Used Asg 30 for sale (25,108)

Condition: good (used), Year of construction: 2011, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 406mm, Lhsdpfx Aoy Tkabeklel 660mm maximum cutting length, 51mm Bar capacity main spindle, 30Hp 4,000rpm main spindle speed, Sub-spindle speed 4,000rpm, 20Hp power, milling speed 6,000rpm, 12 Station turret, swarf conveyor, tool setter, coolant

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Lhodozux Tpepfx Aklsl Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications Lhedpfx Akszuy A Sjlol - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 feed 10/5 m/min Table 3000 x 2000 mm control FANUC Lhjdpezmitkjfx Akljl dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, power: 22.5 kW (30.59 HP), Equipment: documentation/manual, We offer a mobile, screw-type diesel compressor – CompAir Z30/B. Output: 22.6 kW – 3000 l/min. The compressor has undergone an oil, filter, and air separator replacement. Lhsdpfoz Dik Uox Aklsl The compressor is in excellent condition, fully functional, and free of defects. Large and small service manuals are included. Operating hours: 3595 Year of manufacture: 2004

Condition: used, Year of construction: 2012, operating hours: 20,233 h, Used Tetra Pak Cap Applicator 30/Flex for Helicap23 2012 The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a capping machine designed and manufactured by Tetra Pak® in 2012. This machine is specifically designed for applying plastic screw caps onto containers, ensuring secure sealing and efficient production. With a speed of 9600 bottles per hour (BPH), it offers a high-capacity solution for the packaging industry. Specifications: Manufacturer: Tetra Pak® Model: 30 Flex For Helicap 23 Year: 2012 Speed: 9600 BPH Lhjdpfxevgufpo Aklsl This capping machine in suitable for 1000 slim format Cap Type and Rotation Direction: The capping machine is compatible with plastic screw caps, providing a reliable closure mechanism. The rotation direction of the machine is clockwise, ensuring proper application of the caps onto the containers. Current State and Safety Features: Currently, the Tetra Pak Cap Applicator 30/Flex for Helicap23 is in storage. It is equipped with safety features to ensure the well-being of operators and maintain a safe working environment. Manuals and Machine Hours: Accompanying the machine are the necessary manuals, which provide instructions for its operation, maintenance, and troubleshooting. These resources facilitate efficient usage and upkeep of the capping machine. As for its usage history, the machine has been operated for approximately 20,233 hours. Electrical Data: The machine requires an electrical supply of V: 400, kW: 6.7, and operates at a frequency of 60 Hz. These specifications ensure the machine’s optimal performance and power consumption within the specified parameters. Conclusion The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a reliable capping machine manufactured by Tetra Pak® in 2012. With its capability to apply plastic screw caps at a speed of 9600 BPH, it offers a high-capacity solution for efficient packaging processes. Equipped with safety features and accompanied by manuals, this capping machine is designed to provide secure sealing and consistent performance, making it a valuable asset for the packaging industry.

Condition: used, Year of construction: 2012, operating hours: 43,373 h, machine/vehicle number: TP116, Used Cap Applicator – Overview This used cap applicator, manufactured by Tetrapak, is designed for high-speed application of plastic screw caps onto carton packages in industrial packaging and beverage production environments. The Cap 30 Speed model supports efficient cap application at up to 12,000 caps per hour, making it a reliable choice for a second hand or used bottling line where consistent throughput and precise cap placement are critical. It is well suited for integration into modern packaging machinery setups and can operate as part of a larger used bottling line for beverage production. Engineered for accuracy and repeatability, the machine is compatible with Helicap 23 closures, commonly used in carton packaging applications. Its robust construction and proven Tetrapak engineering ensure stable performance for producers seeking to optimize industrial packaging efficiency without compromising quality. With testing available, this unit offers confidence in readiness and operational reliability. Technical Specifications & Performance Data Manufacturer: Tetrapak Model: Cap 30 Speed Alternate reference: Cap30 Speed Year: 2012 Production speed: up to 12,000 caps/hour Cap system: Helicap 23 (plastic screw cap) Cap size: 23mm Container type: Carton packages Lhjdpfx Aex H Tc Ejklel Advanced Automation & Control Systems The Cap 30 Speed is built for dependable, automated operation within demanding production schedules. Typical features include an intuitive operator interface for quick setup and monitoring, integrated safety logic, and precise actuation for consistent cap positioning. Designed for high uptime, the machine supports streamlined changeovers and consistent application pressure, helping maintain output quality and reduce stoppages across extended shifts in beverage production. Production Line Integration Capabilities This cap applicator integrates efficiently into upstream and downstream equipment within a used bottling line or complete packaging system. It can be configured for inline operation with conveyors and synchronization signals for smooth product flow. The Helicap 23 compatibility supports widely used carton formats, making it a strong fit for industrial packaging lines that require dependable throughputs and minimal bottlenecks. Its footprint and connection points are suitable for common layout configurations, and it can operate as a standalone station or as part of a synchronized multi-machine line. Machine Condition & Maintenance History The applicator is available with the possibility to test the machine, indicating readiness for operation and providing assurance of functional performance. As a second hand solution, it represents a cost-effective option for facilities seeking dependable capping capability with verifiable operation prior to installation. Operational Performance & Versatility At 12,000 caps per hour, the machine delivers consistent performance for high-volume carton capping in beverage production. Helicap 23 compatibility ensures secure, repeatable application of plastic screw caps. Its stable mechanical design and precise application mechanism help maintain package integrity, reduce rejec...

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 Lodpohmmfkofx Aklohl - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Year of construction: 2013, fuel type: electric, Mast: articulated arm Lhedpezfkntefx Aklsl Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2012, fuel type: electric, Mast: articulated arm Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Lodpjzfkvkjfx Aklohl

Condition: used, Year of construction: 2012, fuel type: electric, Mast: articulated arm Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Lhsdpfx Aozflg Roklel

Condition: used, Year of construction: 2013, fuel type: electric, Mast: articulated arm Lhodpfx Aezfm Rdjklsl Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information

Condition: new, functionality: fully functional, machine/vehicle number: G30C25, overall weight: 33 kg, operating pressure: 207 bar, compressed air connection: 7 bar, Air-assisted 30:1 Merkur complete system: - Incl. Airmix spray gun PerformAA 50 - Chassis mounting - Incl. spray gun air-material hose, material filter - Permissible material operating pressure: 207 bar - Max. air inlet pressure: 7 bar - Max. material flow rate: 1.5 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Sales notes: Sales exclusively to business customers. No sales to private customers. Sales and delivery exclusively within the EU – no sales to third countries. Lhodszv S T Ejpfx Akljl Delivery conditions and shipping costs based on individual effort and agreement. The sale is made with the exclusion of any warranty. Are you looking for other machines or similar products? Please do not hesitate to contact us. At Oltrogge, we regularly have a wide range of new and used machines as well as other products from our technical product range available. We will gladly check if we can offer you a suitable alternative.

Condition: excellent (used), Year of construction: 1999, LVD PPEB110/30 CAD-CNC 110T Serial number: 26225 Year of manufacture: 1999 Bending length: 3050 mm Servohydraulic bending system Lodpjzzafgefx Akljhl Precise slider positioning using a linear encoder Suitable for precise sheet metal bending.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 8,907 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: telescopic, construction height: 2,900 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 250/60 - 12, rear tire type: superelastic tires (black), rear tire size: 180/70 - 8, overall weight: 5,285 kg, total height: 2,900 mm, total length: 2,350 mm, total width: 1,300 mm, fuel: electricity, Equipment: cabin, STILL RX 60-30 / 6323 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.650 mm Closed height: 2.900 mm Mast: Standard (2W465) Fork length: 1.200 mm Fork carriage: 3A Drive: Elektro Battery: 80 V 620 Ah (2017) Charger: 80 V - not tested Tyres: Superelastik 250/60 - 12 (40%) / 180/70 - 8 (25%) Service weight: 5.285 kg Length: 2.350 mm Width: 1.300 mm Year of manufacture: 2009 Operating hours: 8.907 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin Lhjdpfx Akjz Aptijlel Internal no.: 1308860 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 09/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle number: G400133 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Langendorf SATÜ 30-10.0 M Low-Loader | 3 Axles | Wheel Recesses | 36,540 kg Payload For sale is a used Langendorf SATÜ 30-10.0 M low-loader semi-trailer, manufactured in 2020. The trailer features wheel recesses, remote control, and three axles, including two steering axles and one lift axle. With a 10,000 mm loading platform and a technical payload of 36,540 kg, the low-loader is ideal for transporting construction machinery, wheel loaders, excavators, and other heavy equipment. Technical data: * Manufacturer/Model: Langendorf SATÜ 30-10.0 M * Vehicle type: Low-loader semi-trailer * First registration: 06/2020 * Year of manufacture: 2020 * Axles: 3 * Two steering axles * One lift axle * Overall length: 13,900 mm * Loading platform length: 10,000 mm * Technically permissible gross weight: 48,500 kg * Unladen weight: 11,960 kg * Payload: 36,540 kg * Wheel recesses * Remote control * Technical inspection: New * Vehicle number: G400133 * Condition: Used * German vehicle Inspection possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale reserved. Financing example: * Internal number: G400133 * Purchase price: €57,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €899.02 * Residual value: €11,380.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Lhsdpey A Uxaefx Aklol Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 6,428 kg, construction height: 2,050 mm, fuel type: electric, total length: 5,110 mm, drive type: Elektro, construction width: 1,190 mm, working height: 11,140 mm, Articulated telescopic platform Lsdpoxg U Hcsfx Akljhl Technical condition: New

Condition: as good as new (ex-display), Year of construction: 2016, Motion06 angled-belt conveyor 30° 1615-1150-1050 RA1338 Exhibit Make: Motion06 Year of manufacture: 2017 Inlet angle: 30 Length: 1830 mm angle inlet and 700 mm full width, total length 2530 mm Belt width (RB): 1050 mm ( 20x 40 mm ) Frame height: 150 mm Nominal/external width (NB): 1150 mm Adjusted height: 560 mm Conveying speed: V230/400 kW 0,75 Overall height side wall: 300 mm Scope of delivery: with motor, supports and side guides (if required, please ask) For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Lhsdpfjk Abhtjx Aklsl Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2022, Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Lodpfouf Hx Tsx Akljhl Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Lhodpjv Nhx Uefx Aklsl Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 30 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,800 mm, gearing type: automatic, battery capacity: 270 Ah, battery voltage: 24 V, fork carriage width: 815 mm, fork length: 1,010 mm, fork width: 100 mm, fork thickness: 30 mm, ground clearance: 30 mm, tire condition: 100 %, overall weight: 4,200 kg, empty load weight: 2,700 kg, total height: 2,800 mm, total length: 1,950 mm, total width: 1,512 mm, color: yellow, Equipment: pallet forks, 🔍 Looking for a Reliable Forklift? We Are Industry Experts! Lhodpfx Asz D Tm Teklel We specialize in selling high-quality forklifts, offering tested machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! 🚜💼 🔥 In this listing, we present: 🚀 COMBILIFT WR-4 - ELECTRIC ⚡ - DUPLEX 4500mm 📏 - Year 2017 🏷️ - ONLY 30 MTH ⏳ - FREE LIFT 🎯 - CONDITION 5/5 🌟 - LIKE NEW! 🏆 This forklift is in excellent technical condition, ready for immediate use. ⚙️🔧 📌 Key Features and Technical Data: 📍 Model: COMBILIFT WR-4 📍 Year of manufacture: 2017 🏗️ 📍 Lifting capacity: 1500 kg 🏋️‍♂️ 📍 Operating hours: 30 MTH ⏱️ 📍 Mast type: Duplex 🚜 📍 Lifting height: 4500 mm 📏 📍 Drive type: Electric ⚡ 📍 Load center: 600 mm 🎯 📍 Total weight: 2700 kg ⚖️ 📍 Tires: Solid, like new 🛞🔄 📍 Overall height (collapsed mast): 2800 mm 📐 📍 Technical condition: Fault-free, after a service inspection 🛠️ 📍 Visual condition: Very good 👌 📍 Fork length: 1010 mm 🔩 📍 Free lift: 1500 mm 📈 📍 Overall height: 2800 mm 📊 📍 Total length: 1950 mm 📏 📍 Total width: 1290 mm 📐 📍 Positioner width: 815 mm 🔧 🎯 Equipment Included: 🔋 Battery 🦾 Pallet forks This forklift is the perfect solution for industries that require efficient handling of long loads in narrow spaces, such as the wood 🪵, steel 🏗️, or pipe 🏭 industry. Thanks to its multi-directional movement function 🔄, the forklift ensures easy maneuverability and optimal warehouse space utilization 📦🚛. 🚀 Additional Features: ✔ Integrated multi-directional steering system 🔄 ✔ Comfortable operator cabin 🛋️ ✔ High reliability in intensive use 🔝 ✔ Suitable for both outdoor 🌞 and indoor 🏠 warehouse operations 🛠️ Condition: ✅ Fully functional ✅ Regularly serviced ✅ Ready for immediate work! 🚛💨 📦 We offer transport across Europe 🌍 and provide a FREE initial inspection 🆓! 💰 Pricing & Formalities: 💳 We provide full support for financing options, including quick leasing and credit approvals 💰, even for new businesses 🚀 or companies in challenging financial situations. ✔ Leasing decision in just 2 hours! ⏳ ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & start-up program for new businesses 🚀 ✔ We are an authorized supplier for most leasing companies 🏦 ⚡ FAST / SIMPLE / AFFORDABLE FINANCING 💼

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,043 h, load capacity: 3,000 kg, lifting height: 6,450 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,955 kg, total height: 2,600 mm, total length: 2,850 mm, total width: 1,250 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, LINDE H 30 T -02 – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 6.450 mm Closed height: 2.600 mm Free lift: 1.800 mm Mast: Triplex (3F645) Fork length: 1.200 mm Fork carriage: FEM 3 A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (20%) / 23 x 9 - 10 (60%) Service weight: 4.955 kg Length: 2.850 mm Width: 1.250 mm Year of manufacture: 2015 Operating hours: 11.043 h Condition: working condition Lodpfx Ajz Ap Nwjkljhl EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Double clamp, Sideshift, Double pallet clamp Internal no.: 1202070 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. Lodpfx Akowkpvvolehl With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28478-01/1/B, conveyor belt length: 3,000 mm, conveyor belt width: 300 mm, total length: 3,100 mm, total width: 350 mm, overall weight: 70 kg, power: 0.21 kW (0.29 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Length: 300 cm Width: 30 cm Height of the supports: 1 cm Lhjdpjz Eg R Uefx Aklel Height-adjustable conveyor belt

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status Lodpfx Aoy T Ixneklshl - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg