Used Briquette for sale (155)

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Gksdpfx Acefmqq Esmod Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds Gkodpsgwa Ursfx Acmsd 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Briquetting is a great cost-saving measure for companies. Further improvement of the efficiency and quality of packing pays off. BMD-800B is fit for a wide range of shrink wrapping with single or multi-row products. Automated alignment and placement feature improves the production efficiency and allows for the product to operate 24/7. When paired with UMPT briquette presses & our transportation table, this machine can support up to 4 BPA600A presses and produce up to 5 bags of briquettes per minute. After packaged in high-quality polyethene film the products have a compact and neat appearance which ensures the items’ integrity, the convenience of transportation and resistance to humidity. In contrast, currently widely used pre-made briquette bags have the disadvantage of unnecessary movement of briquettes inside the package which in turn disintegrate during logistics and lose value in the eyes of the end-consumer. Using shrink wrapping tightens the pack making it easier and safer to handle, increases resistance to humidity and even allows briquettes to be stored out in the elements. Stick-on carry handles are optional to provide the ultimate briquette pack. Features: Automated quality control and recycling of rejected briquettes Automated de-dusting Automated alignment and packing Automated leaflet insertion Automated sealing and heat shrinking of packages Automated palletizing and pallet wrapping The system ensures proper briquette dedusting, weighting (optional), alignment, packing and shrinking of the package. Automated sealers ensure a proper seal on each package eliminating the human factor while automated palletizing attachments load and wrap the pallets. Technical data Sealing type Sleeve Packing capacity ᐸ5 packs/min Shrinking Tunnel speed Variable, ≤15 m/min Godpfx Acefh R Uzsmekd Working height 780-850mm Shrinking Tunnel size Depends on the size of the product Sealing knife width 880mm Air pressure ≤0.5MPa (5 bar) Power supply 380V/50-60Hz/Trifazis Rated power consumption ≤30 kW Film type Polyethene (PE) Max film size 850mm (width) x 280mm (outer diameter)

Condition: new, - NEW -Kanuk® OriginalHot air ovenNominal heat output: 15.4 kWDimensions: 80 x 58 x 95 cmheatable room volume: 450 m³Efficiency: 83.4%Log length: 48 cmFlue pipe connection: 160 mmTotal power (kW): 15.4Dimensions H x W x D (cm): 80/58/95Space heating capacity (m³): 450Flue pipe connection (mm): 160Flue pipe connection: top / rear viewing window (cm): 28 x 15Efficiency (%): 83.3Weight (kg): 148Exhaust temperature (° C): 216Log length (cm): 48Wood consumption (kg / h): 3.9Exhaust gas mass flow (g / s): 14.28Minimum chimney draft (Pa): 16Exhaust throttle valve: ing chamber H x W x D (cm): 40 x 44 x 49.5Ash box: e 1 (self-closing door): OptionalWindow flushing: YesBimSchV Level 2: YesLogs, wood briquettes: YesDIN EN number: 13240Brown coal briquette: No AT §15a B-VG Norm: YesPrimary, secondary, tertiary air: yesCE mark: YesOutside air connection (mm): 100LRVSwitzerland: yesNo. 2100102 Gkodpfovwf Rksx Acmsd

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Gsdpjyr Tpnefx Acmjkd

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Gedpfx Asxfwdjcmskd Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Year of construction: 1999, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Gksdpfx Acei Hblmsmjd Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope: Hosokawa Alpine Pharmapaktor APC L 200/50, including feeding, without Flake Crusher.

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Gsdpfx Asfk N Tpjcmokd

Condition: new, Year of construction: 2026, THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips produced in the wood processing industry. The briquetting process can generate additional revenue and reduce storage and transportation costs. Another advantage is the flexibility of our wood briquetting presses. You can press different material grains into high-quality briquettes without any binding agents. As a valuable source of energy, RUF briquettes therefore have a higher utility value and an optimum CO2 balance. Our LIGNUM series also shines thanks to the innovative RUF hydraulics with high energy efficiency and low wear. Gksdpfx Ajq Rut Tjcmod YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life - Low maintenance costs - Compact design - Direct integration into existing production systems possible - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquettes - Without binder - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM CLASSIC Max. throughput of wood (kg/h) 410 Motor power (kW) 30 Max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.1 x 1.9 x 2.0 Approx. weight (t) 3.3 t Availability/delivery time after consultation

