Used Bench Drill for sale (6,356)

Condition: new, bore capacity in steel (diameter) 35,0 mm Nodpfxjxaabre Agnewc bore capacity in cast iron 40,0 mm throat 320 mm threading M 24 in Stahl morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2.170 mm Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 230 mm bore stroke 120 mm morse taper 3 MK table: 400x320 mm turning speeds 105 - 1725 U/min total power requirement 1,2 kW weight 245 kg range L-W-H 470x810x1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing Nodpfxow U U N Ij Agnowc scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) Nsdpexablxefx Agnjwc - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: good (used), Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces Nwedjylhivjpfx Agnsc -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

Condition: good (used), Year of construction: 1992, functionality: fully functional, working range: 50 mm, Drill grinder capacity 50 mm Nedeviuzcepfx Agnjwc

Condition: good (used), Year of construction: 2000, machine/vehicle number: 152362081, functionality: fully functional, throat depth: 2,700 mm, spindle diameter: 110 mm, sheet thickness steel (max.): 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, Radial drilling machine MAS U 1000 Year of construction 2000 Conventional / digital control With face plate 1,000 mm and tool package Viewing is possible at any time by arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Radial drilling machine MAS | MAS1000 | U1000 Nwedpfsrwxpfex Agnec

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: well-maintained Point-to-point drilling machine Working width: 800 mm with grooving unit Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle in X-axis direction 1 drilling spindle in Y-direction Grooving saw unit in X-direction 3-axis control X: NC-controlled feed of workpiece via overlapping pneumatic clamping gripper Y: NC-controlled drilling movement Z: NC-controlled drilling depth adjustment Pneumatic roller hold-downs in feed area Pneumatic clamping gripper for transport DXF interface 15" color screen Keyboard including mouse Network card USB interface Nodpfxjw Tfxqs Agnowc Max. panel width: 950 mm Max. drilling width: 800 mm Max. processing width for back panel grooves: 600 mm Max. feed speed (X-axis): 30 m/min Max. drill bit diameter: 35 mm Max. total drill length: 70 mm Connected load: 2.5 kW Extraction port: 100 mm Required pressure: 6 bar Working height: 900 mm Machine dimensions (LxW): 1650 x 2100 mm Availability: Short-term Location: Solingen

Condition: ready for operation (used), Year of construction: 1993, type of input current: three-phase, number of spindles: 4, 4-spindle paper drilling machine with available accessories Njdpsynl Izefx Agnowc

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 Nwsdpfxjrfd Thj Agnjc tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: new, bore capacity in steel (diameter) 30 mm throat 260 mm bore stroke 135 mm spindle taper MT 3 MK table: 420 x 350 mm column diameter 135 mm turning speeds 125 - 3030 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 1,1 kW weight of the machine ca. 380 kg. Njdpfefv H H Asx Agnswc range L-W-H 0,9 x 0,55 x 2,2 mm High-quality drill press with a high speed range for the industrial use.

Condition: new, bore capacity in steel (diameter) 25 mm throat 185 mm bore stroke 50 mm spindle taper MK 3 spindle turning speed range 50 - 2500 U/min 178 mm 480 mm table surface area 700 x 180 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 160 t dimensions of the machine ca. 0,75 x 0,8 x 0,9 m Nwjdpfsd Sb Ayjx Agnec domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: used, length ca. 1500 mm width ca. 700 mm height over floor ca. 840 mm 2 St. With 2 drawers, interior height approx. 140 mm and 2 storage compartments, door height approx. 380 mm Nsdpfjylcqbox Agnjwc Mobile on casters, casters can be lowered so that the table remains stable when working

Condition: used, length 1200 mm Nsdpfx Agjylcp Donswc width 600 mm height 840 mm 6 St.

Condition: used, machine/vehicle number: 007968, Max. panel width: 300 mm Max. panel length: 2500 mm No of Bottom Units: 6 Nsdpswu Abajfx Agnswc Lateral horizontal groups: yes

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Nwsdpfxjyilgde Agnsc Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, Radial drilling machine Nwjdpfx Asw Dbgysgnsc Manufacturer: Valmer Model: TR 80/2500 SP Year of manufacture: 2006 Table dimensions: 1,000 x 800 x 560 mm Maximum drilling diameter: 80 mm Maximum tapping diameter: 42 mm Maximum spindle axis/column distance: 2,500 mm Minimum spindle axis/column distance: 500 mm Horizontal head travel: 2,000 mm Maximum distance spindle nose to working surface: 2,000 mm Minimum distance spindle nose to working surface: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg

Condition: good (used), Year of construction: 2018, Burning-Drilling System Sheet Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of Manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic turret Tool holder: 14 positions Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing: 5 to 40 mm Sheet size min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum finished part size: 80 x 80 mm Nodpfxsvzrczj Agnewc Sheet weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero position cross feeder Number of wagons: 2 clamps NC feed wagon, side-mounted 4 clamping jaws (2+2) 3 short stroke cross feeders Working height: 1,000 mm Discharge side: Discharge roller conveyor with lowerable unload table and chute into material collection container for unloading small parts. Filter unit incl. piping High performance for the use of carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and scribing LANTEK license ID: 25226 Availability: immediately!

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Nwjdpfx Aoym Ndqjgnec Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1993, Würth Fitting Drilling Machine Prebomat II Year of manufacture 1993 Complete in standard configuration with: Fully automatic pneumatic control in accordance with GS test, Oil brake and return stroke limiter for line boring, Electrical skip operation Motor 0.75 KW, 400 V, 1 stop ruler 900 mm Nedeymynyspfx Agnowc 2 extension rulers from 1.25 m to 2.5 m 4 swivel stops Worktable 1000 x 430 mm 4-spindle drilling head with pressure lever Pitch 25/5.5/32 mm 7-spindle drilling head for line boring, pitch 32 mm with integrated indexing pins

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Grinding wheel speed: 1400 rpm Drive motor: 400 V, approx. 1.5 kW Nwjdsx E Rx Uepfx Agnec Weight: kg Required space: 700 x 400 x 1100 mm

Condition: ready for operation (used), Year of construction: 2019, Grinding wheel diameter: 200 mm Nwedox E Rw Djpfx Agnjc Grinding wheel width: 32 mm Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Weight approx.: 34 kg Required space: 500 x 250 x 1150 mm

Condition: ready for operation (used), Year of construction: 2014, Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Nwjdpfx Agsx E Rxhenec Weight: 34 kg Required space: 500 x 250 x 1120 mm

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 910 kg, number of axes: 3, This 3-axis AGIE Drill was manufactured in 2005. It features worktable dimensions of 300 × 400 mm and travel capabilities of 300 × 200 × 300 mm. The machine is CNC controlled and has a power rating of 4 kVA. If you are looking to get high-quality drilling capabilities, consider the AGIE Drill drilling machine we have for sale. Contact us for further details. • Worktable dimensions: 300 × 400 mm • Voltage: 400 V • Frequency: 50/60 Hz • Power: 4 kVA Nwodpfx Agjyly Hgjnsc • Full load current: 5.7 A • Control: CNC controlled

Condition: excellent (used), Schechtl HBM 310 Nedpjymz Rijfx Agnowc The machine is equipped with: -a foot pedal -10 mm insert rail -a sheet metal support table (optionally also a back gauge) -Capacity: 1.0 mm steel sheet (1.50 mm aluminium, 1.25 mm copper, and 2.50 mm zinc) -Working length: 3100 mm -Weight: approx. 1,480 kg

Condition: used, Year of construction: 1992, functionality: fully functional, Planer table - SAC - FS365 Nwedpfx Agsyl Sm Sjnoc