Used Blacksmith Vise for sale (568)

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Kodpfx Aozc Dzijnwolu Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Kjdszd Aitepfx Anwslu Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Condition: good (used), Fritz Werner Universal Tool Milling Machine, Type 5130 An extremely robust and precise universal tool milling machine from the long-established, high-quality German manufacturer Fritz Werner (Model 5130). This conventional knee-type milling machine stands out due to its solid grey cast-iron construction and exceptional reliability. It is ideally suited for workshops, toolmaking shops, repair facilities, demanding DIY enthusiasts, or training centers. The machine features a swiveling vertical milling head with manual quill feed (perfect for additional drilling operations) as well as a mechanical feed gearbox. A standout feature is the retrofitted premium safety spindle guard from Tecno Più. Technical specifications at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Design: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with drawbar) Table dimensions: Approx. 600 x 215 mm with 3 parallel T-slots Axis movement: Manual via precision handwheels (2 mm travel per revolution) + automatic feed (Type 101) Vertical head: Swivels ± 90° with manual quill lever and adjustable depth stop Drive: Three-phase motor (400 V, CEE plug included) Included accessories: Solid machine vise (mounted on table), drawbar, chip guard hood Klodozcw Ddspfx Anwou Safety upgrade (included): Spindle guard: Tecno Più S.r.l. (Model PTR 11/180) Year of manufacture of guard: 2017 (CE marked) Function: Impact-resistant polycarbonate shield (180 mm) with IP67 safety microswitch for automatic spindle cut-off when the guard is open. You can find other milling machines—new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2010, Available for immediate pickup from our location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture 2010 Ksdjzd N Uvopfx Anwslu Siemens Sinumerik 810 D Table 1500 x 400 mm Travel ranges X/Y/Z 1300/500/570 mm SK 40 Automatic tool clamping Drive 12/9 kW Spindle speeds 60 – 8000 rpm Electronic handwheel Ball screw Vise Various clamping devices Weight 4 tons Price: Euro 6,500.— plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: Kodpfozd N T Ejx Anwolu MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Vertical milling machine LAGUN Type FVA 3 LA Klodpfx Aszd N Szonwsu Year of manufacture 1990 Table 1600 x 400 mm Travel X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: Euro 1,500.00 plus VAT, ex works

Condition: used, mileage: 99,050 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle no.: 5317X ----Why autonext GmbH?---- One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available at the best selection and the best price. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent Condition!---- First owner, German vehicle, non-smoker vehicle Fully serviced exclusively at Mercedes Benz Next service due in 123 days As-new front and rear brakes As-new all-season front tires Mixto variant Number of seats: 5 Tow bar Workshop "Sortimo" with vise and shelving systems Ksdpfx Anoyiippowolu Parking package with rear-view camera MBUX multimedia system (7" touchscreen) Cruise control system Anti-theft alarm system Automatic climate control (Tempmatik) Auxiliary heating Comfort seats for driver and passenger, including seat heating LED cargo area lighting Tinted windows Fixing rails for roof rack ----Special features:---- * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Parking package with rear-view camera * Rear-view camera * Passenger side airbag * Tow bar: fixed ball head * 13-pin trailer socket * Armrests, driver and passenger doors * Fixing rails for roof rack * Floor group, combi version * DAB tuner (digital radio reception) * Roof lining * Roof lamp in cargo area with door contact * Anti-theft alarm system * Entry handle on rear right C-pillar * Tachograph controls in roof lining front * Digital tachograph * Suspension: Stabilization level I * Window in load/passenger compartment: fixed, front left * Window in load/passenger compartment: fixed, front right * Vehicle without lowering function * Cruise control system * Rear door (270-degree opening angle) * Wooden floor in cargo area * Terminal strip for electrical connections (under driver's seat) * Automatic climate control (Tempmatik) * Fuel tank: main tank 93 liters * Partition wall in cargo area between C-pillars * Cable duct at rear portal * Cable duct on side wall * Side marker lights * Spare wheel with driving tires * Spare wheel holder under end of frame incl. jack * Windscreen wipers with rain sensor * Rough road suspension * Mud flaps rear * Mud flaps front * Seat belt system with warning device (passenger side) * Cabin seats: Heated passenger seat * Cabin seats: Passenger comfort seat * Cabin seats: Passenger seat with lumbar support * Cabin seats: Heated driver seat * Cabin seats: Driver comfort seat * Cabin seats: Driver seat with lumbar support * Passenger/load compartment seats: 1st row, 3-seater bench * Red fuel cap * Rear door step * Rear windows tinted / black glass * High wood panelling in cargo/passenger compartment (up to roof) * Wheel arch panelling in cargo/passenger compartment (plastic) * Lashing rails in cargo area - side wall at belt rail * Lashing rails in cargo area - side wall at roof frame * Fleece battery 92 Ah * Reinforced front axle * Warm air duct to load/passenger compartment * Thermal insulation driver’s cab * Thermal insulation loading/passenger compartment * Thermal insulation glazing (windscreen ...)

