Used Bearing Resolution for sale (3,756)

Condition: good (used), Support bearings for Union Boring mills BFT80 and BFT 80/2 with fixed face support -short version -for spindle diameter 80mm Bledpscw Sthjfx Abbor

Condition: new, NEW VARIOUS BEARINGS SET + PRESSURE GAUGES Bodpfx Aswq Rmisbbjlr

Condition: new, overall weight: 12 kg, Year of construction: 2012, machine/vehicle number: H221647NA 903A1, Timken® bearings are characterized by high accuracy, innovative geometry of internal surfaces and high-quality materials. Our (tapered roller bearing) housing bearing units ensure high performance and operational reliability. Timken® tapered roller bearings support both lateral and thrust loads, even under the most severe operating conditions. The Timken H22167NA bearing unit has specially designed geometry, engineered surfaces, and special sealing solutions. The price is for one set. Bljdpfx Ajd Ev Hxobbsr

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 11516, workpiece weight (max.): 10,000 kg, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 700 mm, empty load weight: 19,500 kg, Submitting a bid obligates you to collect the machine on time on 15.12.2025! The original purchase price of the machine was EUR 400,000! TECHNICAL DETAILS Travel X–Y: 2,000 x 1,300 mm Travel Z: 700 mm Travel U–V: 500 x 500 mm Maximum workpiece dimensions (X, Y, Z): 2,450 x 2,000 x 700 mm Maximum workpiece weight: 10,000 kg Taper cutting angle 400 mm: ±30°/400 mm Taper cutting angle 600 mm: ±20°/600 mm Position resolution (X, Y, U, V): 0.001 mm Minimum programmable increment: 0.001 mm MACHINE DETAILS Machine weight: 19,500 kg Blsdpfx Absxy Rxuobsr

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 762 mm, resolution (max.): 600 dpi, machine/vehicle number: 63507120672, production capacity: 40,000 unit/h, Submission of a bid obliges the buyer to collect the item within the stipulated period, no later than 31/12/2025! TECHNICAL DETAILS Printing technology: Inkjet Number of print units: up to 4 Number of ink cartridges: 12 Print resolution: 600 dpi Print speed: 40,000 addresses/hour Print area: 762 × 152 mm Paper formats Min. paper size: 85 × 40 mm Max. paper size: 762 × 520 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 1,476 × 58 × (810 – 915) mm Weight: 131 kg Bjdpfxoxyf E As Abbolr EQUIPMENT Feeder for filled envelopes or finished brochures Double tabber for sealing self-mailers or applying labels Vacuum transport belt Direct printing system with 6 print heads (IR possible) Belt delivery at a 90° angle

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 200 mm, workpiece height (max.): 130 mm, TECHNICAL DETAILS Workpiece Dimensions Max. workpiece length: 3,200 mm Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Table height for profiling: 850 mm Feed roller diameter: 100 mm Distance between feed rollers: 150 mm Crosscut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Milling Unit for Tenoning High-performance spindle with upper bearing: Diameter 50 mm, length 620 mm Motor power: 7.5 kW Bledjxx Un Repfx Abber Speed: 3,500 rpm Max. tool diameter: 320 mm Axis travel below work table: 575 mm Milling Unit for Profiling Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./max. tool diameter: 130 - 250 mm Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool positions: 24 Max. weight per tool: 10 kg EQUIPMENT Automatic chip protection Jolly Automatic brake RAPID 24 automatic tool changer Fast vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Condition: excellent (used), Year of construction: 2005, operating hours: 4,900 h, functionality: fully functional, turning length: 730 mm, turning diameter: 545 mm, spindle motor power: 11,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, feed length X-axis: 410 mm, feed length Y-axis: 140 mm, feed length Z-axis: 570 mm, total height: 3,100 mm, total length: 5,180 mm, total width: 2,550 mm, spindle nose: A6, overall weight: 9,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, 2005 Mazak Integrex 100-III S CNC Mill-Turn Lathe – Fully Equipped with Automation – Low Hours🔹 Make: Mazak Model: Integrex 100-III S Machine Type: CNC Mill-Turn Lathe with Automation Year: 2005 Control: Mazatrol 640MT Pro Production Hours: 4869hrs Condition: Very Good We are pleased to offer this 2005 Mazak Integrex 100-III S, a high-precision CNC mill-turn center built for multi-tasking performance. Fitted with the powerful Mazatrol 640MT Pro control and only 4869 production hours, this machine delivers versatility, speed, and accuracy with minimal wear. Ideal for complex part machining, this machine features main and sub spindles, B-axis milling head, and a GL50F gantry loader for automated part handling, increasing your throughput without sacrificing precision. 🔧 Key Specifications: Max Turning Diameter: 545mm Max Machining Diameter: 350mm Max Turning Length: 730mm Bar Capacity: 52mm Main & Sub Spindle Power: 11kW each Main/Sub Spindle Speed: 6000rpm C-Axis Resolution: 0.001° indexing Milling Spindle: 5.5kW / 12000rpm B Axis Range: 225° Tool Changer: 40 ATC stations Tool Capacity: 4kg, 200mm length, 90mm diameter Control: Mazatrol 640MT Pro Tool Taper: KM63 🧰 Machine Travels: X1: 410 mm | Y1: 140 mm | Z1: 570 mm X2: 220 mm | Z2: 780 mm W-Axis: 790 mm ⚙️ Included Equipment: GL50F Gantry Loader with infeed/outfeed conveyors Automatic door for improved workflow Selection of tool holders FSE Swarf Conveyor OMF 1000 Filter System FSE Coolant Filtration & Sump Pump Chiller unit for thermal stability 📐 Footprint & Weight: Dimensions (excluding gantry): 2600 x 2200 x 2500mm Weight: 7,600kg 🚀 Why Choose This Mazak Integrex 100-III S? Low hours – only 4869 hours of production Fully automated with gantry loader Clean, well-maintained, and in very good condition High-end specs for multi-process machining Ready to go – excellent choice for job shops or high-mix/low-volume manufacturers *Specifications are given in good faith but not guaranteed* Mazak Integrex 100-III S for sale Used Mazak CNC lathe Bledpfx Aboxyy Ixjbor CNC mill-turn lathe with gantry loader Mazak Integrex Irish dealer Mazak 100-III S specifications CNC turning center with automation Used CNC lathe 2005 Mazak Mazatrol 640MT Pro machine CNC lathe with sub spindle Mill-turn lathe with B-axis

