Used Beveller for sale (630)

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) Nwodpjd R U Adsfx Aprok →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Nwsdpfxji Ri R Ss Aprjk Center telescopic stage 1, rear extension extended to stage 1: 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Type Approval pursuant to EC Directive 2007/46

Condition: used, mileage: 1,283,582 km, power: 240 kW (326.31 HP), first registration: 02/2010, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space length: 8,400 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Equipment: air conditioning, parking heater, Special equipment: Wheel nut covers, trailer brake 2-line, trailer socket 24V / 15-pin, cockpit distribution, cab: comfort suspension (1.8 Hz), transmission 9-speed - type: G 131-9, body variant: high roof, fuel tank: 500 L aluminum, coupling heads DuoMatic, air deflection body roof, roof height 4.0 m, air dryer 1 chamber heated, spare wheel jack, side, reversing warning system acoustic (warning signal outside), seats in the cab: driver's seat, sprung comfort seat, socket cab 24V, daytime running lights automatic, heat-reflecting glazing, auxiliary heater (air) Additional equipment: Emission standard EURO 5, axle configuration: 4x2, axle load front axle 7.5 t, exterior mirrors electrically adjustable and heated, exterior mirror electrically adjustable, left, outside temperature display, battery 165 Ah, differential lock rear axle, cab: L (long), suspension: leaf / air, power windows, generator 80 A, transmission - hydraulic shifting, urea tank (AdBlue): 95 L, rear axle H 6, bevel gear 440, body / superstructure: chassis, model update Axor 2, engine 7.2 L - 240 kW diesel (OM 926 LA), engine start / stop system, engine brake with constant throttle, pollen filter, spare wheel under frame end, disc brakes, seats in the cab: passenger single seat, fixed, splash guard front, stabilizer rear axle, stabilizer front axle, Telligent brake system with ABS+ASR, underrun protection rear, fixed, underrun protection front, preparation for toll collection, front axle crowned, immobilizer, permissible total weight 18.00 t * FIN: WDB9505391L456658 * Double deck * 42 pallets * Box body inside length: 8.40 m * Box body inside width: 2.50 m * Box body inside height: 2.50 m * First registration: 09.02.2010 * Well-maintained * TÜV valid until 02/2023 * ----Trailer: * Tandem Gföllner AKO1/10L * 1-axle * Pass-through system * 30 pallets * Double deck * FIN: VASAL210YBGKA8334 * Tare weight: 4550 kg * Payload: 5450 kg * Total weight: 10000 kg * Box body inside length: 9100 mm * Box body inside width: 2550 mm * Box body inside height: 3975 mm * Year of manufacture: 27.07.2011 * Tires: 295 / 80 R 22,5 Nwedpfjkq Ahhox Aprsk Tel./WhatsApp: * ----Vehicle + trailer total length: 20200 mm * Price net * All information without guarantee

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and Nwedpfxel Rix Nj Aprek strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Neri, gear motor Nsdpfxoin Hrfj Aprswk -Gear: Speed: approx. 105 rpm -Engine: Type T63BN/4 -Power: 0.18 kW / 1400 rpm -Shaft: Ø 25 x 80 mm -Protection class: IP54 -Dimensions: 365/125/H165 mm -Weight: 8.1 kg.

Condition: new, Year of construction: 2026, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Our plasma cutting machines are primarily designed to process materials such as: - Black steel, - Stainless steel, CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. SOFTWARE Nodpsiqn Uujfx Aprewk The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with Nwjdpfxsk Uqhas Aprek automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The Nwedpfx Apsw N S E Aerok combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, mileage: 29,885 km, power: 290 kW (394.29 HP), first registration: 01/2020, fuel type: diesel, empty load weight: 7,000 kg, maximum load weight: 11,000 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, sleeper cab, air-suspended driver's seat, electric mirrors, heated mirrors, electric windows left and right, air conditioning, cruise control, navigation system, ABS (anti-lock braking system), ASR (traction control system), constant throttle, differential lock, leaf/air suspension, trailer coupling with air and electrical connections, aluminum fuel tank, underrun protection, roof hatch, green environmental badge. Wheelbase: 4800 mm Superstructure: with slidebed tow platform, wheel lift, 2x winches, radio remote control, 7.5t front axle, rear axle with 440 hypoid bevel gear, 13t, electronic braking system with ABS and ASR, disc brakes with partial protection at front and rear axles, condensate monitoring for compressed air system, electronic parking brake, stabilizer at front axle, aluminum front underrun guard, residual heat utilization, light sensor, comfort central locking, economy/power driving program, navigation system, multimedia cockpit, pre-installation for toll collection, daytime running lights, engine brake, ESP (Electronic Stability Program), lane departure warning system, attention assist, traffic sign assist, Active Brake Assist. Frame length approx. 6350 mm! Overall length: 8500 mm! Nwjdpfxexamyue Aprsk Optionally available with a loading crane (12–20 mt) at a surcharge of EUR 20,000 to 40,000! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change and prior sale and errors excepted.

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine Nedpfx Aex Ehf Njprewk -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Condition: new, power: 240 kW (326.31 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,500 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 11 m³, loading space length: 5,250 mm, loading space width: 2,300 mm, loading space height: 950 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, short cab, 1x air-suspended seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, beacon light, leaf suspension, underrun protection, roof hatch, green environmental sticker. Wheelbase: 4,500 mm Body: Meiller steel dump body approx. 11 m³ Front axle 9t, rear axle bevel gear 390 hypoid 10t Electronic braking system with ABS and ASR, ABS can be deactivated, disc brakes front and rear, electronic parking brake, condensate monitoring for the compressed air system, stabilizer front and rear, seat belt monitoring, PSM 2nd generation, reversing warning system, ClassicSpace, light and rain sensor, off-road driving program, Mercedes PowerShift 3, classic cockpit, daytime running lights, skid plate under bumper, transmission oil cooling, PTO MB 131-2c pump, engine PTO rear with hydraulic pump SAE-A. New vehicle from stock with day registration on 08.12.2025! Frame length approx. 7,200 mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Nodpfjylc Exox Aprowk

Condition: used, mileage: 512,745 km, power: 300 kW (407.89 HP), first registration: 08/2009, fuel type: diesel, empty load weight: 8,750 kg, maximum load weight: 9,250 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, next inspection (TÜV): 08/2026, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Mercedes PowerShift II transmission, Sleeper cab, 1 comfort seat, Seat heating, Power mirrors, Heated mirrors, Power window left, Power window right, Air conditioning, Sun visor, Cruise control, ABS (Anti-lock Braking System), Traction control (ASR), Constant throttle, Auxiliary drive, Automatic transmission, Differential lock, Tool compartment, ADR equipment, Leaf-air suspension, Trailer hitch with air and electrical connections, Aluminum tank, Low-noise G1, Underrun protection, 2 compartments, Roof hatch, Remote control, Green emissions sticker. Wheelbase: 3900 mm, Body: Esterer tank body with 2 compartments, approx. 13,870 l (7440 l / 6430 l) for heating oil / diesel, Remote control, 7.5t front axle, H6 13t rear axle, Bevel gear 440, Disc brakes on front and rear axles, Telligent braking system with ABS and ASR, Front underrun protection, ADR type class AT, Parameterizable special module (PSM), Pre-equipment for toll collection, Distributor cockpit, Mercedes PowerShift, Pollen filter, On-board diagnostics 2, Transmission oil cooling, Transmission lock for auxiliary drive, Tank capacity: 300 l, Auxiliary drive MB 124-10b flange and N-speed with 2 shafts. ADR valid until 08/2026! Measuring system calibrated until 2027! Recurring tank inspection valid until 08/2027! Leakage and function test valid until 08/2030! Nedpfx Apey Ezqusrowk VIN: WDB9300311L431088! In 2021, repairs were carried out on the engine for approximately €9,000.00 (cylinder head, etc.)! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length Njdjzb Iggjpfx Aprswk – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: used, mileage: 821,000 km, power: 375 kW (509.86 HP), first registration: 10/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, crane, parking heater, Special equipment: Axle load front axle 8.0 t, trailer coupling: central axle trailer G 250, audio system: CD radio comfort (Bluetooth), battery 220 Ah, CB radio, cockpit comfort, air horn, cab: adjustable cab entry, cab: with air suspension, cab: with low roof - 1560 mm, rear axle H 7, 13 t, bevel gear 300, reinforced clutch, pull-out cooler box, air intake for refrigeration units, air filter: filter for construction site vehicles, configurable special module, Voith retarder, protective plate under cooler / engine, seats in the cab: driver's seat comfort suspension seat incl. horizontal suspension, sun visor, stabilizer rear axle, stone guard grille, oil cooler transmission Additional equipment: Nwedpfx Apeza Tx Eorsk Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, differential lock rear axle, cab: L (long), suspension: leaf spring / leaf spring, power windows, generator 80 A, body/superstructure: chassis, fuel tank: 300 liters, model update from 06/2008, engine 16.0 liters - 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, steel rims 9.00x22.5, Telligent - gear shifting, Telligent braking system with ABS+ASR, underrun protection front, preparation for CB radio, preparation for telephone/fax, immobilizer, thermal protection glazing (windshield with band filter), central locking incl. key, permissible total weight 26.0 t

