Used Asg 30 for sale (24,338)

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) Gjdpfx Ahjzt Avrsmjbr • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: good (used), Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope, sling rope -Crane rope: steel wire rope DIN 3088 Ø 16 mm -Length: 30 m -other crane ropes also available Gedpfx Ajzr Utyehmsbr -Transport dimensions: Ø 640 x 100 mm -Weight: 24.6 kg

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,735 mm, fuel type: diesel, mast type: triplex, construction height: 2,505 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load centre: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Condition: New unit Technical condition: New Front tyres type: Superelastic Front tyres size: 28x9-15 Rear tyres type: Superelastic Rear tyres size: 6.50-10 Gbjdpfxoynpdae Ahmjr Description: In addition to this unit, we also offer other forklifts and warehouse equipment. All our machines are workshop-inspected and checked in accordance with FEM 4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Hire purchase and financing under favourable conditions are available on request. We will be pleased to offer you professional and detailed advice on our vehicles. Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, interior mirror, exterior mirror, beacon, windscreen wiper, single pedal, LED, seat,

Year of construction: 2025, condition: new, Eppendorf 5804 centrifuge, including FA-45-6-30 rotor. Gbjdpfxjztmfke Ahmjr Both items are new and have not been used.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 21,000 kg, number of seats: 2, Year of construction: 2002, operating hours: 6,681 h, Terex TA 30 Dumper/6x6/Rear tailgate/Air conditioning/Heated dump body/6681 operating hours • Manufacturer: Terex • Type: TA30 • Year of manufacture: 2002 Gbedpfxezt Sizs Ahmer • Operating hours: 6681 hours • Power: 261 kW/355 hp • Engine: 6-cylinder diesel Cummins QSM11 engine • 2 seats • Air conditioning • 6x6 all-wheel drive • Heated dump body • Dump body volume: approx. 16 m³ • Hydraulic rear tailgate • Tires in good condition • Transport length: 10 m • Transport width: 3 m • Transport height: 3.45 m • Total weight: 21000 kg • 1 owner • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 9,290 mm, total width: 2,470 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 7,460 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Gbjdpfsztrhdjx Ahmsr Axle configuration Tyre size: 385/65 Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Make axles: BPW; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg; Make axles: BPW; Tyre profile: 30% Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.983 kg Carrying capacity: 37.017 kg GVW: 41.000 kg Identification Registration number: OJ-16-YP

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 9,290 mm, total width: 2,470 mm, wheelbase: 7,460 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Drum brakes = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.983 kg Gbjdpfx Aoztrgyohmjr Carrying capacity: 37.017 kg GVW: 41.000 kg Registration number: OJ-12-YP

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 9,290 mm, total width: 2,470 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 7,460 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg Gedjztrggspfx Ahmjbr Weights Empty weight: 3.983 kg Carrying capacity: 37.017 kg GVW: 41.000 kg Identification Registration number: OJ-15-YP

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 8,458 h, load capacity: 3,000 kg, lifting height: 3,850 mm, load center: 500 mm, fuel type: diesel, motor manufacturer: VW, DGUV certified until: 08/2027, fork length: 1,200 mm, total height: 2,680 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Linde H 30 D-01 diesel forklift with the following specifications: * Operating hours: 8,458 * Lifting capacity: 3,000 kg * Lifting height: 3,850 mm * Overall height: 2,680 mm * Year of manufacture: 2011 Godpjzrr Injfx Ahmobr LINDE 3.0-ton diesel forklift with a full cabin, good front tires – new rear tires, telescopic mast for unobstructed visibility, side shift, mini-lever, two-pedal control, front and rear lighting, fork length 1,200 mm. Includes a 1,000-hour service according to LINDE manufacturer specifications, new timing belt, and new water pump, as well as a valid UVV inspection. We would be happy to arrange a viewing, demonstration, and test drive by appointment. Sales are exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively using our own ramp-type low-loader (transport costs upon request). You can find more information and offers on our website!

Condition: used, Year of construction: 1987, pressure 100 t Working width max. 300 mm serial number 55505 voltage 380 V weight 5000 kg Godszr Rq Uopfx Ahmjbr

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF47 DRN80M4/DI/KD1/TF/E18Z i 47.75 -Speed: 30 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection rating: IP54 -Number: 4x geared motors available -Price: per piece -Dimensions: 510/230/H200 mm -Weight: 28 kg/pc. Gjdpexl Sbnjfx Ahmobr

Condition: excellent (used), Year of construction: 2022, operating hours: 205 h, lifting height: 4,800 mm, fuel type: gas, mast type: triplex, total height: 2,230 mm, total length: 2,900 mm, total width: 1,200 mm, color: other, Empty weight: 4.750 kg Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Gjdpfxjx U Ep Tj Ahmsbr Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Freelift - Side shift - Work lamp(s) = Remarks = General Country of production: China Condition CE type: CE

Condition: excellent (used), Year of construction: 2020, operating hours: 6,292 h, lifting height: 5,150 mm, fuel type: gas, mast type: duplex, power: 39 kW (53.03 HP), total height: 3,300 mm, total length: 2,850 mm, total width: 1,250 mm, color: other, Empty weight: 4.790 kg Lifting capacity: 3.000 kg CE mark: yes Godpfx Ahjxvl Dwsmobr Technical condition: very good Visual appearance: very good = Additional options and accessories = - 4th Hydr. circuit - Beacon(s) - Blower - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE Fork positioner & side shift, Closed cabin with heating, New rear tires

Condition: excellent (used), Year of construction: 2018, operating hours: 4,712 h, lifting height: 4,190 mm, fuel type: electric, mast type: duplex, total height: 2,710 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Empty weight: 5.408 kg Battery: 38 kWh CE mark: yes Technical condition: very good Visual appearance: very good Damages: none = Additional options and accessories = - 3rd hydr. circuit Gbsdpfsy U Urqex Ahmsr - Beacon(s) - Blower - Pallet forks - Side shift - Work lamp(s)

Condition: excellent (used), Year of construction: 2024, operating hours: 6,465 h, lifting height: 5,150 mm, fuel type: electric, mast type: triplex, battery voltage: 80 V, fork length: 1,800 mm, total height: 2,330 mm, total length: 2,600 mm, total width: 1,450 mm, color: other, Empty weight: 5.177 kg Battery type: PzS Lifting capacity: 3.000 kg Supply voltage: 80 V CE mark: yes Technical condition: very good Visual appearance: very good Godpfx Aozmdnishmsbr = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Pallet forks - Side shift - Work lamp(s) = Remarks = General Country of production: Duitsland Durwen fork clamp with independent side shift, 1800 mm forks, Triplex mast with freelift, non-marking tires, road lighting

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, Gbedpozh I Agsfx Ahmor 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Gjdpfjzh Hvxex Ahmjbr Spindle speed 15,000 rpm, input 15Kw, Hurco Winmax 5 Control, Spindle taper BT40, 30 ATC, Coolant, Low volt light, Swarf Conveyor.

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Year: 1982 Serial number: 3837 FEATURES: – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation Gbodpfx Ajy S Akpehmjr – Precision machine – Equipment visible in the photos

Condition: good (used), Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Quantity: 30x chain hoists -various manufacturers: Yale, Brand, BKS -Load capacity: from 750-3200 kg -Chain length 1.0-2.5 m -Price/Sale: complete -mostly functional -Dimensions: 1200/800/H600 mm -Weight including packaging: 600 kg Gbjdpfx Ahob A Rkhjmor

Condition: used, axle configuration: 3 axles, first registration: 07/2015, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2015, Axle configuration Gjdpfx Aozrbdfohmebr Tire size: 385/65 R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Rear axle 2: Aluminum rims; Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Rear axle 3: Aluminum rims; Tire tread depth left: 8 mm; Tire tread depth right: 9 mm Weights Unladen weight: 3,910 kg Payload: 35,090 kg GVWR: 39,000 kg Condition Damage: None

Condition: used, axle configuration: 3 axles, first registration: 11/2017, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2017, Axle configuration Tyre size: 385/65 R22.5 Axle make: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: tyre tread left: 12 mm; tyre tread right: 3 mm Rear axle 2: tyre tread left: 12 mm; tyre tread right: 15 mm Rear axle 3: tyre tread left: 11 mm; tyre tread right: 10 mm Weights Unladen weight: 3,740 kg Payload: 35,260 kg Gross vehicle weight: 39,000 kg Gbjdpfx Ahszrba Tjmsr Condition Damages: none

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 Cycle Lathe (2011) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2011 Condition: very good, used, optional with new maintenance before delivery Center distance 750 Swinging diameter over bed 330mm Swinging diameter over cross slide 160mm Travel of cross slide 180mm Gbjdpfoztyqmjx Ahmjr Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing 70mm Spindle bore 40.5mm Internal taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7kW Total speed range 1 – 4,500 rpm Feed force longitudinal 6,000N Feed force facing 3,000N Feed range 0.001 – 10 mm/rev Rapid traverse rate longitudinal/facing 6/3 m/min Metric threads 0.1 – 400mm Inch threads 56 – 1/4 G/inch Module threads 0.125 – 28mm DP threads 224 – 1 Dp Max. number of thread starts 99 Tailstock diameter 50mm Tailstock travel 130mm Internal taper of the tailstock MK3 Length 1750mm Width 1350mm Height 1670mm Weight 1300kg Scope of delivery Chuck Multifix including 17 tool holders Machine lamp Coolant system Machine feet Original documentation Drawer cabinet

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 stator knives: 2 Godpfx Ajztmz Sohmsbr Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Gbedpsztmyusfx Ahmsr Rotor knives: 9

Condition: like new (used), Year of construction: 2023, RHTC hydraulic workshop press HF-2 in good condition. Specifications: Pressing force: 30 tons Maximum pressure: 374.6 bar Gedezivkzopfx Ahmjbr Cylinder stroke: 160 mm System capacity: 1.65 liters Fixed cylinder Working width: 565 mm Weight: 165 kg Professional quality, suitable for pressing bearings, bushings, axles, and other workshop tasks. Laser roller stand also for sale. Price: €1,250 excluding VAT.