Condition: new, Year of construction: 2026, BRIQUETTING WOOD CHIPS AND GENERATING MORE REVENUE Gkjdpsq Ruvvsfx Acmed With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way - without the use of binding agents. The briquetting process allows you to achieve higher yields while reducing transportation and storage costs. Our robust wood briquetting presses from the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - More revenue for briquettes - Without binding agent - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM R4 Max. throughput of wood (kg/h) 590 Motor power (kW) 30 max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.9 x 2.1 x 2.1 Approx. weight (t) 4.1 t Availability/delivery time after consultation

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Gjdpfx Aj E Dquecmskd Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: Gkjdpsd Nm Siefx Acmod + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons Gkededfc Ikopfx Acmed 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, - NEW -without side panel and without baseKanuk® Originalwarm air stove- combustion chamber opening H x W (cm): 31 x 31- flue pipe connection:top / rear- efficiency (%): 83.9- log length (cm): 48- minimum flue draught (Pa): 16- ash box: no- BimSchV stage 2: yes- lignite briquette: no- CE mark: Yes- Total power (kW): 17,7- Room heating capacity (m³): 540- Viewing pane (cm): 24 x 14- Weight (kg): 153- Wood consumption (kg/h): 4,2- Flue gas throttle: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 80 mm- Dimensions H x W x D (cm): 80 / 58 / 95- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 232- Flue gas mass flow (g/s): 14.28- Combustion chamber H x W x D (cm): 40 x 44 x 49.5- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100108 Gkjdpfevyd Awjx Acmed

Condition: new, The clean air dust extractors of the R160 series are used in trade and industry. They can be connected to individual machines, machining centers or via pipelines to multiple extraction points. The mobile clean air dust extractors impress with their high extraction performance while requiring little space. Advantages and features: - Version with bag filters can also be shaken off during operation. - Long service life thanks to bag filters - even with fine dust such as grinding dust - Direct connection to briquette press possible - Machine meets all common requirements (Category C, Bia certificate, residual dust content H3 < 0.1mg/m³) and can therefore be used in businesses without hesitation - High quality: Made in Germany Technical data: nominal volume flow: 1850 m³/h extruction nozzle: 160 mm Gedpfx Ajvrv Ezecmokd low pressure V/min: 2550 PA motor rated-power: 2,2 kW chip collection volume: 280 l max. noise level: 73 dB(A) weight: 185 kg filter area: 8,25 m² of surface treated polyester needled felt, category C, BIA certificate, electroconductiv, washable- H3 < 0,1mg/m³,

Year of construction: 2025, condition: new, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. Gsdpoghmp Nsfx Acmokd We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Brsgistoyp Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills Gkjdpfx Aoghmptscmod crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. Gkodpfehga Srox Acmod We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. Gksdpfx Aehgbarecmed We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Gededlhbpopfx Acmokd Weight: 1,250 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. Gkodpfxogv I Iho Acmod 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2026, heating capacity: 49 kW (66.62 HP), smoke pipe connection diameter: 180 mm, input voltage: 380 V, Size: 2/S Gjdedlhafspfx Acmjkd Rated thermal output: 49 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with fireclay bricks For rooms of: 1,450 m³ (according to DIN) Fuel: logs, chipboard, wood chips, chip briquettes Fuel consumption: 15 - 25 kg/h Forced air flow rate: 4,000 m³/h Exhaust outlet: Ø 450 mm Flue gas connection: Ø 180 mm Weight: 1,025 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Size: 0 Nominal heat output: 34 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks For rooms of: 850 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, chip briquettes Fuel consumption: 10 - 12 kg/h Forced draft air volume: 2,200 m³/h Outlet opening: Ø 350 mm Flue gas connection Ø 150 mm with flue gas fan Weight: 690 kg PLC control cabinet: 380 Volts Gkodsdlgvfopfx Acmsd

Condition: new, Year of construction: 2026, Size: 4 Gkjdpfxjdlhcde Acmjd Nominal heat output: 116 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with refractory bricks Suitable for rooms of: 2,900 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 30 - 35 kg/h Forced air supply, free-blowing: 7,500 m³/h Exhaust outlet: Ø 600 mm Flue gas connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Size: 5 Nominal heat output: 145 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks For rooms of: 3,800 m³ (according to DIN) Gedpfsdlhcrsx Acmskd Fuel: logs, chipboard, wood chips, chip briquettes Fuel consumption: 35 - 40 kg/h Forced air output: 9,400 m³/h Exhaust outlet: Ø 700 mm Flue gas connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 volts