Used Beveller for sale (632)

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Prjdozrkwnepfx Adzoa

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid Prsdpfx Asvr Hf Eedzea gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Predpjruakgefx Adzoa Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Predpsxdfazofx Adzsa Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Prjdpexdfa Ujfx Adzsa Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Pjdpfx Aortrzdodzora Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Pjdpfx Aertryksdzsra Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 2017, Motor 3+3kW Blades diameter 400mm Pneumatic pressure 6-7 Bars Oleopneumatic saw descent system Predpfx Adezwv Hrjzsa Horizontal and vertical component pushers Total machine length with extension 880cm/110cm +- 600kg Maximum straight cut length 6080mm Minimum length of straight cut 540mm Maximum cutting length with a 45° bevel 6080mm Minimum length of mini cut with 45° incline 500mm Maximum cutting length with head orientation at 45° 6080mm Minimum cutting length with head orientation at 45° 1080mm Automatic lubrication of saw cylinders Cutting lubrication on blades Mobile digital control panel following length to be realized Programmation possible Automatic support spacer for the longest lengths Double command de protection Commissioning documents, control panel user manual and electrical diagrams 400V

Condition: used, Year of construction: 1997, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 Psdpfjzf N Edex Adzera - Commodity code 8419 3200

Condition: used, Year of construction: 2018, Used angle unit for Holz-Her CNC machining centers Year of manufacture: 2018 Features and technical specifications: Pedpfx Aszk Nlujdzera HSK 63 F tool holder with torque support with 2 horizontal tool spindles suitable for mounting a CLAMEX grooving tool and a saw blade Technical Specifications: Max. drive speed: 8,000 rpm Max. output speed: 12,000 rpm Permissible operating temperature: 85° Unit swivels 360° around the drive axis Sound level: 80 dB(A) Weight: 3,257 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Pjdpezbnl Aofx Adzjra Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. Psdpsdy Hm Njfx Adzjra 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: used, maximum load weight: 35,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt: Equipment Gooseneck * in SNT design to optimize the length of the loading area, * Length approx. 3,700 mm. Gooseneck at the rear with a bevel of approx. 1,000 mm x 6°. * Technical saddle load: 18,000 kg. For SZM: 4 x 2 and 6 x 2. Loading platform * Telescoping loading platform, length approx. 9,600 mm. * with a bevel at the rear of approx. 900 mm x 6°. * Loading platform can be hydraulically raised and lowered after the gooseneck. * Length approx. 3,000 mm. * Load capacity up to approx. 9,000 kg. Ramps * DR-10-900-4920-GR-HV-AXS * A pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. * Open grid flooring. * Hydraulically folding ramp ends. * Ramps can be individually moved outwards by approx. 235 mm and inwards by approx. 365 mm, hydraulically. * Maximum load and ramp angle according to technical data sheet: C470319. * Maximum incline angle with the loading platform lowered: approx. 9°. Axles and suspension * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered. * Technical axle load: 12,000 kg. * Electro-magnetic reversing lock, activated via reverse gear and manually. * Air suspension with raising and lowering valve. * Axle tool. Braking system * WABCO EBS-E, complying with EU regulations. * Without connection cable to the tractor unit. Tires * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice. Load index 143/141J (144/144F). Psdpfozkx Hbjx Adzora Paint finish * 6-layer finish: Complete steel structure blasted after welding. * 1 layer of zinc-based primer. * 1 layer of adhesion primer. * Top coat with 2 layers of 2-component paint (acrylic), single color in RAL 3002 carmine red. * Subsequent sealing of cavities with special wax. * Rims in silver. Multi-color and special paint finishes available at an extra charge. Included accessories * ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole 24N. * Connection according to ISO-1185, 24S connection according to ISO-3731, 15-pole connection according to ISO-12098. * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. * Parking position on the gooseneck for the warning signs when not in use. * External supports from the gooseneck with mounting holes for screw-on lashing rings. * The first hole approx. 200 mm from the front, then approx. every 400 mm. * A mounting hole in the rear upper area of the external supports of the gooseneck for a screw-on lashing ring. * 1 pair of screw-on lashing rings included (LC 10,000 daN). * 3 pairs of recessed lashing rings inside on the external support of the gooseneck (LC 5,000 daN). * 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN). * 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). * Grid flooring with approx. 5 mm sheet metal reinforcement on the gooseneck and the rear bevel. * 2-inch kingpin - guide plate from the gooseneck for the saddle plate, approx. 500 mm wide. * Mechanical saddle supports with 2-speed gearbox and crank. JOST Module B static test load = 50,000 kg. * Continuous grid flooring with 5 mm sheet metal as additional reinforcement, designed for point load. Locking of the loading platform with conical welded locking profiles, on the first approx. 3,000 mm. * One locking point every 500 mm, then one every approx. 1,000 mm. Elongated holes for hanging * and movable bridging elements: on the fixed part behind the goos

Condition: used, mileage: 34,269 km, power: 315 kW (428.28 HP), first registration: 03/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, all wheel drive, parking heater, Vehicle No.: 194-26 Mercedes-Benz 3343 Arocs 6x6 All-Wheel Drive – Former German Armed Forces Vehicle First Registration: 03/2017 * Euro 6c * MEILLER – Three-Way Tipper * 6x6 All-Wheel Drive, switchable * 3-seater * Wheelbase: 3,600 mm Special Equipment: Trailer brake 2-line, trailer socket 15-pin, 7+7-pin, audio system: CD radio, step with handrail on the roof, suspension: rear springs 2x15.0 t, fire extinguisher, windshield tinted with band filter, heated, transmission 12-speed - type: G 330-12, rear lights construction site version, hydraulic pump (Meiller pump - 7 pistons - 275), interior filter for construction site vehicles, fuel tank: 290 L steel, left, air intake behind the cab, spare wheel, rotating beacon left/right, seats in the cab: driver's seat backrest foldable, seats in the cab: middle seat with seat belt, voltage converter 24V / 12V 10 A, steel rims 9.00x22.5, storage compartment outside left, 12V socket in the front passenger footwell, additional 12V socket, additional 24V socket in the front passenger footwell, stone guard, underrun protection rear, foldable, CB radio preparation, auxiliary heater (water) Additional Equipment: Emission standard EURO 6, axle configuration: 6x6, front axle load 7.5 t, trailer socket 24V / 15-pin, Arocs, exterior mirrors electrically adjustable and heated, battery 170 Ah, differential lock rear axle, differential lock front axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting mechanism hydraulic, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: leaf spring / leaf spring, suspension: front springs 7.5 t, 3 leaves, electric windows, generator 100 A, urea tank (AdBlue): 60 L, lifting roof manually (steel), rear axle bevel gear 300, info display 10.4 cm, interior filter: pollen filter, body/superstructure: tipper, steering pump unregulated, air compressor 2-cylinder, air dryer heated, engine 10.7 L - 315 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, auxiliary drive MB 131-2c, wheelbase 3600 mm, ramp mirrors, waste heat recovery, rear window, seat cover / upholstery: fabric, seats in the cab: passenger function seat, seats in the cab: driver's seat comfort seat standard, front axle stabilizer, socket cab 24V, tachograph / EG control unit, drum brake front and rear axle, preparation for toll collection, front axle straight, permissible total weight 33.00 t, oil cooler transmission Inspection is possible at any time during our opening hours, test drive by appointment! In the event of export sales, a deposit will be retained, which will be refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee - errors, changes, typing errors and prior sale reserved. Vehicle descriptions are expressly not guaranteed characteristics. Podpfx Adjzkcwkjzsra We refer to our general terms and conditions and that these are acknowledged.

Condition: used, mileage: 39,568 km, power: 315 kW (428.28 HP), first registration: 03/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, all wheel drive, parking heater, Vehicle No.: 193-26 Mercedes-Benz 3343 Arocs 6x6 All-Wheel Drive - Former German Armed Forces Vehicle First Registration: 03/2017 * Euro 6c * MEILLER - Three-way tipper * 6x6 ALL-WHEEL DRIVE, switchable * 3-seater * Wheelbase 3,600 mm Special Equipment: Trailer brake 2-line, trailer socket 15-pin 7+7-pin, audio system: CD radio, step with handrail on the roof, suspension: rear springs 2x15.0 t, fire extinguisher, windshield tinted with band filter, heated, transmission 12-speed - type: G 330-12, taillights construction site version, hydraulic pump (Meiller pump - 7 pistons - 275), interior filter for construction site vehicles, fuel tank: 290 L steel, left, air intake behind the cab, spare wheel, revolving beacon left/right, seats in the cab: driver's seat backrest foldable, seats in the cab: middle seat with seat belt, voltage converter 24V / 12V 10 A, steel rims 9.00x22.5, stowage flap outside left, 12V socket in the passenger footwell, additional 12V socket, additional 24V socket in the passenger footwell, stone chip protection grille, underrun protection at the rear, foldable, CB radio preparation, auxiliary heater (water) Additional Equipment: Exhaust standard EURO 6, axle configuration: 6x6, axle load front axle 7.5 t, trailer socket 24V / 15-pin, Arocs, exterior mirrors elect. adjustable and heated, battery 170 Ah, differential lock rear axle, differential lock front axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting device hydraulic, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: leaf / leaf, suspension: front springs 7.5 t, 3 leaves, power windows, generator 100 A, urea tank (AdBlue): 60 L, lifting roof manually (steel), rear axle bevel gear 300, info display 10.4 cm, interior filter: pollen filter, body/superstructure: tipper, steering assist pump unregulated, air compressor 2-cylinder, air dryer heated, engine 10.7 L - 315 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, auxiliary drive MB 131-2c, wheelbase 3600 mm, ramp mirrors, waste heat utilization, rear window, seat cover/upholstery: fabric, seats in the cab: passenger swivel seat, seats in the cab: driver's seat suspension seat standard, stabilizer front axle, socket in the cab 24V, tachograph / EC control unit, drum brake front and rear axle, preparation for toll collection, front axle straight, permissible total weight 33.00 t, oil cooler transmission Prodpfxjzkcwqj Adzsa Inspection possible during our opening hours at any time, test drive by appointment! For export sales, a deposit will be retained, which will be refunded after receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee - errors, changes, typing errors and prior sale reserved. Vehicle descriptions are expressly not guaranteed characteristics. We refer to our general terms and conditions and ask you to take note of them.

Condition: used, mileage: 195,031 km, power: 260 kW (353.50 HP), first registration: 11/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total length: 7,250 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 4,100 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz 1835 Arocs 3-Side Tipper MEILLER + PK14501 SLD5 Crane Suspension: Leaf spring / Leaf spring Wheelbase: 3.90 m Palfinger Crane Type: PK 14501 SLD5 Year of Manufacture: 2019 4x Hydraulic extension 2x Hydraulic outriggers MEILLER 3-Side Tipper Type: D9 Year of Manufacture: 2019 Length: 4.10 m Width: 2.43 m Height from the ground: 1.40 m Special Equipment: Front axle load 8.0 t, Trailer brake 2 - line, Batteries arranged one above the other, Air horn, Suspension: Rear springs 13.0 t, Suspension: Front springs 8.0 t, 3 leaves, Rear lights construction site version, Rear axle bevel gear 300, Interior filter for construction vehicles, Parameterizable special module, Rotating beacon, Reversing warning device, acoustic (warning signal outside), Disc brakes front axle, Drum brakes rear axle, Protective plate under main tank, Seats in the cab: Center seat with seat belt, Prsdpfx Aozwynmodzea Sun visor outside, Storage flap outside left, 12V socket in the passenger footwell, 24V socket in the passenger footwell in addition, Stone chip protection grid, Daytime running lights automatic, Rear underrun protection, foldable, Auxiliary heater (water) Further Equipment: Emission standard EURO 6, Axle configuration: 4x2, Trailer socket 24V / 15-pole, Arocs, Audio system: Radio with USB connection, Exhaust pipe to the center of the vehicle, Exterior mirrors elect. adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: Cab entrance movable, Cab: Tilting device hydraulic, Cab: M ClassicSpace, Cab: steel-sprung, standard, Cab floor with engine tunnel 320 mm, Cab: Mounting height 420 mm, Suspension: Leaf / Leaf, Suspension: Rear springs 11.5 t, hard, Suspension: Front springs 7.5 t, 3 leaves, Window lifters electric, Windshield tinted, Generator 100 A, Transmission 8-speed - Type: G 140-8, Urea tank (AdBlue): 60 Ltr., Hydraulic pump (Meiller pump - 5 pistons - 255 / 1), Info-Display 10.4 cm, Interior filter: Pollen filter, Body variant: Standard, Comfort central locking, Fuel tank: 290 Ltr. Steel, left, Steering power pump unregulated, Air intake behind the cab, Air intake from the front, Air compressor 2-stage, Air dryer heated, Engine 7.7 L - 260 kW R6 Diesel (OM 936), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 121-2c, Wheelbase 3900 mm, Ramp mirrors, Waste heat recovery, Disc brakes with full protection, Seat cover / Upholstery: Fabric, Seats in the cab: Passenger seat, Seats in the cab: Driver's seat suspension seat standard, Stabilizer rear axle, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Rear underrun protection fixed, Preparation CB radio, Preparation toll collection, Front axle straight, Permissible total weight 18.00 t, Oil cooler transmission We would also be happy to support you in the area of financing / leasing with our partners. All information without guarantee. Errors and prior sale excepted.