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Nwsdszbn Eiopfx Aprek Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A.

Condition: used, mileage: 288,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,470 mm, total height: 2,210 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are delighted that our offer has sparked your interest and can already assure you that you can purchase a good and affordable vehicle with a verifiable service history from us! MB ACTROPS 2540 COMPLETE TRUCK with certified BÖSE tilting side wall bodies Rear cargo securing system 2 x LBW BÄR 2,500 KG Trailing axle RETARDER 2 x L 7,715 x W 2,470 x H 2,210 mm internal dimensions Special equipment: Front axle load 8.0 t, airbag on the driver's side, work spotlights, audio system: Comfort CD radio (Bluetooth), exhaust pipe downwards to the right, brake connection standard and DuoMatic, compressed air connection in the cab, high-pressure compressed air unit, compressed air horn, electrical system and lighting for interchangeable body frames, cab: with air suspension, tinted windshield, vehicle without trailer coupling, info display 12.7 cm with video function, 3-part fender, fuel tank: 290 liters aluminum, cooler box / refrigerator, aluminum rims 9.00x22.5 (ALCOA matte), roof air deflector (lockable), 2-cylinder air compressor, reinforced engine brake, steered trailing axle, tire pressure control system, retarder, acoustic reversing warning (external warning signal), switch for loading platform, reinforced rear cross member, interface for fleet management system, circuit breaker, seats in the cab: passenger seat armrest, seats in the cab: driver's seat comfort suspension seat, external sun visor, side window roller blind, driver's door, 12V socket in the passenger footwell, additional 12V socket, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, automatic daytime running lights, preparation for reversing camera Additional equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 4, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, differential lock rear axle, steel compressed air tank, driving assistance system: Attention-Assist (fatigue detection sensor), driving assistance system: Brake Assist (Active Brake-Assist), driving assistance system: Lane Keeping Assist, cab: width 2.30 m, cab: L StreamSpace, cab floor with engine tunnel 320 mm, suspension: air / air (full air), power windows, generator 100 A, gearbox 12-speed - type: G 211-12, urea tank (AdBlue): 60 liters, rear axle bevel gear 440, body / structure: chassis, lower comfort bunk, comfort locking system, communication interface, radiator grille, regulated steering pump, engine 10.7 liters - 290 kW R6 diesel (OM 470), engine compartment encapsulation, single-tired trailing axle, ramp mirrors, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger seat with multiple functions, seats in the cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, front splash guard, front axle stabilizer, additional stabilizer, rear axle / trailing axle, access flap on the outside left, cab socket 24V, tachograph / EC control unit, door extension for cab, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for CB radio, preparation for toll collection, front axle with increased steering angle, regulated water pump, permissible total weight 25.00 t, auxiliary heater (water) GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Nsdpfx Apey Tgmksrewk If desir

