Used Bas 500 Dnb for sale (15,928)

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, overall weight: 1,410 kg, input frequency: 50 Hz, nominal power (apparent): 500 kVA, type of output current: three-phase, Equipment: type plate available, 6 months warranty Djdpfx Acjwnfx Uexjup

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6, raw/white - Load capacity: 500 kg - Colour: RAL color of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Additional configurations available. Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to area, load-bearing capacity, platform height, and intended application. Our planning department will prepare a custom, non-binding offer for you based on your specifications. Whether new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipment is available at an additional cost. The extra costs depend on the place of delivery and the size of the consignment, and can be specified individually on request. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is to be understood as unit/net price or as stated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US The company DLK, located in Nordhorn, deals in new and used products for warehousing logistics, conveying technology, mezzanine floors, textile storage solutions, as well as in machinery for commerce, industry, and craft trades. Duedexpiztopfx Acxsp We constantly offer attractive used machines from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us at any time. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers Djdewkf Ihopfx Acxsup - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Dusdpoxqr D Tefx Acxep

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Duodswbknbjpfx Acxep We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages Djdpfx Acjxmrwfexjup • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: excellent (used), Year of construction: 2024, CNC MECOF 2 PCS . YEARS OF MANUFACTURE 2005 AND 2007.They are in very good working condition. Duedpfx Acet E Nynjxep

Condition: used, Year of construction: 2003, functionality: fully functional, Mazak Quick Turn Nexus 150/500 YOM 2003 Mazatrol PC Fusion Control Mazak Tool Length Measuring System Serial Number 166285 Main Spindle has been fully refurbished 8 Station Turret Programable Tailstock Parts Catcher Swarf Conveyor RH exit Machine has been fully serviced Dujdjyplgtepfx Acxjp Complete set of Machine Manuals UK buyers - Price £19,995 + VAT

Condition: ready for operation (used), empty load weight: 10,000 kg, table dimensions: 1250 x 506 mm Worklength with magnetic table: 1800 mm Grindingwidth: 500 mm Longitudinal travel X-axis (autom.): 1800 mm Cross-travel Y-axis (autom.): 500 mm Dodpfx Aceyr Tgyjxeup Dimensions magnetic table: 1250 x 506 mm Max dia grindingstone: Ø 400 mm

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, Dusdsylbpvjpfx Acxop 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2006 Mori Seiki NL2000Y/500 CNC Lathe with Y-Axis and live tooling. Plastics-only medical device use. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2006 Location: Ireland Availability: Immediate Machine Overview Available now from Used Machine Tools Ireland, this 2006 Mori Seiki NL2000Y/500 CNC Lathe is presented in excellent working condition with a very clean operational history. The machine was used exclusively for machining plastics by a medical device manufacturer, resulting in: Minimal spindle and guideway wear Clean internal condition Long remaining service life Unlike many plastics-only machines, this example is fully equipped with coolant, making it immediately suitable for both plastic and metal machining applications. The NL2000Y/500 is widely regarded as one of the most capable and reliable Y-axis CNC lathes in its class, featuring Mori Seiki’s renowned BMT turret technology for rigidity, accuracy, and thermal stability. Key Features & Highlights Y-Axis CNC Lathe – complex milling and turning in one setup Live Tooling (6,000 RPM) – drilling, tapping, and milling capability BMT (Built-in Motor Turret) – exceptional rigidity and precision Plastics-Only Medical Use – exceptionally low wear Full Coolant System Installed Coolant Tank Capacity: 235 Litres Tailstock & Workpiece Unloader – production-ready configuration MSX-850 III Control – powerful and reliable Mori Seiki control Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis Travel: 260 mm Z-Axis Travel: 590 mm Y-Axis Travel: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Number of Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Max Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Tailstock Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Coolant System Coolant Equipment: Yes Coolant Tank Capacity: 235 Litres Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial driven toolholders ✔ Selection of radial driven toolholders ✔ Selection of static toolholders Additional Notes Used exclusively for plastic machining in a medical device environment Fully equipped with coolant equipment, suitable for plastics or metals Specifications provided in good faith but not guaranteed Djdpfx Aoyhqmpscxeup Ideal Applications Medical device manufacturing Precision plastic machining CNC turning & milling with Y-axis Aerospace, electronics & high-precision components

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition. Plastics-only medical device use. Y-Axis, live tooling, tailstock, workpiece unloader. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2009 Location: Ireland Availability: Immediate Machine Overview We are pleased to offer this 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition, available exclusively through Used Machine Tools Ireland. This machine was used only for dry machining of plastics by a medical device manufacturer, meaning: No heavy metal cutting No coolant contamination Exceptionally low mechanical wear The Mori Seiki NL Series is globally recognised as a benchmark for high-precision CNC turning, and the NL2000Y/500 is especially sought after due to its Y-axis capability, live tooling, and BMT (Built-in Motor Turret) design. Key Features & Benefits Y-Axis CNC Lathe – complex milling and turning in one setup BMT Turret Technology – superior rigidity, accuracy, and thermal stability Live Tooling up to 6,000 RPM – ideal for milling, drilling, and tapping Medical / Plastics-Only Use – extremely clean operating history Tailstock & Workpiece Unloader – ideal for automated production MSX-850 III Control – powerful, reliable Mori Seiki control system Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis: 260 mm Z-Axis: 590 mm Y-Axis: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Taper: MT4 Live Centre Dusdjyhqkzopfx Acxsp Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial & radial driven toolholders ✔ Selection of static toolholders ✔ Extraction unit for plastic machining Additional Notes Used exclusively for dry plastic machining No coolant system fitted, however the machine is prepared for coolant installation Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Plastic & polymer machining Precision CNC turning & milling Aerospace, electronics & high-tolerance components This Mori Seiki NL2000Y/500 CNC Lathe represents a rare opportunity to acquire a premium Japanese turning centre with an exceptionally clean usage history.

Condition: good (used), mileage: 599,647 km, power: 375 kW (509.86 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,680 mm, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Heated mirrors - Bluetooth - Digital tachograph - Tachograph (control device) - Fixed - Globetrotter - Halogen lamp Dusdpeydvdfofx Acxep - Manual - Radio/cassette - Lane departure warning - Fabric - Blind spot sensor = Remarks = Number of axles: 3, Configuration: 6x2, Kerb weight: 1,327 kg, Gross weight: 27,000 kg, Total fuel tank capacity: 820 litres, Trailer coupling, King pin diameter: 40 DIN, Chassis height: 94 cm, Fifth wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cabin type: Globetrotter, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Number of airbags: 1, Parking cooler, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Colour: Multicolour, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 375 kW (503 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Gearbox: Volvo, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: VOL, 12 gears, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tyre size: 385/55R22.5; steered; left tyre tread: 8 mm; right tyre tread: 9 mm Axle 2: Tyre size: 315/70R22.5; twin tyres; inner left tread: 8 mm; outer left tread: 8 mm; inner right tread: 7 mm; outer right tread: 8 mm Axle 3: Tyre size: 385/55R22.5; lift axle; steered; left tyre tread: 8 mm; right tyre tread: 6 mm Weights Unladen weight: 1,327 kg Payload: 25,673 kg Gross weight: 27,000 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 3 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognisable quality • Competitive pricing • Professional business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registration arranged quickly • Expert technical services • The security of “recognisable quality” • And more.... Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Enquire directly about our European warranty packages.

Condition: good (used), mileage: 423,556 km, power: 375 kW (509.86 HP), first registration: 05/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,250 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Equipment = - 2nd diesel tank - Heated mirrors - Bluetooth - Digital tachograph Dodexk A Ivepfx Acxjup - Tachograph (control device) - Fixed - Globetrotter XL - LED lights - Alloy wheels - Manual - Power take-off (PTO) - Radio/Cassette - Lane departure warning system - Fabric = Remarks = Number of axles: 2, Configuration: 4x2, Kerb weight: 8,293 kg, Gross weight: 18,000 kg, Total fuel tank capacity: 1,175 litres, 2nd diesel tank, Fifth wheel height: 111 cm, Fifth wheel: Fixed, Number of diff-locks: 1, Alloy wheels, Suspension type: air suspension, Cab type: Globetrotter XL, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Colour: white, Heated mirrors, Lighting type: LED lights, Lane departure warning system, Climate control, Bluetooth, Engine power: 375 kW (503 HP), Fuel: Diesel, Emission class: Euro 6, Transmission: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, Central locking, Seating arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: VOL, 12 gears, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steering; Left tyre tread: 9 mm; Right tyre tread: 10 mm; Suspension: leaf spring Axle 2: Twin tyres; Left inner tyre tread: 12 mm; Left outer tyre tread: 13 mm; Right inner tyre tread: 12 mm; Right outer tyre tread: 13 mm; Suspension: air suspension Weights Unladen weight: 8,293 kg Payload: 9,707 kg gross vehicle weight (GVW): 18,000 kg Maintenance APK (vehicle roadworthiness test): valid until 05.2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €1,101 per month (default, 60 months); Please ask for further information and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Fair pricing • Correct business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) plates arranged quickly • Expert technical services • The assurance of 'recognisable quality' • And more.... Please visit our website for special offers and our full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask us directly about our European warranty package.

Condition: ready for operation (used), Voortman VB1250 lintzaag dop: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen van de lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale booreenheden 1 verticale booreenheid Elke unit heeft een automatische gereedschapswisselaar met 5 posities. spindel: SK40 (koeling via de spindel) Boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm schroefdraad tappen: M8/M24 Inclusief meting van de profielhoogte middelpuntmarkering inbegrepen nummeringseenheid inbegrepen 18 meter aan invoerrollenbanen 6 dwarsaanvoerbanden van 4 meter lengte 16 meter aan afvoerrollenbanen maximale breedte: 1050 mm capaciteit: 400 kg/m³ maximaal positioneringsgewicht: 9 ton Rollentoevoer meetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4 kW - 160 bar Duodpfswlkwwex Acxop

Condition: ready for operation (used), controller manufacturer: Siemens 840DSL, total height: 3,325 mm, total length: 5,520 mm, total width: 3,320 mm, empty load weight: 10,000 kg, nominal power: 50 kW (67.98 HP), 5-assig simultaan bewerkingscentrum Type: K3X8F Dedpfx Aewznxdjcxeup max. werkstuk: dia 700 mm max. werkstukgewicht: 300 kg afstand spilneus / boventafel: 525 mm A-as (kanteling): +30°/-180° C-as (rotatie): 360° continu snelle bewegingen: 50.000 mm/min hoge druk koeling door spindel spaantransportband trillingsbewaking lasertoolsonde Blum Micro werkstuktaster Blum TC52 met Fanuc Robot laadsysteem RB: Robot: A05B-1330-B205 (Fanuc Robot R-1000iA/100F) Controller: A05B-2601-B112 (Fanuc-systeem R-30iB) Max longitudinal travel X-axe: 780 mm Max cross-travel Y-axe: 700 mm Max travel Z-axe: 500 mm Admission in millinghead: HSK 63A Spindlespeeds: 16 000 rpm Table size: dia 500 mm Toolholder: yes Number of tools: 36 toolpositions

Condition: ready for operation (used), empty load weight: 7,000 kg, + 3 freeskoppen Dodpfx Aoycy Ekecxoup Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 800 mm Max travel Z-axe: 500 mm Power on spindle: 15 HP / 11 kW Type of millinghead: ISO 50 Spindlespeeds: 31 > 1400 rpm Table size: 2000 x 600 mm Digital screen: Heidenhain 3 axes

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen - 1 meetsonde Dsdpfx Acev Sfk Hjxjup Freeskop: -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: used, Year of construction: 2005, punching pressure 50.0 t Dsdpfewu Hkfjx Acxoup L-beam 100 x 8.0 mm flat steel 350 x 13.0 mm blade length 370 mm work height max. 734 mm voltage 400 V weight of the machine ca. 900 kg dimensions of the machine ca. 1000 x 700 x 1700 mm Features: - Flat steel shears Cuts flat steel: up to 350 x 13 mm L-steel, 45° cut: up to 100 x 8 mm Blade cutting length: 370 mm Working height: 734 mm - Profile and bar steel shears Shear cross-section: max. 1550 m² Stroke, infinitely adjustable: 10 - 36 mm - Shears with standard blade 90° L-steel 90° cut: up to 100 x 8 mm Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-steel, 90° cut: up to 100 mm Double-T steel, 90° cut: up to 100 mm Working height (center of blade cross): 1044 mm - Notcher with square notcher U-steel, in flange: 80 - 120 mm Double-T steel, in flange 80 - 120 mm Notch width: 44.5 mm Notch depth: 50.0 mm Working height: 1000 mm

