4000 mm, coal crusher group system (A GROUP SYSTEM), and coal drying oven. The complete electrical system for each unit is present and functions flawlessly. The plant is in like-new condition and ready for immediate operation. Bedpjw Nh Adefx Aa Ueld

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, briquette diameter: 60 mm, Refurbished machine suitable for smaller, single-shift carpentry operations. It offers a robust construction while providing solid performance. Maximum briquette output: 70 kg/h. Year of manufacture: 2003. In very good and well-maintained condition. Original warranty and post-warranty service available directly from our company. Professional PRODECO hydraulic briquetting presses are ideal for small and medium-sized woodworking operations. They enable efficient processing of waste into environmentally clean, high-calorific fuel without the need for binders. These machines are characterized by compact space requirements, low energy consumption, and easy operation. Bsdpfxjvva Rps Aa Usld Technical specifications: - Motor power: 5.5 kW - Briquette output: 35 to 70 kg/h (depending on material) - Briquette diameter: 60 mm - Briquette stroke length up to 60 mm (so-called endless briquette) - Hopper diameter: 1000 mm - Weight: 650 kg - Machine dimensions: 1170 x 1700 x 1510 mm Features: - Hydraulic unit with 7 pressing cycles/min - Dual manometer for improved pressure monitoring - Level sensor for the height of briquetted material - Oil level sensor - Inspection window - CE safety standard compliant - Moisture content of processed material must not exceed 18% The machine is refurbished, calibrated, and tested.

Condition: used, Year of construction: 1997, operating hours: 6,031 h, total width: 1,200 mm, total height: 1,520 mm, total length: 1,600 mm, briquette diameter: 60 mm, overall weight: 850 kg, type of input current: three-phase, power: 5.5 kW (7.48 HP), Good morning, Bjdpfxoq U Dcis Aa Usld We offer for sale a hydraulic sawdust briquetting machine from the renowned Italian company PRODECO model M60. Below is some useful information about the machine: * briquette diameter 60 mm * 5.5 kW motor * mileage 6,031 mh * hopper with a capacity of about 750 l * capacity about 50-90 kg, depending on the type of sawdust * machine with a controller to set the parameters of work and squeeze depending on the type of sawdust. * possibility of working in manual or automatic mode ( sawdust presence sensor in the tank ) * 1997 year of production * weight 850 kg * overall dimensions 120 x 160 x 520cm ( W x L x H ). The machine belongs to my customer at the request of which I sell it. The briquetting machine has undergone a basic inspection in our company, the oil has been changed and for the moment it is operational.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, engine power 11 kW Bjdpfx Asydvytea Ueld screw conveyor hydraulic unit mini silo production capacity from 70 to 100 kg/h briquette diameter 70 mm STULZ cooling unit ensuring stable temperature of the hydraulic system during continuous operation CE marking year of manufacture 2020

Year of construction: 2019, condition: used, functionality: fully functional, COMPLETE RUF 800 BRIQUETTING LINE + PACKAGING + PALLETIZING ABB – FOR SALE AS A WHOLE For sale: a complete, industrial, fully automated line for the production of wood briquettes (sawdust briquettes) including packaging system, palletizing, and pallet storage. This line is designed for use in a woodworking facility/briquette plant, providing comprehensive process handling: Briquetting → Packaging → Palletizing → Pallet wrapping → Storage. Sale only as a complete package (no sale of individual components). SET / LINE COMPONENTS 1) Briquetting presses – 4 units. • 4 × MALISZ RUF 800 briquetting presses • 2 units manufactured in 2014 • 2 units manufactured in 2016 • Application: industrial briquetting of sawdust / wood biomass • Usage: production of briquettes for wholesale and export 2) Packaging line • MALISZ AVA 722/3L – year of manufacture: 2015 • Purpose: automatic packaging of briquettes after production in shrink film and automatic label application. Packs of 10 kg each. 3) Automatic palletizing + wrapping • EUTO palletizer Bledjygcz Aepfx Aa Usd • Robot: ABB IRB 460-110 • Dual-cell system • Integrated scale for briquette weight and quality control • Film wrapper: ROBOPACK MASTERPLAT PGS – year 2019 • Function: stacking briquette packs on pallets + preparing pallets for transport 4) Pallet storage • RUF roller storage for briquette pallets – 56 m • Purpose: transport and buffering of finished pallets within the facility 509,200 EUR – price for the complete line (full set) Sale only as a whole – individual elements are not sold separately. ADDITIONAL INFORMATION • Industrial line – complete briquette plant equipment • Inspection possible by prior arrangement • Possibility of assistance with dismantling and loading (to be agreed) Location: Czudec, Poland The offered equipment/machine is sold on EXW (PL – 38-120 Czudec) Incoterms 2020 terms. Please contact by phone (preferably via WhatsApp).

Condition: used, Year of construction: 2013, For sale: MALISZ RUF 400 briquetting press / briquette machine We offer for sale a MALISZ RUF 400 briquetting press, year of manufacture 08/2013. The machine is in good condition and has been used occasionally. It was working in a woodworking production environment and is suitable for briquetting hardwood sawdust. Technical data (from nameplate): • Manufacturer: MALISZ Maschinenbau (Germany) • Type: RUF 400 • Machine No.: 2131 • Year: 08/2013 • Voltage: 400 V • Frequency: 50 Hz • Current: 58 A • Protection class: IP54 Included in the offer: • Briquetting press (machine only) • Full documentation available • Regularly serviced Bodpfsygcvmex Aa Uold Location: Czudec, Poland Incoterms: EXW (PL – 38-120 Czudec) according to Incoterms 2020 Price: 50,000 EUR For more details, photos or to arrange an inspection, please contact us.

Condition: excellent (used), functionality: fully functional, total width: 1,315 mm, total height: 1,410 mm, total length: 2,030 mm, briquette diameter: 40 mm, oil tank capacity: 100 l, screw conveyor length: 1,595 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, filling opening width: 1,044 mm, Machine fully working , in very good condition.If you need any details please let us know. Bledpfxjx I Abae Aa Usd

Condition: good (used), Good, used condition Main motor: 11 kW Maximum throughput: 200 kg/h Year of manufacture: 12/2008 / Technically tested: 01/2025 Bjdpjt Hxudjfx Aa Uold Briquettes: 150x60 mm . *Used machine, purchased as is Functional guarantee upon delivery

Condition: as good as new (ex-display), Year of construction: 2022, Briquetting press for aluminium or steel chips Extremely high pressing force of 3,700 kg/cm² Large storage silo Briquette size: 60 x 40 mm Throughput: Aluminium chips – up to approx. 70 kg/h Steel chips – up to approx. 100 kg/h Brass chips – up to approx. 100 kg/h *depending on feedstock Bljdpfsw Ig Suex Aa Ujd Included: - Emulsion tray - Emulsion pump - Oil cooler

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: Blodpfsd N Dnhex Aa Uod - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Bedpjd Su Hxofx Aa Ueld Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Bledpjffh Atsfx Aa Usd Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result