Used Behringer for sale (87)

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight Kdodpfxsu U Narj Ag Ueg 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1983, cutting diameter 212 mm band length 350 mm Kedpsxd Dvbofx Ag Uedg weight of the machine ca. 450 kg range L-W-H 1200 x 1100 x 1200 mm Furnishing: - manual vice - miter adjustment ü. vice - coolant device - roller block

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range Kdsdpfjxab R Usx Ag Ueg * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Kdjdpfogb Eg Hex Ag Ueg -Hydraulic cylinder: from automatic band saw Behringer HBP -Piston rod: Ø 22 mm -Stroke: 445 mm -Admission piston rod: M12 -Dimensions: 605/100/H85 mm -Weight: 8.7 kg

Condition: good (used), Tensioning device for automatic band saw, saw band rollers, saw band guide -Holder, from Behringer HBP automatic band saw -Bore: Ø 80 mm Kodpfx Aegcct Rjg Ujdg -Dimensions: 380/140/H50 mm -Weight: 8.2 kg

Condition: good (used), Clamping device for automatic band saws, saw band rollers, saw band guide -Saw blade guide, from Behringer HBP HBP360A band saw machine -Price: complete -Dimensions: 460/70/H505 mm Ksdpfx Aogccunog Uodg -Weight: 28.6 kg

Year of construction: 1997, condition: used, Clamping device for automatic band saw, hydraulic double vice, saw unit mounting, feed, material positioning -Upport saw unit: from automatic band saw Behringer HBP 360 A -Stroke: 675 mm -Shaft: Ø 40 mm -Measurements: see photos -Dimensions: 720/1545/H220 mm -Weight: 236 kg Ksdpfxegbvnno Ag Uodg

Year of construction: 1997, condition: used, Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm -Measurements: see photos Kedjgbvnvopfx Ag Uodg -Dimensions: 400/1130/H665 mm -Weight: 192 kg

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 1290259, type of input current: three-phase, overall weight: 5,900 kg, Behringer bandsaw with extensive documentation. Inspection possible by appointment in 47809 Krefeld. Kdsdpjx Tp Scsfx Ag Ujg

Condition: used, Year of construction: 2007, Behringer HBM 540 A automatic band saw year of construction 2007 Working area flat 630x540 Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min 2x infeed roller conveyor driven 6200mm width 1200mm each with cross feed Discharge roller conveyor 5030mm driven chip conveyor The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals Kjdpfx Aowi Ii Sog Usdg

Condition: good (used), Capacities: Capacity 360 mm diameter , Rectangular 704 x 360 mm at 90 degrees or 340 mm diameter , Rectangular 400 mm x 340 mm at 45 degrees. Kodpfx Ajig T Abeg Ujdg Input 415/3/50 4kw approx. Speeds 20-120 meters per min. Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head. Infeed / Outfeed powered rollers. Infeed / Outfeed Cross transfers

Condition: used, Year of construction: 2012, Maximum bar length..... 15 meters Maximum bar weight..... 300 kg/m Dimensions and profile types Punching 34 tons Shearing 130 tons Minimum Maximum Maximum in shearing IPE 80 200 200 IPN 80 200 200 Angles 35 x 3.5 120 x 12 120 x 12 Kodpfx Aowum Tmjg Uedg UPE 80 200 200 UPN 80 200 200 UPAF 80 200 200 Flats 35 x 5 200 x 12 200 x 12 Maximum punching diameter (steel 400 N/mm²)..... Ø 32 mm in 8 mm thickness Maximum diameter in Maximum thickness (400 N/mm² steel) ..... Ø 22 mm in 12 mm thickness Number of punching diameters ..... 1 in the web and on the horizontal flange of the angles 1 in the reference flange on the vertical flange of the L and U sections 1 per half reference flange on the flange of the I and H sections

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Kdjdpfx Asu Nit Reg Ueg Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Year of construction: 1980, condition: used, work piece width 250 mm Kodexyaghepfx Ag Uodg workpiece height 35 mm bore diameter 2 mm

