Used Automatic Die Cutter for sale (26,841)

Condition: like new (used), We sell an automatic machine to cut vaseline for embroidery. Ideal for high volumes shops using, ZSK, Tajima, Barudan, Brother, Happy machines. Dkedpfoxz S Tvox Acxsi High end and easy to operate, huge savings on labor/material Completely programmable Rare

Condition: good (used), Karl Schnell FD3 Process Automat Cutter-Mixer-Emulsifier This machine combines in a unique way mixer, cutter and emulsifier in a closed system. The advantages are obvious: – Space-saving by compact design, – Complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, – Stable end product with reproducible quality by fully automatic process control, – The possibility for direct and indirect heating and cooling, – The possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarse grained small pieces. In short: Time and cost saving with improved product quality. Dodoxnkciepfx Acxoki Manufacturer: Karl Schnell Model: FD 3 Hole Plate: 175 mm Batch Capacity: 310 liter Drive Emulsifier: 18/37 kW Pre-mincing motor: 15/30 kW Agitator motor: 0,7 kW Revolution agitator: 13,3 min-1 Drive infeed screw: 1,5 kW Machine Dimensions LxWxH: 2.250x1.800x2.100 mm Machine Weight: 3.000 kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 11508, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, controller manufacturer: Flexa, roller length: 1,650 mm, working width: 1,650 mm, overall weight: 370 kg, power: 1.5 kW (2.04 HP), input voltage: 230 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, documentation/manual, emergency stop, The Flexa Miura Plus is a professional automatic XY cutter designed for trimming paper, vinyl, wallpaper, foils, banners, and other roll-fed media up to 1650 mm wide. The machine is PLC-controlled with a touchscreen interface, offering fast setup and precise cutting for industrial and print finishing environments. Dedoxbfztspfx Acxeki This unit has been upgraded with 5 sensors, allowing operators to configure settings for five different substrates and switch between them quickly without lengthy adjustments. Powered by an electric drive system, it ensures smooth handling, reliable operation, and consistent results. The Miura Plus is also ideal for cutting two parallel tiles simultaneously, making it a perfect fit for poster, wallpaper production and large-format finishing. We will also include 16 spare blades free of charge. Located in Riga, Latvia, the Miura Plus is a robust and efficient solution for businesses looking to increase productivity and versatility in their finishing workflow.

Condition: good (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 21860, Cylinder Die-Cutter Dkodpfx Acsxltnpjxei Heidelberg SBG 56x77 Serial Number 21860

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or maintenance backlog. The electronics have not been modified or altered. Everything is still original. Documentation is complete. We have circuit diagrams and exploded views for both digital and analogue systems. All frames and pins are present to utilize the machine's functions, especially for the stripper, blank separator, and lower stripping station with pins. There is a quick-clamping system so that the stripper, for example, does not need to be secured separately. If interested, additional pictures or videos can be sent. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Max. speed: 8000 sheets/h Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop stacker Side guide Quick-release lock We can assist with disassembly, assembly, and transport. Special feature: The machine is raised by approximately 100 mm, eliminating the need for a pit in production! The raised frame can be removed without tools and is not permanently attached to the machine. Dkedpfx Aowk I Iqjcxei Please feel free to contact us with any further questions. Best regards

Condition: excellent (used), Year of construction: 2001, working width: 2,800 mm, a) Martin Prefeeder Dkjdewdvrdepfx Acxei b) Martin DRO 1628 GT Belt feeder introduction N. 4 colors from the bottom Vacuum transport between the groups Posilock die cutting tool lockind system Vacuum Stacker Ball rotary table c) N. 1 Bobst Breaker Ball rotary table Batch turner d) Martin palletizer Computer MPC2 Max size 1600x2800 mm.

Condition: good (used), Year of construction: 2000, operating hours: 23,000 h, Bobst SP 142 CER II Djdpfx Acoxxypyjxoki

Year of construction: 2017, condition: used, functionality: fully functional, Fully automatic core cutter including core magazine The machine is for sale due to replacement with a new model. It remains operational and installed, and can be inspected and demonstrated by appointment. Dedjxgh Sropfx Acxjki Technical data: • Machine type: Fully automatic core cutter with magazine • Model: AKG–2000 • Purpose: Cutting cardboard cores • Core inner diameter: 30–152 mm • Max. core wall thickness: 12 mm • Min. core wall thickness: 2 mm • Max. core length (loading length): 2000 mm • Min. core length: 1000 mm • Max. cutting length: 1200 mm • Min. cutting length: 12 mm • Min. remaining core length: 50 mm • Number of cutting blades: 1 • Power supply: 3x400 V / 50 Hz / EU plug / 4 kW • Compressed air supply: 6–8 bar • Core magazine capacity: 20 cores, each 76.2 mm • Control panel size (HMI): 4'' touch screen • Drive: Bosch Rexroth (4-axis servo) • Certification: CE Machine operation: The automatic core cutter allows your cardboard cores to be cut while the operator attends to other tasks. The core length, dimension, and quantity to be cut are entered via the control panel. The core magazine is then loaded with 2 m long cores and, with the push of the start button, the machine processes the job automatically, without the need for operator intervention or supervision. This significantly reduces the variety of cores needed in inventory, saving on storage capacity and costs. Our automatic core cutter features a Bosch Rexroth 4-axis servo drive, addressing all requirements of small to medium-sized businesses with minimal investment. Custom software requirements can be accommodated. Production jobs can be entered either manually via the control panel or via USB stick. Jobs can be saved and recalled as needed. For optimal service, the machine is equipped with an Ethernet port for diagnostics and rapid troubleshooting. A set of core adapters is included with the machine; additional adapter sizes are available upon request. The corresponding settings for core diameter changes must be carried out by the machine operator. Available adapters for core inner diameters: 30 / 50 / 70 / 76 / 150 / 152 mm

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Dkjdpfx Aeff Apiscxji Stroke 20 mm

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Dodpfov T T N Hox Acxoki Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Dkedowq Dwzopfx Acxji Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Djdpfx Ajwfq T Secxeki Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Dedpjw D E Rvofx Acxski Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Year of construction: 2006, condition: excellent (used), The machine was taken out of operation and put into storage. Furthermore, it was driven as a capacity buffer and thus only little. Dksdpfxsncbtbs Acxei The machine is sold with some spare parts such as engine / gearbox.

Condition: reconditioned (used), functionality: fully functional, Rabolini mod. Imperia D, with feeder unload, with Hot Foil System 2 advances Size 80/120 cm, Pneumatich clutch, Lateral register square 3 work mode, 6 sector HOT PLATE Original HOT FOIL SYSTEM WITH 2 advances, Feeder original RABOLINI, Djdpfx Aotp T Hxecxski Review machine.

Condition: good (used), This machine combines in a unique way mixer, cutter and emulsifier in a closed system. The advantages are obvious: – space-saving by compact design, – complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, – stable end product with reproducible quality by fully automatic process control, – the possibility for direct and indirect heating and cooling, – the possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarsegrained small pieces. In short: Time and cost saving with improved product quality. Capacity 900 l Voltage Electrical: 400V 50Hz 3N Installed Power 2x106 kW + 132 kW Main material Stainlees Steel Tank with mixer 2000 ltr Djdpfjm Drylox Acxjki

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1604011, input voltage: 220 V, Used automatic bread slicer, MFG 2018; make as SINMAG; model: SM52-D (11 mm); S/N: 1604011 This bread slicer has been carefully designed to serve today’s bakery. This machine is used for slicing toast and baguettes. It saves labour that only one person is needed for the operation. Ensure that bread is neatly and accurately sliced up. This machine is suitable for slicing bread with a maximum dimension of 440 x 160 mm. The Standard slicing thickness is 11 mm, but also this dimension can be customized from 9 to 48 steel knifes if needed. Amperage: 1.6 A Volts: 220 V Frequency 50 Hz Power supply: 0,55 kW Noise level during operation < 70 db Surround Environment temperature 5 to 40°C Surround relative Humidity 30%-95% with plastic crumb tray Outside dimensions: length 600 mm x depth 730 mm x height 1210 mm Machine weight 180 kg This machine is in excellent condition like new. Dedpswyvuqjfx Acxoki Video: Price Euro 1.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2024, condition: used, functionality: fully functional, Maximum paper feed size ( mm ): 1320*980mm Minimum paper feed size( mm ): 350x450mm Maximum die cutting size( mm ): 1300x960mm Minimum mouth size( mm ): 8mm Maximum die cutting pressure( T ): 350N/cm² Machinable paper( mm ): 200-2000g/ m² / 10mm (max thickness) Die cutting accuracy( mm ): ±0.1mm Maximum speed(sheets/hour): 5500 sheets/h Maximum stack height of paper feed(mm): 1400mm (above the level) Minimum stack height for receiving paper(mm): 1250mm (above the level) Dsdow Rwipspfx Acxoki Gross power(KW): 18.5kw Machine weight(T): 19 T Overall dimension: 7500x2200x2250mm

Condition: excellent (used), Year of construction: 2016, Soma Bulldog die-cutter machine 75-90mm cutting die tools Dsdpfxsxnl N Do Acxski

Condition: used, mileage: 153,403 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,320 mm, first registration: 02/2021, fuel tank capacity: 71 l, CO₂ emissions: 266 g/km, color: white, number of seats: 2, number of previous owners: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, onboard computer, sliding door, General information Number of doors: 5 Model range: Jun 2018 - Dec 2021 Cab: single Technical information Torque: 300 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Transmission: 7 gears, Automatic Measures length/height: L3H2 Dimensions (LxBxH): 697 x 202 x 283 cm Weights Empty weight: 2.307 kg Carrying capacity: 893 kg GVW: 3.200 kg Interior Interior: black Environment Emission class: Euro 6d Consumption Average fuel consumption: 7,8 l/100km (36 MPG) Urban fuel consumption: 7,5 l/100km (38 MPG) Extra urban fuel consumption: 8 l/100km (35 MPG) Maintenance, history and condition Dksdpfx Acjyiyxqsxji Service history: Present Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, joint cutter type CF 16.1D Dedjhzzb Rspfx Acxeki -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm -Weight: 250 kg

Year of construction: 1980, condition: good (used), Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 Dkedpob A Hv Djfx Acxsi -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Dksdpfsq Dzi Tsx Acxsi Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. Dkjdpfjyq Tb Iex Acxoi This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Dedev R I D Hjpfx Acxeki Never Used / New Model RCP-141 To include Capper Feeder & automatic capper machine