Blister Packaging Machine

Hamer BPC-23

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable Gkjdotndpzspfx Aciob - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AM00222090802-01-03, - Function: Heat sealing of blister boxes Gsdpfx Acopfcy Esiskb - Main material of the machine: Stainless steel 304, aluminum alloy - Dimension: 1000mm x 715mm x 450mm - Weight: About 150 kg (excluding mould) - Power supply: 220 V 50 / 60 Hz single phase 3,5 KW - Compressed air supply: Pressure 5 bar - 8 bar, approx. 18 L / min - Seal size: 300mm x 400mm - Packing depth: Deepest 100mm - Production speed: Up to 12 cycles per minute depending on operator skill - Heat seal pressure: 300-1500kg adjustable Autovak is an international company with research, development and manufacturing facilities in Suzhou, China, and sales and service offices in the United States, Germany and Malaysia. The company has over 20 years of experience in the packaging of medical devices. From doing OEM for European packaging machine manufacturers to produce self-designed machinery and equipment with independent intellectual property rights and own brands, Autovak has accumulated a lot of know-how in the field of medical device packaging and online printing.

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Gkedpfx Ajif Elgocieb

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Gkedpfx Acsv Nkvcoijb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, functionality: fully functional, Reportedly very little used IMA model TR 135 medium speed blister packaging machine. - Manufacturer: IMA - Model: TR 135 - Forming capacity: max 90 cycles/min - Cutting capacity: max 230 cycles/min - Control system: Color touch screen - Feeding system: Pre-feeder hopper with capacity 45 litre + bowl with vibrator - Power supply: 400 V, 50 Hz (max power 12 kW, average power 7 kW) - Air supply: 700 Nl/min, 6 - 8.5 bar - Cooling device: Chiller Euro cold ACW-LP 16T Gkedpoy Slchsfx Aciob Blisters: - Blister: PVC/ALU blisters. - Size range: Width 30 - 88 mm x Lenght 60 - 135 mm x Thickness 3 - 12 mm - Available parts: Possible to supply with IMA A83 horizontal cartoning machine

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm • Installed power: 21 kW • Electrical power supply: 380 V III + N • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION Gjdpfx Acozcftgeiekb • Original manuals • CE marking • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection