Used Ballistic Seperator for sale (51)

Year of construction: 2024, operating hours: 6,000 h, condition: used, functionality: fully functional, !!!!!REACH FOR SEPERATE PARTS SELLING!!!!! RECYCLING LINE 1 GAZIANTEP/ TURKİYE 450000EURO working hour: 6000 hour ## Included Equipment ### 1 Disan Hydraulic Baling Press * Model: DKPM 120-2024 * Capacity: 120 tons * Condition: Active and fully operational ### 1 Disan Hydraulic Shredder * Model: DPM 2024 * Capacity / Type: 1600 * Condition: Active and fully operational ### 1 Sorting Conveyor * Brand: Disan Hydraulic * Year: 2024 * Material: Rubber * Length: 15 m ### 3 Industrial Conveyors * Brand: Disan Hydraulic * Year: 2024 * Material: Steel and rubber * Lengths: Between 12 and 22 m ### 4 Cleated Conveyor Belts * Brand: Disan Hydraulic * Year: 2024 * Material: Rubber * Length: 6 m each ### 1 Bale Opening Machine * Brand: Disan Hydraulic * Year: 2024 * Material: Steel ### 1 Plastic Crushing Machine * Type: 80 * Condition: Active and fully operational ----- RECYCLING LINE 2 IZMIR / TURKIYE working hour 12000 hour 400000 EURO ## Included Equipment Djdpezl Rdnjfx Aa Hecl ### 1 x Disan Hydraulic Baling Press * Model: DKPM 120-2024 * Capacity: 120 tons * Condition: Fully operational and in active use ### 1 x Disan Hydraulic Shredder * Model: DPM 2024 * Capacity / Type: 1600 * Condition: Fully operational and in active use ### 1 x Sorting Conveyor * Brand: Disan Hydraulic * Year of Manufacture: 2024 * Material: Rubber * Length: 15 m ### 3 x Industrial Conveyors * Brand: Disan Hydraulic * Year of Manufacture: 2024 * Material: Steel and rubber * Lengths: Between 12 m and 22 m ### 4 x Cleated Conveyor Belts * Brand: Disan Hydraulic * Year of Manufacture: 2024 * Material: Rubber * Length: 6 m each ### 1 x Bale Opener * Brand: Disan Hydraulic * Year of Manufacture: 2024 * Material: Steel ### 1 x Plastic Crusher * Type: 80 * Condition: Fully operational

Condition: used, Year of construction: 2009, Overview  Djdpfxeyb Th Aj Aa Hscl This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C

Condition: like new (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, total height: 3,300 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 28,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, 5-axis machining centre DMG DMF 260-11 Year of manuf. 2012 Control Heidenhain iTNC 530 Speed [rpm] 10000 Movement X/Y/Z [mm] 2600/1100/900 Tool holder SK50 Spindle Speed 10.000 U/min Power 44 kW Torque 288 Nm Taper SK 50 Media feed-through Blast air, Coolant 4. NC-Axis Dodpfx Aaezucm Hj Hscl Technologie NC-Swicel head Stroke +/- 100° Clamping Hydraulic 5.NC-Axis Technolgie NC-Round table Stroke 360° Diamenter 1.050 mm Clamping Hydraulic Load capaity 1.200 kg Tool magazin 60 stations Rapid travers 40 m/min Chip managment Chip conveyor Coolant mangament Coolant through spindle, 80 bar Positioning sensor Direct scale in all Axis Workpiece measurment Touch probe, Heidenhein TS 649 Oil mist seperator: Media feed-through spindle Blast air, Coolant Process observation Operation mode 4

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA Dsdpfjxrnwlox Aa Hecl MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Includes Waters e2695 Seperations Module Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Dsdpfsy H E Sljx Aa Hjcl • Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Dedeyxp Nxopfx Aa Hocl Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit BAT 102 Djdpfxjzv S R Ds Aa Hecl Automatic Stacker S-3 Max. Sheet Size X : 1020 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: good (used), Year of construction: 1996, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit: Seperating Roller Jogging Table (Delivery) Format: 1020 x 1140 mm Dcjdezvwkvspfx Aa Hel Condition: Cleaned

Condition: good (used), Year of construction: 1998, functionality: fully functional, Automatic Stream Feeder A-10-P: Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 78 (Waterbased & Thermal) Automatic BAT Sheet Seperator Max. Sheet Size X : 760 mm Dsdpfozv S N Tjx Aa Hecl Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Dedpjzvn Hzsfx Aa Hscl Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery)