Condition: good (used), mileage: 579,225 km, power: 375 kW (509.86 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,720 mm, total width: 2,550 mm, total height: 3,430 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, - 2nd diesel tank - Heated mirrors Duodpfjxr Ub Djx Acxjp - Bluetooth - Digital tachograph - Electric - Tachograph (control unit) - Fixed - Hydraulic system - Alloy wheels - Power take-off (PTO) - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Xenon headlights Number of axles: 3, Configuration: 6x2, Unladen weight: 10,200 kg, Gross weight: 27,500 kg, Total fuel tank capacity: 650 liters, Second diesel tank, Fifth wheel height: 123 cm, Fifth wheel: Fixed, Number of diff locks: 1, Alloy wheels, Suspension type: Full air, Cab type: Sleeper cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting: Xenon headlights, Lane departure warning system, Climate control, Heated seats, Bluetooth, Engine output: 375 kW (503 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission make: Volvo, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Power take-off (PTO), PTO type: 1, Starter battery, Pump, Central locking, Seating: 1+1, Seat upholstery: Fabric, Electric seat adjustment, Last axle steering / large hydraulics with oil cooler. Transmission Make: VOL, 12 gears, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 4 mm; Tire tread right: 2 mm Axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 3 mm; Tire tread left outer: 5 mm; Tire tread right inner: 3 mm; Tire tread right outer: 2 mm Axle 3: Tire size: 385/65R22.5; Lift axle; Steered; Tire tread left: 10 mm; Tire tread right: 10 mm Weights Unladen weight: 10,200 kg Payload: 17,300 kg GVW: 27,500 kg Functional Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Lease price: €862 per month (default, 60 months); ask for more info and conditions. Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good pricing • Professional business conduct • We speak many languages • We understand our customers • Import and transport assistance • (Export) license plates quickly arranged • Expert technical services • The assurance of “recognizable quality” • And more… Please visit our website for special offers and full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty packages.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, travel distance X-axis: 660 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item promptly between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 660 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Spindle taper: ISO 40 Spindle speed range: 100 – 6,000 rpm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table Table dimensions: 700 x 360 mm Max. table load: 300 kg Distance table to floor: 840 mm Distance table center to column min.: 190 mm Distance table center to column max.: 570 mm Tools Max. diameter with adjacent tools: 85 mm Max. diameter with empty adjacent stations: 135 mm Max. tool length: 250 mm Max. tool weight: 6 kg Max. total tool weight: 60 kg Ball screw Pitch: 32 mm Diameter: 10 mm T-slots Number: 3 Width: 18 mm Dedpfxeyr I D Te Acxoup Spacing: 110 mm MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Machine weight: 4,000 kg EQUIPMENT 16-position tool changer Tool holders Measuring probe 4th axis Note: The vise shown in the images is not included in the sale. External reference: Lot 20

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 5098, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Djdpfxsyr Hlpe Acxoup Submission of a bid constitutes an obligation to collect the item within the specified period from 04/05/26 to 07/05/26. TECHNICAL DETAILS Travel X-axis: 960 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Table dimensions: 700 x 360 mm Number x width x spacing of T-slots: 3 x 18 x 110 mm Distance from table to floor: 840 mm Maximum table load: 300 kg Distance from table center to column: min. 190 mm, max. 570 mm Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Rapid traverse: 15 m/min Spindle speed: 100 to 6,000 rpm Spindle taper: ISO 40 Ball screw X and Y axis: 32 x 10 mm lead diameter Maximum tool diameter (adjacent tool stations occupied): 85 mm Maximum tool diameter (adjacent tool stations free): 135 mm Maximum tool length: 250 mm Permissible tool weight per station: 6 kg Maximum total tool weight: 60 kg MACHINE DETAILS Control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D probe Note: The machine vice shown in the photos is not included in the scope of delivery. External reference: 25

Condition: used, mileage: 805,618 km, power: 368 kW (500.34 HP), first registration: 11/2017, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22.5 Duodpfxjwxcc Se Acxsp Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 GVW: 19.000 kg Make of engine: Volvo

Condition: not inspected (used), Year of construction: 1992, functionality: unexamined, machine/vehicle number: B5133, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! Dedpfx Aceyr Hinexjup By placing a bid, you commit to timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Travel X-axis: 960 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Table dimensions: 700 x 360 mm T-slot number x width x distance: 3 x 18 x 110 mm Distance table to floor: 840 mm Max. table load: 300 kg Distance from table center to column min.: 190 mm Distance from table center to column max.: 570 mm Ball screw, X and Y axes: 32 x 10 mm Spindle taper: ISO 40 Spindle speed: 100 to 6,000 rpm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Max. tool diameter with adjacent tools: 85 mm Max. tool diameter with free adjacent slots: 135 mm Max. tool length: 250 mm Permissible weight per tool: 6 kg Max. total tool weight: 60 kg MACHINE DETAILS Control: HEIDENHAIN TNC 425 Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg Connection: 13 kW EQUIPMENT 16-position automatic tool changer 3D touch probe Note: The machine vice shown in the photos is not included in the scope of delivery. External Reference: 23

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 60 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm Dsdexugw Ajpfx Acxeup -Weight: 163 kg