Condition: used, mileage: 115,050 km, power: 132 kW (179.47 HP), first registration: 07/2019, fuel type: diesel, overall weight: 7,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 8,238 mm, total height: 2,340 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Internal vehicle no.: 9355 ----Why autonext GmbH? One of the largest commercial vehicle showrooms in Germany. Always over 400 vehicles immediately available at . Largest selection – Best price. More than 1,000 satisfied customers per year – Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition Single owner, German vehicle, non-smoker vehicle Full service history exclusively at Iveco New front brakes Permissible total weight: 7,000 kg Body: Flatbed + curtain / tarp Number of seats: 7 Workshop "Sortimo" with vise and shelving systems Tow bar, increased towing capacity 3,500 kg Hydraulic tail lift Reversing camera Navigation system Cruise control Air conditioning Auxiliary heater Fire extinguisher Tachograph Twin rear wheels ----Warranty & Quality Seal: * Warranty Assistance systems: * Reversing camera * Speed limiter * Cruise control Lighting: * Daytime running lights * Headlight range adjustment Media & Infotainment: * Navigation / Online navigation * Radio/CD * MP3-compatible audio system * USB interface/port * Hands-free system * Bluetooth phone preparation Safety & Technology: * Differential lock * Electronic brake-force distribution (EBD) * Electronic stability program (ESP) * Driver airbag * Anti-lock braking system (ABS) * Traction control system (ASR) * Brake assist (BAS) * Standard suspension * Immobilizer Comfort & Climate: * Auxiliary heater * Service interval display * Electrically heated mirrors * Electric windows * Air conditioning * Central locking with remote control * Front passenger double seat * Tinted glass * Comfort driver's seat * Power steering Tyres & Wheels: * Spare wheel * All-season tyres Exterior & Design: * Tow bar (trailer hitch) * Increased towing capacity Interior & Design: * Tachograph Environment & Charging: * EURO VI * Particulate filter * Emission sticker 4 Transmission: * Manual transmission Further information: * Tail lift * Non-smoker vehicle * Smoking package Kledpfx Anoy A A E Uswou * Service book * Workshop conversion * Workshop equipment * Workshop vehicle * Twin rear wheels ----New main (TÜV) and emissions (AU) inspection available upon request. ----Warranty & “TÜV Profi Check” are available from us, of course! We will also gladly accept your vehicle as trade-in! We can provide you with a custom financing or leasing offer – no down payment, can be repaid at any time, and with special repayment options. Please let our sales team know your requirements, we will be happy to advise you. ----Schedule a test drive and see the quality of our vehicles for yourself. Appointments: Mon.–Fri. 08:30–18:00, Sat. 09:30–13:30. ----Visit us at . We look forward to your visit! ----Errors and changes excepted. Equipment advertised online is not part of the contract. Equipment must be verified on site.