Condition: excellent (used), Year of construction: 2020, Micro Vu Excel 502UC Optical Precision Measurement System Scale Resolution 0.1 µm. 'XY' Accuracy 2.8+L/200. 'Z' Accuracy 3.0+L/100. Zoom Ratio (Optical, Digital) 36x (12x, 3x). On-Screen Zoom Range 15x - 540x To 30x - 1080x. Capacity 500 x 400 x 250mm. With 4 Station Probe Rack, Calibration Sphere, Surround Guarding, Joystick Control, Monitor, Keyboard & Mouse. Machine Dimensions L1,200 x W1,100 x H1,650mm. Weight 900kg. S/No.EC502UC01461 (01/2020) Bledpfex Ag I Dsx Abbor

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Bjdpfx Abox Ardwjbjlr A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 1193, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,549 kg, repeat accuracy: 0.003 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the item by 16/01/2026! TECHNICAL DETAILS Blodsxy Rtrepfx Abber Maximum permissible workpiece weight: 25,000 N Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,000 mm Measuring resolution: 0.001 mm Straightness of guideways Straightness X-axis max.: 0.010 mm Straightness Y-axis max.: 0.010 mm Straightness Z-axis max.: 0.010 mm Repeatability: 0.003 mm Travel speed: stepless, 4.2 m/min MACHINE DETAILS Dimensions & weight Space requirement (L x W x H): 3,600 x 3,600 x 4,500 mm External dimensions (L x W x H): 2,590 x 2,280 x 4,080 mm Machine weight: 8.5 t

Condition: ready for operation (used), Year of construction: 1999, Two Maka Machines: Bledpoxwux Tjfx Abbsr Year: 1999 · Machine No: 422 799 Key specifications Model: MAKA KPF 334R Control: BWO 900C CNC (integrated PC, ~1 MB memory) Working area: X = 1,000 mm, Y = 1,000 mm, Z = 300 mm (fixture height ~120 mm) A/B axes: A = 540°, B = ±100° (200° total) Rapid traverse: X/Y = 45 m/min, Z = 15 m/min, A/B = 10,000°/min Spindle: HSD high-speed spindle — 6.8 kW, 2,000–24,000 rpm, ceramic bearings, air-cooled (nominal power from 12,000 rpm) Tooling: SK30 spindle taper; 10-place drum tool magazine (tools up to Ø60 mm, length ≈130 mm depending on diameter) Table: Aluminium work table ~1,000 × 1,000 mm (T-slots / grid) Vacuum: Vacuum clamping system (vacuum pump spec commonly listed as ~54 m³/h on similar units) Lube: Central automatic lubrication system Electrical: 400 V, 50 Hz (verify on site) MAKA KPF 334 RT – 5-Axis CNC Machining Centre Year: 1999 · Machine No: 422 799 Key Specifications – MAKA KPF 334 RT Working travel: X ≈ 2,750 mm · Y ≈ 2,400 mm · Z ≈ 700 mm A-axis rotation: ~540° · B-axis swivel: ~200° Rapid traverse: X/Y ~40 m/min · Z ~15 m/min · A/B ~10,000°/min Dual work tables: ~1,000 × 1,000 mm each (coupleable) Control system: BWO 900 / BWO 900C CNC Spindle: High-speed milling spindle (eg ~27,000 rpm capacity) Tool magazine: Multi-station drum (tools up to Ø60 mm / L approx 130 mm, check actual) Vacuum clamping system & automatic central lubrication Electric: 400 V / 50 Hz (buyer to verify local connection)

