High Speed Automatic Press

Bruderer BSTA 30

Condition: good (used), BRUDERER BSTA 30 punching machine with 2 reels and soundproof cabin - Compressive force max. 30 tons - Stroke rate: 100 to 600 H/min. - Drive power: 0.96 to 5.5 kW Rjdpfx Aevb Nm Dsa Esck - Width: 1200 mm - Depth: 1160 mm - Height: 2150 mm Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: refurbished (used), Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Rcodpfofmavxjx Aa Esk Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar. More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm material width 120 mm Rcsdpfx Asvuk Hrsa Eek material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: good (used), . Technical data . Pressing force 30 t Rsdexu T Eyspfx Aa Ejck Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Year of construction: 2014, condition: ready for operation (used), A defective CNC precision surface and profile grinding machine ABA is available. Grinding length: 2500mm, grinding width: 1020mm, cross travel: 920mm, cross feed intermittent: 750mm/pulse, cross feed continuous: 5000mm/min, table spindle center distance: 1100mm, magnetic plate dimensions X/Y: 2500mm/1000mm, max. table load: 5000kg, table speed: 60m/min, spindle power: 26kW, grinding wheel dimensions X/Y/Z: 500mm/100mm/203mm, grinding wheel rotation speed: 35m/s. Machine dimensions X/Y/Z: approx. 8000mm/4000mm/3150mm, weight: approx. 20000kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1000h, cycle time: approx. 400h. Including cooling unit Hyfra sigma 13-S, year of manufacture: 2014. The linear drive of the X-axis is defective and has been dismantled. Documentation available. On-site inspection is possible. Rcedpowi Tpksfx Aa Eek

Condition: used, Year of construction: 1979, machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:540 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm total power requirement:5,5 kW weight of the machine ca.:3 t Rcedpfx Aascxxu Ne Ejk dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, table length: 540 mm, table width: 470 mm, pressing force: 30 t, overall weight: 3,000 kg, product height (max.): 120 mm, sheet thickness steel (max.): 3 mm, Pressure 30 t Stroke 8 - 40 mm Stroke rate 100 - 600 rpm Column width 330 mm Installation height (stroke + ram adjustment at top) 280 mm Side column clearance 300 mm Through-hole in the table 315 x 110 mm Table height above floor 1000 mm Material thickness - 3.0 mm Feed length - 60 mm Drive power 5.5 kW Press ram height adjustment 40 mm Max. Belt passage width 170 mm Press dimensions: length x width x height 1160 mm × 1200 mm × 2150 mm Control panel: length x width x height 350 mm x 700 mm x 960 mm Weight approx. 3000 kg. Rjdpov Uc Arofx Aa Eeck

Condition: new, Year of construction: 2025, Technical specifications: - max. Thickness of cut sheet 1.2mm, - max. Working width: 3000 mm - in the equipment there is a stop for adjusting the cutting depth and a frame for holding the plate. - the extension table makes it easy to carry large-format metal sheets on the table - measuring table with graduation - robust and compact steel construction - high-quality, durable steel knives - extremely stable and heavy construction of cast iron - ground and hardened plate shear knives - Back gauge system - CE mark - declaration of conformity open design suitable for endless cuts large cast work table engine power 2,2 kW oil HL 46 pressure force 4t Rsdeda I Ihepfx Aa Esck working pressure 120-150 bar has hydraulic compensators from the cutter bar up Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg

Condition: used, machine/vehicle number: 632/6, pressure:30 t Rodscxxycjpfx Aa Eeck no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder Rcodpfxscxxrde Aa Eek

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) Redpjnxh T Rjfx Aa Eock * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: used, Year of construction: 1971, machine/vehicle number: 1967, pressure:30 t no. of strokes:100 - 600 Hub/min stroke adjustable from - to:8 - 40 mm ram adjustment:40 mm inlet width:198 mm mould height - Max./min.:230 - 270 mm roll surface width:110 mm hole in the table:310 x 80 mm distance between columns (le-ri):330 mm distance between columns (vo-hi):280 mm table height over floor:990 mm column diameter:50 mm voltage:380 V frequency:50/60 Hz control voltage:24 V table-size:475 x 450 mm Redscxxxmspfx Aa Ejck ram diameter:190 mm total power requirement:0,96 - 5,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1,2 x 1,16 x 2,15 m