Vibratory Dryer
ZEGA ZDV 550 Circular Type Vibratory Dryer

Name: ZEGA ZDV 550 Circular Type Vibratory Dryer
Brand: ZEGA
Availability: InStock

Year of construction

2025

Condition

New

Location

İkitelli OSB Turkey

Vibratory Dryer ZEGA ZDV 550 Circular Type Vibratory Dryer

ZEGA ZDV 550 Circular Type Vibratory Dryer

Show map

Machine data

Machine type:: Vibratory Dryer

Manufacturer:: ZEGA

Model:: ZDV 550 Circular Type Vibratory Dryer

Year of construction:: 2025

Condition:: new

Functionality:: fully functional

Price & Location

Location:: İKİTELLİ OSB ÇORAPÇILAR SAN SİT D BLOK NO:15-16 BAŞAKŞEHİR, 34490 İstanbul, Türkiye

Call

Technical details

Total length:: 1,370 mm

Total width:: 1,370 mm

Total height:: 1,020 mm

Overall weight:: 360 kg

Input voltage:: 380 V

Warranty duration:: 24 months

Nominal power:: 1.9 kW (2.58 HP)

Power:: 1.9 kW (2.58 HP)

Workpiece width (max.):: 240 mm

Workpiece length (max.):: 240 mm

Equipment:: CE marking, documentation/manual, emergency stop

Details about the offer

Listing ID:: A10398590

Update:: 02.04.2026

Description

ZDV Series - Circular Type Dryers

For drying after deburring and polishing
Corn granule is used.
Various volumes in the range of 125lt - 1650lt
Includes seperating system- Resistance heated
Drying for all kinds of metal and non-metal materials
Suitable for automation system
Optional accessories
Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts

Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process.
Bwodpfx Acel Sm N Tevjk

The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy.

On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily.

During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts.

Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency.
Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis.

Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used.

It can work integrated with automation systems with PLC software.

Dust absorbing system is available as an option.

The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Seller

Registered since: 2022

10 listings online

Call

Send inquiry

Telephone & Fax

+90 212 4... show

These listings may also fit your interest.

Listing

Voerde (Niederrhein)

1,030 km

Chamber filter press

Call

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Bwodsqakbrepfx Acvek Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

See details

Listing

DYAS PDC 1500 / CNC Plate Drilling Dyas Machinery Dyas PDC 1500

Minareliçavuş OSB

3,140 km

DYAS PDC 1500 / CNC Plate Drilling
Dyas MachineryDyas PDC 1500

Call

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Bedogbfaxepfx Acvswk Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

See details

Listing

Centerless Belt grinding tube finishing Löser RP-S 371

Dietzenbach

1,231 km

Centerless Belt grinding tube finishing
LöserRP-S 371

Call

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Bodjpugwiepfx Acvswk Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

See details

Listing

DOWEL CROSS-CUT AND CHAMFERING MACHINE Löser AA220

San Giovanni Al Natisone

1,756 km

DOWEL CROSS-CUT AND CHAMFERING MACHINE
LöserAA220

Call

Listing

Punch Laser Machine Trumpf TRUMATIC 6000L

Germany

1,293 km

Punch Laser Machine
TrumpfTRUMATIC 6000L

Call

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Bwsdjw Uk A Rspfx Acvjk

See details

Listing

Shredder for die-cutting machine Bobst RS TeamTech Sp. z o. o. RS-9

Rybnik

1,877 km

Shredder for die-cutting machine Bobst
RS TeamTech Sp. z o. o.RS-9

Call

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Bwsdpfxjiklxbe Acvok Feel free to contact us.

See details

Listing

4-axis horizontal machining center HAAS EC 1600

Kaufungen

1,234 km

4-axis horizontal machining center
HAASEC 1600

Call

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges Bodpfx Ajv N Di Ascvswk X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

See details

Listing

Haldenwang

1,418 km

Horizontal bending press
ZopfAH 40

Call

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control Bwjdpfx Ajqvm Ukjcvsk - hydraulic pressure 40 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

See details

Listing