Condition: used, mileage: 352,000 km, power: 380 kW (516.66 HP), first registration: 02/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Axle load – measuring device, front axle load 9.0 t, work lights, work lights on the upper rear wall of the cab, external mirror on the right with maneuvering position, battery 220 Ah, CB radio, air horn, cab: steel-sprung, comfort, suspension: front springs 9.0 t, 4 leaves, speed limiter, transmission 16-speed - type: G 280-16, electric tilting roof, rear axle bevel gear 300, interior filter for construction vehicles, fuel tank: 290 liters, aluminum, left, cooling capacity for hot climates, air compressor 2-cylinder, mounting plate / saddle plate 40 mm for fifth wheel coupling, mounting plate / saddle plate 40 mm for fifth wheel coupling 20 t, reinforced engine brake, reinforced engine mounting, auxiliary drive MB 131-2c, configurable special module, frame lowering without bellows residual pressure control, frame overhang 750 mm, smoker's package, retarder, reversing warning sound (external warning signal), fifth wheel coupling: manually lubricated, disc brakes with partial protection, interface for fleet management system, seat cover / upholstery: co-driver seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat, comfort suspended seat, sun visor external, sun protection roller side window, driver's door, 12V / 15 A socket in the co-driver's footwell (additional), 24V / 25 A socket in the co-driver's footwell, steep shoulder rims 11.75x22.5 (on front axle, reinforced), door extension for the cab, preparation / switch for lift axle on trailer / semitrailer, additional thermal insulation, auxiliary heater (water), twin-plate clutch Nwedpfx Apozgt S Rjrok Additional equipment: Emission standard EURO 6, axle configuration: 6x4, heated approach / front mirrors, trailer socket 24V / 15-pin, Arocs 5, step on cab left, cockpit multimedia, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: hydraulic tilting device, cab: L StreamSpace, 2.30 m, tunnel 170 mm, electric windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 liters, body / superstructure: semi-trailer tractor, comfort locking system, fenders 3-piece, steering assistance pump unregulated, steering wheel with multifunction, steering oil cooler, air intake behind the cab, heated air dryer, engine 15.6 liters - 380 kW R6 diesel (OM 473), engine variant OM 473, type of use: short-distance transport, wheelbase not defined, wheelbase variant 3300 mm, ramp mirrors, waste heat utilization, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: co-driver functional seat, steel rims 9.00x22.5, 12V socket in the co-driver's footwell, bumper corners front in steel design, tachograph / EC control unit, Truck Data Center 7 (fleet management system), turbocompound, preparation for toll collection, preparation Truck Data Center (fleet management system), front axle straight, permissible total weight 26.0 t, oil cooler transmission

Condition: used, mileage: 791,880 km, power: 390 kW (530.25 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 9,000 kg, maximum load weight: 17,000 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,000 mm, next inspection (TÜV): 08/2026, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, BigSpace, Active Brake Assist, Mercedes PowerShift 3, Lg. Haus, 1x comfort seat, 2x bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric sunroof, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), retarder, auxiliary drive, lift and lower, differential lock, fog lights, air suspension, trailer coupling with air and light connections, aluminum tank, aluminum wheels, last axle can be lifted, underrun protection, green emissions sticker Wheelbase: 4000 mm, front axle with air suspension, 8t front axle, rear axle with bevel gear 485 hypoid 13t, 7.5t trailing axle that can be unloaded and lifted, electronic braking system with ABS and ASR, disc brakes on front and rear axles, secondary water retarder, condensate monitoring for compressed air system, front underrun protection made of aluminum, additional stabilizer for rear/trailing axle, leather steering wheel, Home-Line interior concept, ambient lighting, comfort bunk top and bottom, electric auxiliary air conditioning, waste heat recovery, additional thermal insulation, warm water auxiliary heater, electric lift-up roof in glass design, hill start assist, communication interface (KOM), reversing warning system, illuminated Mercedes star, BigSpace, comfort locking system, Economy driving program, Mercedes PowerShift 3, axle load measuring device, sound system, pre-equipment for toll collection, fuel tank capacity: 430l, LED daytime running lights, cornering lights, high-performance engine brake, transmission oil cooler, ESP, lane keeping assist, distance control assist, attention assist, Active Brake Assist 3, driver airbag, refrigerator, Comfort Pack Classic, Safety Pack Top, Climate Pack, auxiliary drive MB 131-2c. Njdpfx Ajzg Nbueprjwk Frame length approx. 5000mm! Frame height approx. 1050mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 217,000 km, power: 310 kW (421.48 HP), first registration: 08/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, We are delighted that our offer has sparked your interest, and we assure you that you will be able to purchase a good and affordable vehicle with a verifiable service history at our dealership! Special equipment: Storage compartment above windshield, lockable, axle load - measuring device, ambient lighting LED (driving and living), trailer stabilization program TSA, trailer brake 2 - line, audio system: digital radio DAB / DAB+, equipment package: Driving, equipment package: Economy, equipment package: Media, equipment package: Safety, batteries arranged on top of each other, air horns (2) on the cab roof, driver assistance system: high beam assistant and cornering light, cab: shaving mirror, cab: smoke detector, vehicle without trailer coupling, vehicle transmission 12-speed - type: G 211-12, holder for notebook, rear lights LED, automatic climate control, upper comfort bunk, wide, fender 3-piece, fender 3-piece with splash guard, fuel tank: 500 L aluminum, left, cooler box / refrigerator, steering oil cooling, integrated air intake, roof air deflector, air compressor 2-stage, illuminated Mercedes star, reinforced engine brake, trailing axle 7.5 t steered, load-relieving, PremiumComfort mattress top, PremiumComfort mattress bottom, wheelbase variant 4900 mm, frame overhang 2250 mm, rain sensor, headlight cleaning system (SRA), sliding / lifting roof electrically (glass), drawers under railing, seat cover / upholstery: passenger seat velours, seat cover / upholstery: driver seat velours, seats in the cab: armrests on both sides passenger seat, seats in the cab: driver seat comfort suspension seat, sound system, steel rims 11.75x22.5 (on front axle), auxiliary air conditioning electrically, storage compartment outside left, socket 12V / 15 A in passenger footwell additionally, socket 24V / 25 A in passenger footwell, curtain sleeping cabin, seat belt warning device Additional equipment: Emission standard EURO 6, axle configuration: 6x2, front axle load 8.0 t, Actros 5, Actros cab L, heated approach / front mirrors, trailer socket 24V / 15-pole, exhaust to the right outside, equipment package: Powertrain 2, battery 220 Ah, differential lock rear axle, torque increase 12th gear, compressed air connection in the cab, compressed air tank steel, compressed air unit high, compressed air unit with condensate monitoring, automatic activation for driving lights (light sensor), driver assistance system: Attention-Assist (fatigue detection sensor), driver assistance system: Autonomous Emergency Braking Assistant (Active Brake-Assist 5), driver assistance system: lane keeping assistant, cab: fixed cab access, cab: interior package chrome, cab: tilting mechanism hydraulic, cab: L GigaSpace, 2.50 m, floor level, cab: steel-sprung, comfort, vehicle outline lights LED, suspension: air / air (full air), electric windows, windshield tinted, vehicle without rear window, generator 100 A, regulated, speed limiter, urea tank (AdBlue): 60 L, rear axle with active lubrication, unregulated, rear axle bevel gear 440, body / superstructure: chassis, lower comfort bunk, comfort locking system, steering assistance pump electronically controlled, heated air dryer, engine 12.8 L - 310 kW R6 diesel (OM 471), engine variant OM 471, type of use: local transport, wheelbase not defined, ramp mirrors, waste heat recovery, disc brakes front and rear axle, key with remote control Njdpsynqi Refx Aprswk

Condition: used, Lange B90 KFE Edge thickness: 0.4 – 3 / 5 mm Control panel: PLC touch panel Nodpsy Ddnaofx Aprewk Pre-milling unit for pre-processing before the gluing section Automatic edge magazine for coil material Teflon-coated quick-change glue pot for hot-melt adhesive granules Workpiece height: 8 – 50 mm Fine-adjustable glue roller Guillotine shears up to 3 mm for pre-cutting coil material Pressure unit End trimming unit Multi-function milling unit for flush, radius and bevel milling Corner copying unit for workpiece edges up to 2 mm, switchable from the control panel Radius scraper Surface scraper Buffing unit Spraying unit at infeed and outfeed Year of manufacture: 2018 Machine is FUNCTIONAL and in GOOD CONDITION Available at location