Condition: good (used), Year of construction: 2009, machine/vehicle number: 10014344, Offer 25481 Technical Data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Maximum opening width of pneumatic vice: 205 mm - Cutting capacity with saw blade diameter 350 mm: - at 90° round: 120 mm - square: 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45° round: 100 mm - flat: 100 x 100 mm - Mitre adjustment: left up to 45°, right up to 45° and 30° - 2 saw blade rotational speeds: 17 and 34 rpm - Drive: 400 V / 1.4 / 1.9 kW - Air connection: 6 - 8 bar - Micro-spray coolant system Kodpfx Ajx Tqnfjg Usdg - Space requirement approx.: W 850 x H 1750 x D 950 mm - Weight approx.: 400 kg

Condition: refurbished (used), Year of construction: 2008, used automatic band saw Brand: Behringer Model: HBM 540 A Year 2008 Serial number: 608272 Round cutting capacity: 540mm Rectangular cutting capacity: 630x540mm Smallest material size to be cut: 50mm round / 25x25 square Minimum cutting length: 10mm Residual length in automatic: 40mm Cutting speed: 15 - 150m/min. Main motor power: 11KW (Total connection power: 16KW) Fuse protection: 50A / Wiring section: 4x10mm2 Weight: 5100kg OPTIONALS INCLUDED: - Chip extractor with high height - Centralized lubrication - 11kw motor Kdedpfx Ajhzbkfjg Usg It has a complete operating manual in Spanish.

Condition: ready for operation (used), Behringer automatic metal bandsaw, electrically controlled stop, infeed side 15 m, outfeed side 7.5 m Kdsdpfow Tri Aex Ag Ujg

Condition: used, Saw BEHRINGER HBE321 A Dynamic Kdedpfx Aox Tvkxog Ueg

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Kdodpfxou Niuhs Ag Uog Coolant system with pump *

Condition: used, Year of construction: 1982, Technical details: cutting diameter: 120 mm dimensions of saw-blade: 425 x 30 mm cutting range 90 degrees: round: 120 mm height over floor: 800 mm electrical connection: 380 V / Hz. Kjdpfx Aju Nilajg Uedg strokes per minute: 60 / 92 / 140 Hübe/min. total power requirement: 1,5 kW Overall size: ca. L:1,2 x B: 0,75 x H: 1,10 (Bügel angehoben) m Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the saw blade remains in the lowest position. Workpiece holder via fixed jaw and clamping jaw, with hand crank Coolant device in the base limit stop *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm Kdodpfeu Niuzex Ag Ujg cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: new, Available from stock / short-term delivery! Speed: 17 / 34 rpm. For saw blades up to 350 mm diameter. Equipped with a pole-changing three-phase motor, 1.4/1.9 kW. Stationary base frame with built-in coolant system and chip drawer. Cutting capacity: Flat 90°: 170 x 100 mm Flat 45°: 120 x 100 mm Flat 30°: 85 x 100 mm (right side only) Square 90°: 100 mm Square 45°: 95 mm Square 30°: 85 mm (right side only) Round 90°: 120 mm Kedpfx Aollvpwsg Uodg Round 45°: 120 mm Round 30°: 100 mm (right side only) Technical Data: Length: 895 mm Width: 665 mm Height: 1750 mm Weight: 300 kg Support height: 900 mm Options: Roller conveyors and length measuring systems (image is for illustration purposes only, available in manual and automated versions upon request) We recommend our proven coolant concentrate for 'Eisele' saws, our micro-spray oil (for machines with micro-spray equipment), as well as high-quality circular saw blades and band saw blades tailored to your specific needs. Contact us for a non-binding enquiry!

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: from Behringer HBP automatic band saw -Piston rod: Ø 22 mm -Stroke: 310 mm -Piston rod mounting: M12 -Dimensions: Ø 55 x 480 mm -Weight: 4.6 kg Kodpfxsgb Egbs Ag Uodg

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), General Data Machine weight 3000 kg This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. Kdodpfx Agox D N Ams Ueg Application Types Sawing

Year of construction: 2014, operating hours: 5,900 h, condition: ready for operation (used), General Data Measurements width 3100 mm Measurements depth 1850 mm Measurements height 2600 mm Machine weight 2800 kg This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine. Application Types Sawing Kdedpex D H A Djfx Ag Ueg