Condition: used, REPEATED ITEM Garner Denver maybe Elmo Rietschle V-VTA 80 vacuum pump V-VTA pumps developed by Elmo Rietschle for continuous operation for printing and paper handling machines. V-VTA pumps come with bearings on both sides of the rotor. Flange mounted motor with bolt coupling. V-VTA offers high efficiency, silent operation, easy to operate and service. Sound cover allows a ducted cooling air outlet either from one side only or from both front and back. Also infomration on this site SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFPR017 Bsdexziatopfx Abbslr Listing name: GARNER DENVER VTA 80 C 100 Vacuum Pump

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Bedpfx Absxyungjbslr Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control.

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm Bedpfx Absxp Nfxebelr TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Blsdpfx Aox Arc Hsbbor

Condition: used, Year of construction: 2017, Field of application: Mining Bjdsx Au Aispfx Abbelr Empty weight: 1.250 kg Manufacturer: Tietjen Type: NDK 5.2-S Year: 2017 Type : Hammer mill Applications : Designed for wet shredding of bulk food and agricultural products, Motor type : hydraulic Frame and rotor in stainless steel 304, 1.4301. Weight (excluding motor): 1250 kg Injection nozzles for liquids Bearing temperature monitoring Pneumatically operated inlet flap

Condition: used, Year of construction: 2013, Robotic system consisting of: 1 welding robot Qirox QRH 390 incl. control unit, programming hand device, 24 V buffering, PC-side computer interface, 2 GB flash drive Gas nozzle sensor, arc seam tracking, point editor, Bsdpfx Absx Atp Iobolr Qineo Puls 450 with Premium control module, wire feeder, torch hose package, welding torch, torch testing gauge, mechanical cleaning, pressure booster, Floor-mounted track 10 kN, travel length 8 m, robot installed in upright position on base pedestal. Wire drum travels with the system. 4 positioners with counter bearing WP-TC 10 kN, load capacity 1,000 kg, clamping length 3.0 m, rotation radius 1 m Connection control, 4 light barriers, 4 prestart selectors, Delivery: immediately available. Special price for purchase by 15.12.2025! System will be cleaned, tested, and serviced prior to dismantling. Warranty: functional guarantee Very low operating hours

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Bljdpfox Arcysx Abber

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Blsdpfx Abex Athwjber Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Blodpfx Aex Arcgebber Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, Year of construction: 2014, total height: 1,700 mm, total width: 750 mm, total length: 950 mm, Voltage: 220 Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Bljdpfox Atgtjx Abbsr Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: new, Year of construction: 2025, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Bodpfxsx Arb Ns Abbelr

Condition: used, power: 11 kW (14.96 HP), Field of application: Mining Manufacturer: Forplex Model: FL2 Year: +/- 1985 Type: Hammer mill / Fine impact mill Materials: stainless steel Motor power: 11 kW (1500 rpm) Rotor: hammer plate Hopper Bag filter Maximum filtration air flow: 1200 m3/h Minimum filtration surface area required: 8m2 Refurbished by our teams: - Seals: new - Mill bearings: new - Motor and mill pulley: new Bodpjx Akd Njfx Abbjlr - safety device: key + lock + electrical box case: new (Allen Bradley Guardmaster) Static load: 240 kg Dynamic load: 720 kg

Year of construction: 2025, operating hours: 5 h, condition: new, functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Bjdpfx Ajx Arb Ajbbjlr Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. This machine is in stock at our warehouse in the UK.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 15,500 kg, rotor diameter: 800 mm, rotor width: 2,000 mm, power: 250 kW (339.91 HP), rotational speed (max.): 480 rpm, Equipment: rotational speed infinitely variable, Genox GXC2000G Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 250kW Drive Motor with outboard rotor bearings (200kW - 315kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 2,000mm wide x 800mm diameter cutting chamber with a choice of either a 5, 7 or 9 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. Bljdpex Arbpjfx Abbsr We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.