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE Djdozv S Aaspfx Aa Hocl MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16074, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Automatic Sheet Seperator TM -4 Dcedpszimygjfx Aa Hel Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer

Condition: excellent (used), Year of construction: 2008, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW Dodpfeztvzzex Aa Hocl MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM Dcodpfx Ajzmxmmsa Hel TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Year of construction: 2017, condition: as good as new (ex-display), › ideal for all shirt fabrics (FX 1000) 1000mm belt › seperate feeding and transport belts, "cool feeding" › special insulation, little heat radiation Dcjdpepfa Nhsfx Aa Hjl › upper and lower heating individually controlled, with temperature limiters (1000 mm - 39 .37 inch long) › seperate heating zones selectable, TOP (shirt), BOTTOM (outerwear) › special speed-heat up function, for fast heating of the machine › touch screen for program storage and service functions › optional air and compression cooling › failure diagnostic system

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Dedpfx Aerx Rxtea Hjcl Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: used, Potato specialties oven suitable for thermal oil heating infeed height: ± 1.000 mm outfeed height: ± 1.000 mm suitable for fire protection with seperate infeed belt oil circulation system Dedpfjzldxfsx Aa Hecl net belt length: ± 9.000 mm net belt width: ± 650 mm adjustable speed lifting unit dimensions (l x w x h): ± 12.720 x 1.625 x 3.455 mm steam connection heated drip tray 0.5 - max 3 bar. oil level check VEGA central air extraction with telescopic chimney Infeed belt Type TB-D 2100-6.5 Dimensions: 2,100 x 650 mm 0.37 kW/1.1A External tubes heat exchanger “Van de Walle Apparatenbouw” Type Florigo WW050 BT Year of manufacture 08/2013 500 kW Type Van de Walle D323-V012-2000 Casing: Working pressure 6 bar / 290°C / 85L Tube: Working pressure 6 bar / 220 °C / 94L Test pressure 9 bar Drum filter Type FT750-3 Drum dia. 750 mm Drum dia. 300 mm 0.37 kW Drum 1.1 A screw 0.12 kW / 0.41 A Capacity 94 m³/h Blower 0.25 kW / 0.8 A Fryer Product belt 0.75 kW / 1.9 A Fryer top belt 0.75 kW / 1.9 A Lifting device 1.1 kW / 2.6 A Drum filter / Waste screw 0.12 kW / 0.41 A Fryer main pump 15 kW / 29.3 A Fryer auxiliary pump 0.55 kW / 1.5 A Fryer drip tray pump 0.55 kW / 1.5 A

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor Dedpfxswp D Nbs Aa Hscl 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: good (used), Year of construction: 1999, functionality: fully functional, Size: max 480 x 320 x 80 mm; min 140 x 100 x 2 mm Cover size: max 642 mm; min 203 mm Book block thickness: max 80 mm; min 2 mm Speed: max 7.500 c/h; min 1.200 mm Equipment gathering machine • hand feeding station • 21 feeders 3691/18 • reject gate 3614 • pile delivery Universo 244 • seperation element • jogging element perfect binder • 30 clamps • PVA (cold glue) spine gluing unit • hot melt side gluing unit • IR intermediate dryer • gauzing station • stream cover feeder • 2 pressing stations • HF dryer optionales Equipment:--not included-- Djdpfx Astuwilsa Hjcl • PUR spine gluing unit • premelter for PUR gluing unit

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! Dcedsq Ec Rgspfx Aa Hsl AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 Dcodpfxjlikvho Aa Hol X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity Dcodenzh T Nopfx Aa Hsl 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Stepless variable hydraulic system Quantitive lubrication system Back water splash shield

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Dcjdpoh Ra Spofx Aa Hol Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Automatic Stacker S-3 Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Dodpfx Aaorp D I Ij Hecl Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: used, machine/vehicle number: 52326/08, x-travel:250 mm y-travel:150 mm z-travel:305 mm table surface area:600 x 210 mm spindle speeds:40 - 2000 U/min spindle turning speed range:16 spindle taper:SK 40 feed:10 - 500 mm/min feed steps:16 vertical head swivelling:+/- 90 Grad total power requirement:1,0 / 1,4 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:1,0 x 1,25 x 0,85 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table ( Tilt and Turn ) - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse Dcsdpfx Ajcxxrvsa Hsl - Vertical quill - 60mm, NK-40 / SK-40 - Seperate power cabin