Forging press

Lasco HO-U 630 SO

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 Tsdpjwlp Hdjfx Akijd If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Todpfx Akjd Id Ugjisd Base frame

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Tedpjwbginjfx Akied Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: Tsdpfx Akov T Nqaeied - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, position of the milling head: Testa ad assi ortogonali indexati - TTL2 25 360, spindle diameter: 180 mm, travel distance W-axis: 1,000 mm, table load: 100,000 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, table length: 3,000 mm, table width: 3,500 mm, quill travel distance: 2,500 mm, quill diameter: 180 mm, spindle stroke: 1,000 mm, workpiece weight (max.): 100,000 kg, torque: 9,050 Nm, CNC BORING MACHINE PAMA mod. SPEEDRAM 2000 Hydrostatic CNC Control: Siemens Sinumerik 840D Axis X: 13,000 mm Axis Y: 5,000 mm Axis Z: 1,200 mm Axis W: 1,000 mm Total axial travel (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse on all axes: 20,000 mm/min Spindle: Boring spindle diameter: 180 mm Spindle carrier ram dimensions: 400 x 440 mm Spindle speed (3 ranges) max: 2,500 rpm Spindle power (S1): 91 kW Spindle nominal torque (S1): 9,050 Nm Spindle internal taper: ISO 50 DIN 69871 AD-Type Big Plus Orthogonal axis indexed head – TTL2 25 360 Tool taper: ISO 50 DIN 69871/2 AD-Type Big Plus Max spindle power: 25 kW Max spindle speed: 2,500 rpm Speed ratio: 1:1 Spindle indexing: +/- 100°, 200 positions per 1° Head indexing: +/-180°, 360 positions per 1° Max spindle nominal torque: 1,000 Nm TH 100 rotary-travelling table: Table dimensions: 3,000 x 3,500 mm Table load capacity: 100 Ton Central T-slot size: 36h7 mm Lateral T-slot size: 36h12 mm T-slot pitch: 320 mm Longitudinal travel V-axis: 2,500 mm Feed/rapid traverse V-axis: 10,000 mm/min Chain-type tool magazine with 80 tools (capacity CU 145 R80) Machine weight approx. 160/165 Ton Complete with: - Hinged belt chip conveyor - No. 02 side chip conveyors for rotary table - Fixed closed accessory magazine with 2+1 positions - Fixed tool rack (ISO50, 6 positions) - Internal and external tool coolant system, 30 bar Tsdoyxg Hbspfx Akisd - Wireless workpiece probe (Renishaw) USED MACHINE YEAR: 2009

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS Tedpfx Aoyuqacekied CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Todsf Rt Ubepfx Akiod

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: Tjdsx Enapspfx Akiod • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. Tsdpfx Akjh Hd A Sjied The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm Tsdpfx Aedzp Tcokijd - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.