Condition: good (used), Year of construction: 2000, Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° Nwodpfxjy Rt Aaj Aprek -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OE 1,5kW / VF1530-1500W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 12.0mm, maximum thickness 16.0mm - Stainless steel: Recommended thickness 5.0mm, maximum thickness 6.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 4.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0mm Structure parts - Structure type: welded - Number of supporting legs: 8 - Servo motors: Schneider - Gears and slats: bevelled - Linear guides: HIWIN - Gearboxes: Motovario - Tooth bars: YYC - Bearings: NSK - Pressure relief valves: SMC - Cooling: water cooler ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Njdephm Slopfx Aprjwk Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-CH 3kW Specifications - Maximum sheet size: 6000x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3kW - Energy requirements: 24.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts - Structure type: welded - Number of supporting legs: 8 - Servo motors: Schneider - Gears and slats: bevelled - Linear guides: HIWIN - Gearboxes: Motovario - Tooth bars: YYC - Bearings: NSK - Pressure relief valves: SMC - Cooling: water cooler ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 2-day training with machine installation Nwjdpsx A U I Ssfx Aprsk - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, maximum load weight: 35,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck in SNT design to optimize the length of the loading area, approximately 3,700 mm long. The rear of the gooseneck has a bevel of approximately 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for SZM (special heavy-duty vehicles): 4 x 2 and 6 x 2 axle configurations. Loading Platform: Telescoping loading platform, approximately 9,600 mm long, with a rear bevel of approximately 900 mm x 6°. The loading platform can be hydraulically raised and lowered after the gooseneck, with a length of approximately 3,000 mm. Load capacity up to approximately 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS. A pair of two-part AXS steel ramps with a length of approximately 4,920 mm and a width of approximately 900 mm. Open grid flooring. Hydraulically folding ramp ends. The ramps can be individually moved outwards approximately 235 mm and inwards approximately 365 mm hydraulically. Maximum load and approach angle according to technical data sheet: C470319. Maximum angle of inclination with the loading platform lowered: approximately 9°. Axles and Suspension: BPW axles and suspension. The 1st and 2nd axles are fixed, and the 3rd axle is steered. Technical axle load: 12,000 kg. Electro-magnetic reverse lock, activated via reverse gear and manually. Air suspension with lifting and lowering valve. Axle tool. Braking System: Braking system from WABCO EBS-E, in accordance with EU regulations. No connection cable to the tractor unit. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer of our choice. Load index 143/141J (144/144F). Paint Finish: 6-coat finish: Complete steel construction blasted with shot after welding. 1 coat of zinc-based primer, 1 coat of adhesive primer. Topcoat with 2 coats of 2-component paint (acrylic), in a single color: RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra charge. Included Accessories: - ASPÖCK-UNIBOX on the connection strip at the front, with 24N, 24S & 15-pin sockets. - 24N connection according to ISO-1185 - 24S connection according to ISO-3731 - 15-pin connection according to ISO-12098 - 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - Parking position on the gooseneck for warning signs when not in use. - Outboard supports on the gooseneck with mounting holes for screw-on lashing rings. - The first hole is approximately 200 mm from the front, then approximately every 400 mm. - One mounting hole in the rear upper area of the outboard supports of the gooseneck for a screw-on lashing ring. Nsdpfozkx Hbex Aprjwk - 1 pair of screw-in lashing rings included (LC 10,000 daN). - 3 pairs of recessed lashing rings inside the outboard support of the gooseneck (LC 5,000 daN). - 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - Grid flooring with approximately 5 mm sheet metal reinforcement on the gooseneck and rear bevel. - 2-inch Kingpin - Guide plate on the gooseneck for the fifth-wheel plate, approximately 500 mm wide. - Mechanical fifth-wheel supports with 2-speed gearbox and crank. - JOST Module B - static test load = 50,000 kg - Continuous grid flooring with 5 mm sheet metal as additional reinforcement, designed for point load: - Locking of the loading platform with conically welded locking profile

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² Nedpsx Ndu Defx Aprswk • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration