Used Behringer Hbp 220 A for sale (80)

Condition: used, Year of construction: 2014, machine/vehicle number: 0102-260015, The Behringer HBE 261 A Dynamic automatic band saw is a fully hydraulic, cost-effective, high-performance band saw designed for automated 90° cuts in industrial manufacturing. Nedozfw Dhepfx Ahuocw This Behringer band saw is ideal for the safe, precise cutting of structural steel sections as well as difficult-to-machine solid metal materials and comparable solid plastics, in both manual and automatic modes. The HBE 261 A Dynamic automatic band saw has a cutting range of 10 mm to 260 mm for round material and 10 x 8 mm to 300 x 260 mm for flat material, with a saw blade size of 4.440 x 34 x 1.1 mm. The frequency-controlled band saw drive has a drive power of 2.6 kW and a continuously variable cutting speed of 15–110 m/min. The cutting speed can be set and read on the control panel. The total drive power is approximately 3.7 kW. The machine features optional equipment such as a chip conveyor, central lubrication, a line laser, electronic monitoring of the minimum speed, an LED worklight, a spray gun for chip removal, a cutting display with error diagnosis, and a roller conveyor system on the infeed and outfeed sides.

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Ncodporz Rw Rofx Ahusw Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: ready for operation (used), Year of construction: 1996, Maximum shaft diameter (bevel cut, 90 degrees) 350 mm Machine height 1300 mm Machine width 2200 mm Machine length 2000 mm Nodpfxezg Nr Tj Ahujcw Machine weight 1.4 t

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Ncodpsvdk A Eefx Ahuew Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 1982, cutting diameter 200 mm band length 350 mm capacity 90 degrees: round 200 mm total power requirement 3,0 kW weight of the machine ca. 0,45 t dimensions 1,4 x 1,4 x 1,3 m Automatic hacksaw - with 1000 mm infeed roller conveyor - preset counter - material stop with trigger, max. 600 mm - coolant system Ncjdpfx Aoy N D H Hjhujw

Condition: good (used), Year of construction: 2001, machine/vehicle number: 201224, functionality: fully functional, cutting speed: 110 mm/min, Used band saw Type: Semi-automatic *This machine was initially automatic, it has been modified to be semi-automatic. Cutting capacities: 90º round, 15º left-right, 30º left-right, 45º left-right: 410mm. Nedsuc Tpajpfx Ahuocw Square at 90º: 850x400mm Square at 15º left-right: 800x400mm Square at 30º left-right: 700x400mm Square at 45º left-right: 550x400mm Minimum cutting capacity: 10mm / 10x8mm Minimum cutting length: 35mm Cutting speed: 17-110m/min. Drive motor power: 7.5kw Hydraulic pump motor power: 5.5kw Actions from control panel: Rotation to degrees. Saw drive Drive forward and backward the feed rollers. Raise and lower clamp clamps. Open and close clamp Machine being overhauled. Request operating video.

Condition: used, machine/vehicle number: 10000886, functionality: fully functional, empty load weight: 1,600 kg, Technical data Working range - Æ/ flat at 90° 800 mm / 1300 mm x 750 mm Working range - Æ / flat at 75° + hpr. 800mm / 1150mm x 750mm Working range - Æ / flat at 60° + hpr. 800mm / 1000mm x 750mm Working range - Æ / flat at 45° left 600 mm / 800 mm x 600 mm Smallest material dimension Æ / flat 30 mm / 20 mm x 20 mm Smallest cutting length (90°) 35 mm Cutting speed range 17 - 120 m/min System pressure event. belt tensioning 95 bar Belt drive power 11 kW Hydraulic pump motor power 5.5 kW Cooling pump motor power 0.12 kW Power supply motor 0.09 kW Total power input - approx. value approx. 28 kW Voltage 400 V, 50 Hz Control voltage / voltage at hydraulic valves 24 V = (DC) Current rating approx. 38 A Ncsdpfxswqlltj Ahusw Protection 58 A Cable cross-section min. 4 x 16 mm² Dimension of saw blade see title. page Weight (net) 1600 kg Mat flow height - working height 830 mm Length x Width x Height see base plan

Condition: new, Year of construction: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia. The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life. By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing. Available models: - HBE261A Nedpfx Aeiy Rc Rshuecw - HBE321A - HBE411A - HBE511A

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Nsdjw Tulgjpfx Ahuscw Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Coolant pump / minimum quantity spray device Pneumatic material clamping Nedpfx Ahjznxg Neujcw Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 Ncjdpfx Ahsy R Tk Rsuew 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: from automatic band saw Behringer HBP -Piston rod: Ø 22 mm -Stroke: 445 mm Ncjdpfsgb Eg Hjx Ahujw -Admission piston rod: M12 -Dimensions: 605/100/H85 mm -Weight: 8.7 kg

Year of construction: 1997, condition: used, Clamping device for automatic band saw, hydraulic double vice, saw unit mounting, feed, material positioning Nodpfx Asgbvnnjhuscw -Upport saw unit: from automatic band saw Behringer HBP 360 A -Stroke: 675 mm -Shaft: Ø 40 mm -Measurements: see photos -Dimensions: 720/1545/H220 mm -Weight: 236 kg

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. The machine will arrive at the end of August and will then be refurbished. Ncodpfozhki Aox Ahuew The photos show the original condition.

Condition: used, Year of construction: 2012, Technical data: Cutting range round / square / rectangular ø: 400 / 350 x 350 / 380 x 300 mm Saw blade dimension: 650 x 50 x 2.5 mm 3 stroke speeds: 40 / 62 / 90 strokes/min Drive power: 3.0 kW Footprint (WxDxH), approx.: 1800 x 650 x 1250 mm Weight, approx.: 1050 kg Equipment: - 3 stroke speeds - Infinitely variable cutting pressure adjustment - Minimum quantity lubrication - Pre-tensioned plate guide for the saw frame - Dustproof enclosed gearbox - Accelerated return stroke of the saw frame - Enclosed oil hydraulic system - Coolant device - Limit switch - Automatic lifting of the saw frame - Miter device up to 45° - 1 new saw blade Ncjdpjydittjfx Ahujw

Condition: good (used), Year of construction: 2002, Saw blade diameter: 350 mm Cutting capacity: Round: 120 mm Square: 100 x 100 mm Rectangular: 170 x 100 mm Ncodpfxjy Uv Its Ahuew 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Space required approx.: 800 x 700 x 1770 mm

Condition: good (used), functionality: fully functional, Type: SUPER 215 PU Technical data: Cutting range: Circular: 215 mm Flat: 210 x 180 mm 4 speeds Blade length: 350 x 30 x 2 mm Njdpfxszfy Rds Ahuocw

Condition: new, Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Machining cross section max. round at 90° 120 mm Machining cross section max. rectangle at 90° 170 x 100 mm Machining cross section max. round at 45° 120 mm Machining cross-section max. rectangular at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Ncsdpfx Aey S Eytohuew Bore diameter 40 mm Adjustable saw blade speed 17 rpm / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm Ncedpfxju Nit Re Ahusw saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Year of construction: 1982, Technical details: Nedsu Nilaepfx Ahuocw cutting diameter: 120 mm dimensions of saw-blade: 425 x 30 mm cutting range 90 degrees: round: 120 mm height over floor: 800 mm electrical connection: 380 V / Hz. strokes per minute: 60 / 92 / 140 Hübe/min. total power requirement: 1,5 kW Overall size: ca. L:1,2 x B: 0,75 x H: 1,10 (Bügel angehoben) m Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the saw blade remains in the lowest position. Workpiece holder via fixed jaw and clamping jaw, with hand crank Coolant device in the base limit stop *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar Nsdpfxou Niuzj Ahuscw electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: good (used), turning diameter over cross slide: 350 mm, spindle bore: 50 mm, turning diameter: 600 mm, center height: 1,000 mm, Behringer lathe with a wide range of accessories. Ncsdpjzg Aywsfx Ahuow

Condition: used, Year of construction: 1985, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,250 mm, total length: 1,800 mm, total width: 650 mm, overall weight: 1,000 kg, cutting range flat at 90° (X-axis): 400 mm, cutting range flat at 90° (Y-axis): 400 mm, cutting range round steel at 90°: 400 mm, saw blade length: 650 mm, Cutting capacity round: 400 mm Cutting capacity square: 400 x 400 mm Cutting capacity rectangular: 380 x 300 mm Ncodpfx Asymdizohusw 3 stroke rates: 40/62/90 strokes/min Saw blade dimension: 650x50x2.5 mm

Condition: used, Year of construction: 2005, serial number 1106479 400 Ncjdpjyn R Nqsfx Ahuow miter ja cooling ja

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar Nsdpfxexpd D Nj Ahuscw