Condition: used, mileage: 120,050 km, power: 125 kW (169.95 HP), first registration: 08/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,980 mm, total height: 2,360 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 5367X ----Why choose autonext GmbH? One of the largest commercial vehicle displays in Germany, always over 400 vehicles immediately available. Largest selection - Best prices. More than 1,000 satisfied customers per year - Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition Single owner, German vehicle, non-smoker vehicle Full service history, maintained exclusively at Ford Next service in 279 days Like-new brakes, front and rear Number of seats: 6 Workshop fit-out by "Sortimo" with vise and shelving systems Tow bar Reversing camera Front and rear parking sensors Cruise control Rear upper LED exterior lights ----Special equipment: * Audio system 17: Digital radio reception (DAB / DAB+) with 4" TFT multifunction display * Audio / radio remote control on steering wheel * Radio pre-wiring, 6 speakers * Voice control and Bluetooth interface * Driver assistance system: emergency call system * FordPass Connect incl. eCall * Audio system 21: Digital radio reception (DAB / DAB+) with 8" multifunction display * Audio / radio remote control on steering wheel * Radio pre-wiring, 6 speakers * Voice control and Bluetooth interface * Driver assistance system: emergency call system * FordPass Connect incl. eCall Kodpeywqwnefx Anwslu * Smartphone interface (Apple CarPlay & Android Auto) * 2nd battery * 13-pin trailer socket * Rear upper LED exterior lights * Removal of 3rd seat row in load/passenger compartment * Rear window wiper * Spare wheel with driving tires * Reversing camera with color display * Heat-insulating glass in load/passenger compartment, medium tint Standard equipment: Cruise control, leather steering wheel, Seat Package 13: driver's seat (4-way adjustable), front passenger double seat, fabric upholstery, cab seats: driver’s seat with lumbar support, driver’s seat with armrest, cornering light, passenger airbag, driver airbag, Trailer Sway Control (TSA), Anti-lock Braking System (ABS), front-wheel drive, electrically adjustable and heated exterior mirrors, integrated side indicators in exterior mirrors, floor covering: full rubber mat in load/passenger compartment, onboard computer, entry lights, Electronic Brakeforce Distribution (EBD), Electronic Stability Program (ESP), electronic traction control, hill start assist, emergency brake assist, crosswind assist, electric windows, FordPass Connect incl. eCall, 6-speed gearbox, lockable glovebox, rear wing doors (opening angle 180 degrees), body type: Kombi High-Roof Standard, body variant: medium-height roof, air conditioning, chrome trim on front grille, height and length adjustable steering column, engine 2.0 l - 125 kW TDCi CAT, My Key (2nd programmable vehicle key), fog lights, park pilot system front and rear, wheelbase 3300 mm, tire repair kit, tire pressure monitoring system, particulate filter, rear seat package 3 (3-seat bench, 2nd/3rd row, wide), low emissions according to Euro 6d, intermittent, adjustable wipers, right sliding door to load/passenger compartment, rear mud flaps, side protection strips, fixed 2nd row seats in load/passenger compartment, daytime running lights, Trend, integrated rear step, central locking with remote control, second folding key with remote. ----New TÜV/EU roadworthiness test on request.

Condition: reconditioned (used), Year of construction: 2016, operating hours: 9,701 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: series 31i-B5, overall weight: 3,300 kg, spindle speed (max.): 42,000 rpm, spindle nose: A2-4", number of spindles: 2, number of slots in tool magazine: 72, tool length: 150 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC machining centre WILLEMIN MACODEL W508MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2016 CNC control: FANUC series 31i-B5 Number of simultaneous axes: 5 Stroke X axis: 450 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 425 [mm] Traversing feeds X, Y and Z axes: 40000 [mm/min] Axes acceleration: 10 [m/s²] Max. bar diameter in turning spindle: 42 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 7.5 [kW] Angular A axis stroke: 360 [°] Resolution A axis: 0.001 [°] Drive A axis: Torque-motor Spindle taper A axis: A2-4" B axis swivelling stroke: -15 [°] / +100 [°] Resolution B axis: 0.001 [°] Drive B axis: Torque-motor Spindle type: HSK-E40 Max. spindle speed: 42000 [rpm] Tool changer magazin number of stations: 72 Max. tool lenght: 150 [mm] Max. tool diameter: 80 [mm] Tool change time: 1 [sec] Chip to chip time: 3 [sec] Lubrication tank capacity: 150 [l] Collant pump flow rate: 60 [l/min] Rated current: 50 [A] Total power required: 35 [kVA] Klsdpfjy Uwp Eex Anwsu Supply voltage: 400 [V] Working hours: 9701 [h] Machine weight: 3300 [Kg] INCLUDED EQUIPMENT: x1 Back working unit with integrated 3-position turret on linear slide x1 Vise on back working unit x1 Counter-spindle on back working unit x1 42,000 rpm spindle with air/oil lubrication x1 RENISHAW OMP40-2 part probe x1 BLUM LaserControl NT laser measuring system for tool setting and tool monitoring x1 DETECTOR FRANCE type 202 tool breakage detection device x1 A2-4" collet chuck Set of 58 HSK-E40 tool holders x1 Self-tightening drill chuck LNS Super Hydrobar bar feeder, type 6.42 HS 3.2 Various equipment for LNS Super Hydrobar bar feeder Set of technical manuals x1 parameter backup system Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, including CNC milling, drilling, and tapping machines, as well as CNC grinding machines.

