Used Automatic Punching Press for sale (33,539)

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: fully functional, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18T). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm, to accommodate different tools and material profiles. Additionally, a Siemens-manufactured Bruderer U control system is installed. The machine is partially functional: The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production. The rubber mounts for the slides are brittle and are breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18T) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400V / 50Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 Dsdpfxsz H H Dqe Aqvjcp The machine will be dismantled in week 46. Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Dedpfox U Eiaex Aqvocp Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Type: V32 MACHINE DETAILS Manufacturer: Kaiser Machine type: Punching machine Dimensions Dodpfxs Adugno Aqvocp Length: 3,000 mm Width: 2,000 mm Height: 2,700 mm Weight: 3,000 kg EQUIPMENT Feeder

Condition: used, Pressure: 30t Strokes per minute: 120-600 Stroke: 40mm Up table size: 250x500mm Down table size: 600x600mm & 400x320mm Between Columns Technical characteristics: *AUTOFEED LENGTH 80mm, WIDTH 320mm *AIRCLUTCH Power: 7,5kw DIMENSIONS: Height: 2600mm Width: 1800mm Length: 1200mm Weight: 3800kgr Dsdpfx Aqo Dvk Asvecp New electric systems

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm Dodpet Hwz Nofx Aqvscp No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Dedpfxe Aduyzs Aqvscp Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Bruderer Type: BSTA 20E Year of manufacture: 1987 Machine type: Punching press Performance Data Punching force: 200 kN Operating pressure: 6–10 bar Electrical Data Operating voltage: 380 V Frequency: 50 Hz Connected load: 20 kW Dcode Adu Sqepfx Aqvop MACHINE DETAILS Dimensions Length: 2,000 mm Width: 1,500 mm Height: 2,200 mm Weight Machine weight: 1,500 kg

Condition: used, Year of construction: 2014, operating hours: 10,100 h, functionality: fully functional, machine/vehicle number: 12410, total height: 2,900 mm, ram adjustment: 40 mm, total width: 1,550 mm, total length: 2,000 mm, table length: 580 mm, table width: 460 mm, pressing force: 25 t, control cabinet height: 1,800 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, overall weight: 4,700 kg, DGUV certified until: 01/2027, We offer a used punching machine of the type Mabu VS251/RC11 from the year 2014. The machine is in good used condition and ready for immediate use. Manufacturer: Mabu Model: VS251/RC11 Year of manufacture: 2014 Condition: used Machine type: Punching machine Additionally, the machine is equipped with a high-quality roller feeder from Zehnder & Sommer (model EV12-22TK, year 2019), ensuring precise and reliable material feeding. Dedpfx Aoyzl Txsqvecp If you have any questions or require further information, we are always happy to assist you. Please feel free to contact us by message or by phone. All information without guarantee. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: HZPUI-T2300, feed length X-axis: 10,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 30,000 mm, ram adjustment: 10,000 mm, installation height: 54,000 mm, total width: 80,000 mm, total length: 90,000 mm, drop-through hole in table: 32,000 mm, input voltage: 380 V, overall weight: 5,400 kg, DGUV certified until: 08/2026, control voltage: 380 V, product height (max.): 5,000 mm, year of last overhaul: 2025, sheet thickness steel (max.): 2,000 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 3,000 mm, Equipment: 4th hydraulic function, SchulerUsed German Schuler hydraulic press, model HZPUI-T-2300/1700, manufactured in 2001. Nominal force 23000kN (2300 ton), bolster size 4600×2500 mm, total weight 540 ton, power 1600kW, HLP46 hydraulic oil. Heavy duty for automotive panel, deep drawing. Dsdpe Afapksfx Aqvocp

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Djdpfxozuur Uo Aqvjcp Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Dodpfx Aszrwzaeqvjcp Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Djdjzrwypopfx Aqvocp Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min Dcjdpfx Aqovu E I Devsp total power requirement 20 kW

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 131 720, total height: 4,120 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 2,600 mm, total length: 3,600 mm, drop-through hole in table: 1,200 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 160 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 650 mm, distance between stands: 1,600 mm, overall weight: 35,000 kg, control voltage: 24 V, input frequency: 50 Hz, ATTENTION: The machine is currently partially disassembled. The control panel and switch cabinet have been scrapped. Components can be inspected. Before delivery in 2026/2027, the machine will undergo a complete mechanical and electrical overhaul. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Working height: 550 mm Table dimensions: 2000 x 1250 mm Dodpfxezrxbue Aqvocp Ram dimensions: 2000 x 1000 mm The machine is currently not operational.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, Completely overhauled BRUDERER high-speed stamping press BSTA125 incl. new press control system Dcedpfxjy D H H Ej Aqvep Technical data: Tonnage: 1250 kN Tooling opening: 1170 mm Strokes per minute: 100–850 SPM (depending on selected stroke) Adjustable stroke: 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment range: 89 mm Tool installation height: 268–386.5 mm (depending on selected stroke) Bolster plate: 1150 x 1070 mm Ram area: 1040 x 600 mm Strip pass width: 440 mm Base plate opening: 1120 x 350 mm Strip entry height: 80–180 mm Strip feed direction: left to right Feeder: servo feed

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min Dodpfeu Icxqsx Aqvjcp T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: reconditioned (used), functionality: fully functional, ram adjustment: 40 mm, installation height: 2,500 mm, pressing force: 30 t, stroke length: 40 mm, High Speed Automatic Punching Press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with twin synchronized double rolls feeds for strips widths from 5 mm – 150 mm. PLC touch screen logical interface control. Numerically controlled stamping process (NC). With stroke and speed counter, programmable length, auto stop. Three working modes: Manual, One stroke and Automatic. Pneumatic clutch and brake. Operator’s instruction manual in English. Stroke power: 300 [KN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute up to 10 in one second. Maximum strip thickness 2.5 [mm]. Dcsdpfx Aqovkfmrovep Central lubrication. Power consumption 5.5 [kW] Technical Air 5-10 [bar]. Warranty: 1 year. Two feeders are used when you need to stamp very thin, soft strip or very heavy strip, to secure precise feeding. All specifications non-binding , subject to change without notice.

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new Djdpfscxxycsx Aqvecp

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm Dsdpfxjcxxrdo Aqvscp table-size:450x450 mm Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. Dsdozb Iihjpfx Aqvjcp TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min Dodpfx Aqovu E Iqevecp total power requirement 20 kW

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Dodpfx Aj Ahkq Sjqvscp Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: used, Year of construction: 1987, pressure 40 t Dsdevu E Iwspfx Aqvocp no. of strokes 500 Hub/min total power requirement 5,5 kW

Condition: refurbished (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 100 mm, pressing force: 150 t, Raster die-cutting machine Mechanically overhauled in 2022 Control system: Siemens S7, 2017 Feeder: Zehnder & Sommer Alternatively: Raster pneumatic roller feeder Number of strokes: 40 – 150 Dods Ahyu Ropfx Aqvocp Ram stroke: 30 – 120

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Dcsdpfoyyppbox Aqvjp