Used Beam Profiler for sale (8,691)

Condition: used, tank capacity: 14,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Insulation around top head and cylinder, not around bottom head; spray head connection slightly bent and weld seam on the top head cracked; discharge pipe internal diameter approx. 50 mm, widens towards its cut-off end to approx. 65 mm Speed: 13 / 26 rpm External diameter: 2,700 mm Internal diameter: 2,480 mm Total height: 4,100 mm Insulation: present Power: 1.5 / 2.2 kW Agitator: beam agitator Agitator component: agitator flange Type of stand: height-adjustable feet Location: Bremen Volume: 14,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,350 mm Last application: Dairy TANK Number of feet: 4 pcs INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: in cylinder (approx. 350 x 450 mm) Outlet: present MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 2 Agitator arrangement: side-mounted on cylinder AGITATOR 1 Voltage: 400 Volt Bottom bearing: Dedexqc S Uspfx Acwour

Condition: used, Year of construction: 2004, tank capacity: 8,000 l, GENERAL Equipment: Crane lugs Design: Vertical Year of manufacture: 2004 Outside diameter: 2,200 mm Total height: 3,700 mm Insulation: Present Agitator: Beam agitator Location: Outdoor storage Nameplate: Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Dujdpfx Ajyciwiocwer TANK Support type: Height-adjustable feet INSULATION Insulation jacket: Hermetically welded FEATURES Manhole / Dome: In the top head Outlet: Present AGITATOR Agitator arrangement: Eccentrically mounted in the top head

Condition: used, tank capacity: 10,000 l, GENERAL Equipment: Crane lugs Design: Vertical Insulation: Available Agitator: Beam agitator Djdjyciwpepfx Acwour Location: Outdoor storage Nameplate: Volume: 10,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: Used TANK Support type: Height-adjustable feet Number of feet: 3 pcs INSULATION Insulation jacket: Hermetically welded EQUIPMENT Manhole / Dome: In the upper head Outlet: Present AGITATOR Bottom bearing: Agitator arrangement: Eccentric in upper head

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Features: Air/ventilation system, disc valve Design: vertical Dusdpfx Aexqc S Iscwsr Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Venting, spray head, crane lugs Design: Upright Outer diameter: 3,880 mm Inner diameter: 3,700 mm Total height: 9,200 mm Insulation: available Agitator: Beam agitator Base type: Skirted base Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous application: Food TANK Bottoms: Conical bottom EQUIPMENT Manhole / dome: in the shell Dusdpfx Acjx Dmcqowsr AGITATOR 1 Bottom bearing: Agitator arrangement: eccentric on top head

Condition: used, amplification -fold ? diameter 380 mm workpiece height max. 200 mm voltage 230 V Dujdpogbgd Tefx Acwsr weight of the machine ca. 245 kg dimensions of the machine ca. 0,80 x 1,20 x 2,00 m - Serial-No.: 1740

Condition: good (used), Schlebach Mini Prof Plus profiling machine Dedpeyzfpyefx Acwjur The machine is equipped with: - RS manual roller shear for cross-cutting - Electromechanical length measurement - 400V connection

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Three unused rasps Extraction connection 80 mm Waldmann mounted work light Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. Dujdpjw Iqvqofx Acwsr The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Dsdpsyvhbnefx Acwour Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, SOLD ROUNDO (Sweden) electro-hydraulic section bending machine Model: R-3 Capacity: 14 cm3 Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-7-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1,300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Includes: Brake motor Push-button control Dujdpfx Asxl Sq Ascwer Digital read-out 1 extra set of rolls for pipe Ø 48 and Ø 42 mm Dutch-language manual Price of the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has seen very little use! Delivery conditions: Delivery time: ex stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe specializing in trading and stocking mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for our current stock list. We assemble and/or disassemble these systems in a safe manner with VCA-certified technicians, and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Duodpsyx Dwkofx Acwjr Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim Dujdjwwwkhspfx Acwer

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation Dsdpfx Aoyxpawecwjur - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Dsdjdx Nfwspfx Acwsur Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Djdped Tt Atofx Acwsur Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Djdpfeyx Dz Nsx Acwour Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Djdpfsyx Dx Isx Acwour Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new Remark: Very few operating hours

Year of construction: 2020, operating hours: 1,288 h, condition: excellent (used), functionality: fully functional, 4-axis CNC profile machining center For economical and efficient machining of aluminum and thin-walled steel profiles Standard version equipped with air-cooled milling spindle (optionally available with water-cooled milling spindle) All machining operations, such as milling, drilling, and thread tapping, are performed on a stationary clamped profile. Stepless machining between -90° and +90° with any available tool Automatic clamp adjustment with absolute measurement system The traveling tool magazine ensures short tool change times for optimal machining cycles. The magazine can hold up to eight tools. For double profile and end machining, a maximum of two swiveling angle milling heads are available, each with two different tools (0°–90°–180°–270°) (optional) Two separate machining zones for pendulum operation (optional). Area safeguarding is provided by a laser scanner on the operator side for maximum safety and easy machine accessibility. 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system with eluCam Dsdpfx Acewxmdtswjur SBZ 140 – 7.6 m Max. machining length with end machining: 7,600 mm Max. machining length without end machining: 7,720 mm

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm Dodpfodp U Apox Acweur space requirement: 1000 x 770 x 690 mm hand-guided

Year of construction: 1976, condition: used, machine/vehicle number: 40 127 76, span the range of around: mit Spannfutter 115/48 (not available) 3 - 42 mm this maximum clamping: 345 mm span the range of around: mit Spannfutter 115/56 (not available) 5 - 50 mm this maximum clamping: 95 mm Dodo Sxnpepfx Acwour cutterhead speed: (RM 4) 740 - 1700/(ME 4) 580 - 1160 Upm spindle drive: 3 kW hydraulic drive: 4 kW space: Maschine 2100 x 1380 x 1880 mm weight: ca. 2000 kg

Condition: used, Field of view on the objective at 50 x: 11.2 x 9.2 mm Field of view on the objective at 100 x: 5.6 x 4.6 mm Projection area: 560 x 460 mm Objective stage size: 230 x 165 mm diameter of the glass table: 80 mm Weight approx.: 230 kg Dedjb Nxl Ijpfx Acwsur Space requirement: 1030 x 780 x 1800 mm

Year of construction: 1973, condition: used, machine/vehicle number: 8530, screen size: 500 x 500 mm Duodj T Apyjpfx Acwer visual field: 100 mm Ø dimensions: 620 x 1020 x 1650 mm weight: approx. 250 kg

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Notching stroke adjustable: 0 - 60 mm Dodpjnacy Tofx Acwour Hydraulic drive: 380 V, 3 kW Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm Djdstx Uqaepfx Acwsur square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Duodpsy Aafxofx Acwjr