Year of construction: 1970, condition: ready for operation (used), A conventional universal milling machine Malick & Walkows is available. Table dimensions X/Y: 1000mm/300mm, speed: 1120rpm, travel X/Y/Z: 900mm/300mm/500mm, quill stroke: 80mm, feed rate: 250mm/min, machine dimensions X/Y/Z: approx. 1700mm/1900mm/1700mm, weight: approx. 1750kg. Including machine vise and accessories. An on-site inspection is possible. Klodpfx Anjzdumweweu

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: Klsdpfxsy Dcu Ee Anweu - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, controller manufacturer: FANUC, controller model: i Series, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details. Kledpsy Uwzbofx Anweu • Table Dimensions: 650 × 375 mm • Spindle Power: 5.5 / 7.5 kW • Total Part Count (Pezzi Totali): 114,937 parts • Operating Time (Tempo Lav): 858 h 41 min 59 sec • Cutting Time (Tempo Taglio): 3,329 h 25 min 12 sec • Power On Time (Acceso): 13,604 h 41 min • Cycle Time (Tempo Cic): 0 h 1 min 59 sec • Documentation: Instruction manuals and CE declaration of conformity included Additional equipment • D'Andrea TRM/50 boring head attachment • Gerardi vise (345 × 120 mm) • Chip conveyor system Technical Specification Taper Size BT 40

Condition: new, Year of construction: 2026, - Stepless speed control - Quickly adjustable depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack and pinion - LED lighting in the head - Continuous/normal drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Arm overhang 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm Kljdsd Nk S Iepfx Anwou - T-slot size (arm): Number 2, spacing 125 mm - Speed display Digital - Drilling depth display Digital - Quickly adjustable depth stop - Manual feed - Motor, three-phase, 400 V - Spindle speeds, stepless, 30 - 3,000 rpm Optional drilling kit 3 consisting of: - Machine vise [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 € 485.00 Optional: Coolant system: € 620.00 FACTORY WARRANTY: 3 years DELIVERY: Free delivery including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Cutting device Programmable boring depth shut-off Boring depth and speed display - digital Threading device M20 (dependent on pitch) Ksdpjd H Rgfsfx Anwolu Infinitely variable speed from 125 - 4000 RPM in two stages, stage change via belt deflection. Boring capacity 25/30 mm Spindle MK 3 Boring depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Feed rate 0-300 mm/min, infinitely variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor - three-phase 400 V, pole-reversible 0.9/1.45 kW Weight 300 kg OPTION: - Drilling package 5 consisting of: taper mandrel, drill chuck, vise, and T-slot set (€845) - Spindle stop and chip breaker module (€864) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Drilling depth and speed display – digital Thread cutting capacity M20 (depending on pitch) Stepless speed control from 125 - 4000 RPM in two stages, stage change via belt adjustment. Drilling capacity 25/30 mm Thread cutting capacity (depending on pitch) M20 Spindle MK 3 Drilling depth 125 mm Overhang 280 mm Klsdjd H Rffopfx Anwou Usable table surface (swiveling) 420 x 340 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor – three-phase 400 V, pole-changing, 0.9/1.45 kW Weight 275 kg OPTION 1 - € 625.00 Drilling package 4 consisting of: - Vise [felix] 2.0 - 120 mm, clamping width 0-168 mm - Quick-change drill chuck, mount B18, 3-16 mm (accuracy 0.17 mm) Taper shank MK 3 B18 and reducing sleeve MK3 to MK 2, as well as MK 3 to MK 1 OPTION 2 - € 1,245.00 Thread cutting attachment, max. M20, adjustment of thread cutting depth via digital depth display Delivery: FREE DELIVERY, including packaging Factory warranty: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table area (W x D): 590 x 450 mm Speed display digital Drilling depth display digital Drill depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/Table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with gearbox) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700 Accessories: Coolant system (€ 620) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Accessories: Drilling package 5 (€ 875) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reduction sleeve MK III/MK I - Reduction sleeve MK III/MK II - Quick-change drill chuck B18 Kledsfmh Tlopfx Anwou 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your doorstep incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Continuous/normal drilling capacity 15/18 mm (in E335/St60) 17 Nm Threading capacity M12 (depending on pitch) Spindle: MK II Drilling depth: 70 mm Overhang: 220 mm Distance spindle/work surface: max 750 mm Column diameter: 70 mm Usable work surface W x L: 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number: 2, 125, 14/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: quickly adjustable stop ring Drilling feed: manual Table height adjustment: hand crank/rack and pinion Motor: three-phase 230V with frequency inverter: 0.75 kW Spindle speed: 40-4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Accessories (optional) Drilling kit 2 consisting of: - Machine vise [felix] 2.0 80 mm - Quick-change drill chuck B16 1-13 mm (accuracy 0.17 mm), - Tapered shank MK 2 B16 and reducing sleeve MK 2 to MK 1 €315.00 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE! Kledpfx Aexgdn Ajnwou

Condition: new, Year of construction: 2026, Standard equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1 = M30x3.5 / R2 = M24x3 / R3 = M36x4 Spindle MK IV Drilling depth: 160 mm Overhang: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Speed indicator digital Drilling depth indicator digital Drill depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optional R1 or R2 without extra charge Extra charge for R3: €2,250 Accessories Drilling package 6 (€910.00) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 Kledpelfdufsfx Anwsu - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your doorstep including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Threading device OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum threading capacity - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Overhang (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display, digital Drilling depth display, digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,200 mm Motor, three-phase 400V with frequency inverter (kW) 4.0 Spindle speeds, stepless R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Kjdped Su Agsfx Anwolu Optional drilling package 6 (€910.00 plus VAT) - Vise [felix] 2.0 150 - Tapered arbor MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) Delivery within Germany, including packaging, free to your doorstep! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2026, Continuous/Normal drilling capacity 25/30 mm Maximum threading capacity M20 Spindle MK III Drilling depth 125 mm Overhang 260 mm Kjdpfx Asdvhdienwjlu Column diameter 110 mm Usable table area [W x L] 420 x 340 mm Speed indicator – scale Drilling depth indicator – scale Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Motor – three-phase, 400 V, pole-reversible, 0.90/1.45 kW Spindle speed with gearbox, continuously variable 125-4000 rpm in 2 steps: I: 125-2000 rpm II: 250-4000 rpm Speed change is achieved by belt shifting. OPTION 1 - € 625.00 Drilling package 4 consisting of: - Vise [felix] 2.0 - 120 mm, clamping range 0-168 mm - Quick-change drill chuck, B18 mount, 3-16 mm (accuracy 0.17 mm) Taper shank MK 3 B18 and reducing sleeve MK 3 to MK 2, as well as MK 3 to MK 1 Delivery: free to your doorstep, including packaging FACTORY WARRANTY: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, total width: 2,550 mm, total height: 3,790 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #611 Mercedes-Benz AROCS 2548 L 6x2 BL with Kroll K 14.0 / 28 PE Superstructure ? Kroll ADR Combi L4BH ? K 14.0 / 28 PE ? Stainless steel tank 1.4301 ? Approx. 14,000 liters tank capacity ? Approx. 8,000 liters rinsing water volume ? Approx. 10,600 liters sludge volume ? Extension piston ? Piston positions approx. 3,300 l + 10,400 l / 5,500 l + 8,200 l / 7,700 l + 6,000 l Vacuum system ? CVS VacuStar 1600 ? Approx. 1,550 m³/h ? Rotary vane pump ? Approx. 20 m DN125 suction hose ? Suction hose storage cassette ? Dirty water can be discharged via suction hose ? Water chamber can be filled via suction hose High-pressure system ? URACA KD 718 ? Approx. 315 l/min at 170 bar ? Hydraulic hose reel for up to 240 m DN25 ? Approx. 160 m DN25 rubber flushing hose ? Additional flushing hose approx. 60 m DN13 rubber ? Boom arm mounted on the tank lid ? Telescopic to approx. 4,600 mm working length ? Suction hose guide on the boom Special features ? IFM CAN control with display ? Remote control ? Air conditioning ? Navigation ? Hands-free system ? Digital car radio DAB+ ? Garbage bin / scrap container ? Vise Kjdpfjzbgh Aex Anwslu ? Hand washing facility ? Reversing camera ? Work lights, 2 LED per side, and 1 LED on the boom ? Rotating beacon, cab 2x / superstructure 2x ? Equipment cabinet with hose tray on the right and hose tray on the left ? Soundproofing cladding ? Tool box, plastic ? Advertising panels on the left and right of the tank Technical data ? Mercedes-Benz AROCS 2548 L 6x2 ? 6x4 ? EURO VI ? 476 hp / 350 kW ? Automatic transmission ? Fuel tank approx. 450 liters ? Cab color MB 2549 pure orange ? Permissible total weight: 26,000 kg ? Vehicle condition: New ? Vehicle type: ADR Combi L4BH ? VIN: W1T96402120865352 For further detailed information and/or images, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Changes, prior sales and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our general terms and conditions and with the exclusion of any warranty.

Condition: used, mileage: 90,800 km, power: 176 kW (239.29 HP), first registration: 11/2005, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: orange, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,400 mm, Year of construction: 2005, Equipment: ABS, air conditioning, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal number: #579 IVECO ML 5Q 4x2 with Kutschke septic tank cleaner / vacuum truck incl. high-pressure cleaning system Superstructure ? Kutschke septic tank cleaner / vacuum truck ? Stainless steel tank 1.4301 ? approx. 5,000 liters tank capacity ? approx. 1,000 liters rinsing water volume ? approx. 4,000 liters sludge volume ? Discharge via tipper Vacuum system ? Jurop PR200 ? approx. 1,250 m³/h ? Rotary vane pump ? 5 m 4" suction hose with 2.5 m suction pipe ? Dirty water can be discharged via suction hose ? No fixed suction hose mount, separate hoses High-pressure system ? Pratissoli EKL 25 ? approx. 59 l/min at 160 bar ? Outrigger arm available ? Telescopic to approx. 3,900 mm working length ? approx. 60 m DN13 rubber hose ? Manual reel ? Positioned at the rear right in the chassis area Special features ? Analog relay control ? Cable remote control ? Air conditioning ? Hands-free system ? Trash can / scrap container ? Vise ? Reversing camera ? Equipment cabinet on the left ? Hose trays on the left and right in front of the pumps ? Noise protection cladding ? 1 aluminum toolbox ? 2 halogen work lights at the rear ? Rotating beacon at the front 1x / at the rear 1x ? Advertising boards, design unspecified Technical data ? IVECO ML 5Q ? 4x2 ? EURO 3 ? 239 hp / 176 kW ? Manual transmission ? Fuel tank approx. 100 liters ? Cab color: Orange ? Permissible total weight: 16,000 kg ? Unladen weight: approx. 10,150 kg ? Dimensions: approx. 7,000 x 2,550 x 3,400 mm Klsdpfszbgh Nox Anwou ? First registration: 04.11.2005 ? Vehicle type: Septic tank cleaner / vacuum truck with high-pressure cleaning system ? VIN: ZCFA1MJ0202462144 For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our terms and conditions and excludes any warranty.

Condition: good (used), Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design, with large vise -Clamping surface: 1200 x 1100 mm -Table height: 850 mm Kledey Tit Hspfx Anwou -Sheet thickness: 105 mm -Vise: Jaws 150 x 30 mm, clamping range 245 mm -Overall dimensions: 1300/1200/H1060 mm -Weight: 1100 kg

Condition: excellent (used), functionality: fully functional, Universal milling machine Maho MH 500 C, CNC control system Philips 432 and accessories from a training workshop, in excellent condition!! Technical data: >> Year of manufacture approx. 1985 >> CNC control system: Philips 432 >> Speed up to 4000 rpm >> Total connection value: 24 kVA >> Travels X/Y/Z: 500/400/300 mm >> Vertical and horizontal spindle - SK40 >> Hydraulic clamping system Kodpozaaq Uofx Anwjlu >> Weight approx. 2000 kg >> Space requirement: approx. 2.6 m x 2.2 m, height 1.9 m Accessories and equipment: >> CNC control system: Philips 432 >> Hydraulic clamping, vertical and horizontal >> Central lubrication >> Electronic handwheel >> Coolant system >> Tool cabinet with accessories: vise, tool holders, clamping tools, collets, ground shims and much more Complete manuals, machine data sheet, operating instructions, electrical diagrams, etc. About the machine: Offered is a Maho MH 500C universal milling machine with a Philips 432 CNC control system, in very good condition. Each axis has a continuously adjustable axis drive, consisting of a responsive drive motor and a backlash-free ball screw. Thanks to various cycles such as circular pockets, rectangular pockets, milling grooves, drilling, deep-hole drilling, thread cutting, etc., the Maho is very easy to operate. The milling machine was used in a training workshop. Furthermore, the machine has hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal operation is very easy by folding down the vertical head. Take advantage of the opportunity to inspect and test the Maho on site while it is powered up.