Condition: good (used), mileage: 813,641 km, power: 330 kW (448.67 HP), first registration: 08/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), parking heater, power mirror, seat heater, soot filter, spoiler, - Aluminum fuel tank - Brake booster - EPS - Low noise - Tipping hydraulics - Air horn - Particle filter - Radio/CD player - Sliding roof - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox Pedpfxjzww Dfe Adzsra Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,571 kg Payload: 11,429 kg GVW: 19,000 kg Technical condition: good Optical condition: good Vehicle number: 117 Mercedes Benz Actros 1845 / StreamSpace 2.30 / Tipping hydraulics + Compressor / Eu6 .: WDF9634031B989475 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Tipping hydraulics Silo compressor Auxiliary heater Distance assist system Lane keeping assist system Emission standard EURO 6 Special equipment: Trailer socket 15-pin 7+7-pin, Audio system: CD radio (Bluetooth), Compressed air connection in the cab, Air horn, Fire extinguisher, Info display 10.4 cm with additional display, Integral rear, Fuel tank: 630 L aluminum, Air intake behind cab, Stowage flap outside right, Air deflector roof (lockable) and on the side, Mounting plate / saddle plate 40 mm for saddle coupling, Enhanced engine brake, Auxiliary drive double MB 123-11b/1c, Parameterizable special module, PremiumComfort mattress bottom, Frame lowering without bellow residual pressure regulation, Spare wheel, Interface fleet management system, Sun visor side window, Driver's door, Steel rims 11.75x22.5 (on front axle), Socket 24V in the passenger footwell additionally, Oil cooler transmission Additional equipment: Emission standard EURO 6, Axle configuration: 4x2, Front axle load 7.5 t, Actros 4, Trailer socket 24V / 15-pin, Work lights, Exhaust to the right outside, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: L StreamSpace, Cab variant: StreamSpace, Lifting roof electrically, Preparation comfort bunk above, wide, Cab: steel-sprung, Comfort, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Air, Suspension: Front spring bracket aluminum, Suspension: Front springs 7.5 t, 1 leaf, Power windows, Windshield tinted with band filter, Generator 100 A, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle bevel gear 440, Body/Structure: Semi-trailer tractor, Comfort bunk bottom, Comfort locking system, Communication interface, Fender 3-part, Radiator grille, Steering power pump regulated, Air compressor 2-stage, Engine 12.8 L - 330 kW R6 Diesel (OM 471), Engine compartment encapsulation, Ramp mirrors, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger seat, Seats in the cab: Driver's seat sprung seat standard, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Stowage flap outside left, Socket cab 24V, Tachograph / EG control unit, Door extension for cab, Underrun protection front, aerodynamic, Preparation CB radio, Preparation toll collection, Front axle crowned, Water pump regulated, Permissible total weight 18.00 t, Auxiliary heating (water), Battery 220 Ah No liability...

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Podpfx Aezw Ai Hjdzora

Condition: used, mileage: 648,000 km, power: 290 kW (394.29 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, We are very pleased that our offer has aroused your interest, and we assure you that you will be able to purchase a good and affordable vehicle with a verifiable service history at our dealership! PRICE applies to the complete unit including the Schmitz tipper body (first registration: 11/2017), steel half-shell. 24 m³ steel tipper body Disc brakes Lift axle Roll tarp Platform Non-folding underride guard Special equipment: Audio system: CD radio (Bluetooth), Battery 220 Ah, CB radio, Air horns (2) on the cab roof, Storage compartment on the upper rear wall, Communication interface, Fuel tank: 390 L, aluminum, left, Alloy wheels 9.00x22.5 (ALCOA matte), Air intake behind the cab, Mounting plate / saddle plate 24 mm for fifth wheel coupling, Auxiliary drive MB 131-2c, Frame lowering without bellows residual pressure control, Tire pressure monitoring system, Fifth wheel coupling, low maintenance, Seats in the cab: Driver's seat, sprung seat, comfort, Sun visor, exterior, Voltage converter 24V / 12V 10 A, Splash guard, front, 12V socket, additional, 24V socket in the passenger footwell, additional, Door extension for the cab, Underride guard, front, Preparation / switch for lift axle on the semitrailer / trailer, Preparation for Fleetboard, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, ABS can be deactivated, Axle configuration: 4x2, Axle load front axle 7.5 t, Trailer socket 24V / 15-pin, Work lights, Arocs, Exhaust pipe to the center of the vehicle, Exterior mirrors, electrically adjustable and heated, Differential lock, rear axle, Compressed air connection in the cab, Compressed air tank, steel, Compressed air unit, medium, Cab: Width 2.30 m, Cab: Cab entrance, movable, Cab: Tilting mechanism, hydraulic, Cab: L StreamSpace, Cab floor with engine tunnel 170 mm, Suspension: Leaf / air, Suspension: Front springs 7.5 t, 3 leaves, Window lifter, electric, Generator 100 A, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle, bevel gear 440, Info display 10.4 cm, Interior filter: Pollen filter, Body / structure: Tractor unit, Body variant: Standard, Lower bunk, Comfort locking system, Fenders, 3-piece, Steering pump, unregulated, Air intake from the front, Air compressor, 2-stage, Air dryer, heated, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine brake, Engine compartment encapsulation, Ramp mirrors, Waste heat recovery, Disc brakes with partial protection, Disc brakes, front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger seat, Front axle stabilizer, Socket, cab 24V, Tachograph / EG control device, Preparation for toll collection, Front axle, straight, Permissible total weight 18.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE Psdszxatxepfx Adzsra We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will gladly provide you with a LEASING, HIRE PURCHASE, or FINANCING OFFER. SERVICE TÜV / HU / UVV LBW / LGS inspection / Tachograph inspection / Installation of OBU device and service by our BRANDED WORKSHOP on site. TOLL / ROAD CHARGES Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our General Terms and Conditions. The information on the Internet is a non-binding description. It does not represent guaranteed characteristics. The seller is liabl

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing Prsdpfx Ajzvmx Aodzsa - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of construction: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out by the customer, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation particle size: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particles: approx. 5.14 m3 Prjdjzwccmepfx Adzja Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via customer-provided lift stations. The swarf and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system runs fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 Bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with an internal, circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without handrail, without internal rungs Volume max.: approx. 0.55 m3 25826

Condition: used, mileage: 288,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,470 mm, total height: 2,210 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are delighted that our offer has sparked your interest and can already assure you that you can purchase a good and affordable vehicle with a verifiable service history from us! MB ACTROPS 2540 COMPLETE TRUCK with certified BÖSE tilting side wall bodies Rear cargo securing system 2 x LBW BÄR 2,500 KG Trailing axle RETARDER 2 x L 7,715 x W 2,470 x H 2,210 mm internal dimensions Special equipment: Front axle load 8.0 t, airbag on the driver's side, work spotlights, audio system: Comfort CD radio (Bluetooth), exhaust pipe downwards to the right, brake connection standard and DuoMatic, compressed air connection in the cab, high-pressure compressed air unit, compressed air horn, electrical system and lighting for interchangeable body frames, cab: with air suspension, tinted windshield, vehicle without trailer coupling, info display 12.7 cm with video function, 3-part fender, fuel tank: 290 liters aluminum, cooler box / refrigerator, aluminum rims 9.00x22.5 (ALCOA matte), roof air deflector (lockable), 2-cylinder air compressor, reinforced engine brake, steered trailing axle, tire pressure control system, retarder, acoustic reversing warning (external warning signal), switch for loading platform, reinforced rear cross member, interface for fleet management system, circuit breaker, seats in the cab: passenger seat armrest, seats in the cab: driver's seat comfort suspension seat, external sun visor, side window roller blind, driver's door, 12V socket in the passenger footwell, additional 12V socket, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, automatic daytime running lights, preparation for reversing camera Prodpsy Tgmkefx Adzja Additional equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 4, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, differential lock rear axle, steel compressed air tank, driving assistance system: Attention-Assist (fatigue detection sensor), driving assistance system: Brake Assist (Active Brake-Assist), driving assistance system: Lane Keeping Assist, cab: width 2.30 m, cab: L StreamSpace, cab floor with engine tunnel 320 mm, suspension: air / air (full air), power windows, generator 100 A, gearbox 12-speed - type: G 211-12, urea tank (AdBlue): 60 liters, rear axle bevel gear 440, body / structure: chassis, lower comfort bunk, comfort locking system, communication interface, radiator grille, regulated steering pump, engine 10.7 liters - 290 kW R6 diesel (OM 470), engine compartment encapsulation, single-tired trailing axle, ramp mirrors, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger seat with multiple functions, seats in the cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, front splash guard, front axle stabilizer, additional stabilizer, rear axle / trailing axle, access flap on the outside left, cab socket 24V, tachograph / EC control unit, door extension for cab, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for CB radio, preparation for toll collection, front axle with increased steering angle, regulated water pump, permissible total weight 25.00 t, auxiliary heater (water) GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If desir

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pedpfx Adszwky Tozora

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Psdpfx Aszwkxpedzera

Condition: new, empty load weight: 3,050 kg, maximum load weight: 9,950 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Prsdpfjzwkxcjx Adzsa