Used Arunda Template for sale (128)

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Kedpowx Dcyofx Ag Usll Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: used, color: other, first registration: 01/2008, Year of construction: 2008, Serial number: UNKNOWN NO TEMPLATE We have a stock of >100 axles. Kjdpsybaafjfx Ag Uell Please contact us if you can't find what you are looking for.

Condition: new, Paving stock sorting cart with templates for mechanical paving clamp. Kjdpfjyavd Rex Ag Uell State: New

Year of construction: 2000, condition: ready for operation (used), This ERREBI TM5 was manufactured in 2000. Designed for wooden pallet and packaging production, it operates on multiple workstations for simultaneous component nailing. Featuring a CNC system, it ensures all movements are controlled with no manual adjustments needed, allowing quick format changes. Optional tools like drills and saws can be added. Contact us for more information about this machine. Klsdpfx Agjx D Eabs Usl • Model: TM5 CNC nailing machine for wooden pallets and packaging • Multi-station operation: works on two or more workstations • Capabilities: repeated production of the same component or simultaneous nailing of different parts • Control: CNC-managed movements with no manual adjustments required • Quick changeover: formats recalled from CNC memory for fast setup • Setup aids: production can start in minutes using jigs/templates Additional equipment • Optional tools: drills, milling units, circular saws, and other equipment • Auxiliary tooling/fixtures: semi-automatic jigs or pre-mounted templates (if available)

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Machine Benefits Technical Machine Benefits Kjdpfxeyaiyre Ag Uoll • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,780 mm, travel distance Y-axis: 1,951 mm, travel distance Z-axis: 155 mm, number of axes: 3, This 3-axis Weeke Optimat BHP Vantage 34M was manufactured in 2008. Ideal for precision CNC routing, this machine offers robust construction and reliable performance. If you are looking to get high-quality routing capabilities, consider the Weeke Optimat BHP Vantage 34M machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Work table dimensions: 3100 x 1550 mm • Max workpiece thickness: 80 mm • Design: stable gantry design with dust-protected linear guide system Klsdjyaimrspfx Ag Uel • Drive technology: maintenance-free motors and automatic central lubrication Extra Information Tools Drilling Unit Specs: Spindle Speed: 1500 - 7500 rpm Drive Power: 2.7 kW Max Drill Diameter: 35 mm Milling Spindle Specs: High Spindle Speed: 1250 - 24000 rpm Max Power: up to 7.5 / 9 kW in continuous/intermittent operation (S1/S6-50%) Control Unit Control System: Modern PC-based control Hardware: Operating System: Windows XP Embedded TFT Flat Screen: 17 inches Connectivity: USB, EtherNet 10/100 MBIT RJ45 Table Matrix Table: 10'/5', with grooves for templates and vacuum suction cups Vacuum System: 500/600 m³/h, 50/60 Hz Finally, the machine offers a comprehensive software suite for CNC programming and operation, including woodWOP and 3D NC simulation capabilities.

Condition: good (used), Year of construction: 2004, Large milling area despite compact construction Copy milling machines with lateral stops or a template in 1:1 ratio Two-stage pneumatic copying finger for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Kodex Rixkspfx Ag Uell Simple tool change with "Spindle lock" Pneumatic material clamping device Spray device with dosing

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Kledjxhf Tiopfx Ag Uel Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for a Mast Uri Well. The unit is in full working condition and is ready for immediate release. The Mast Uri Well is a cutting-edge dispensing aid that features a 96 LED template, specifically designed for the streamlined transfer of urine samples in the diagnostic process for urinary tract infections (UTIs). Key Features: 96-Well Template: The innovative design allows for efficient sample transfer across 96 wells simultaneously, facilitating bacterial identification and antibiotic susceptibility testing (AST). Semi-Automated Solution: Integrates seamlessly into the Mast Uri System, combining manual and automated processes for optimal laboratory performance. Benefits: Increased Efficiency: Klsdpjxxy S Iofx Ag Usl Automating the sample transfer minimizes manual handling, decreasing the time spent on sample preparation and allowing lab technicians to focus on other critical tasks. Improved Accuracy: The precise placement provided by the 96-well template minimizes risks of contamination and mis-identification of samples, ensuring reliable results crucial for patient outcomes. Enhanced Throughput: The streamlined workflow enables laboratories to process a higher volume of samples in shorter turnaround times, essential for timely diagnosis and treatment of UTIs. Cost Savings: By reducing the need for manual handling and minimizing waste through efficient sample management, the Mast Uri Well contributes to overall cost reductions in laboratory operations.

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Klodpfx Aoxqqyysg Usl Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Kledpfewka Ntex Ag Uol Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, color: other, first registration: 07/2010, Year of construction: 2010, Serial number: no template We have a stock of >100 axles. Kodpfxswx Ixlo Ag Ujll Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 08/2006, Year of construction: 2008, Serial number: NO TEMPLATE We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Kedpfxsw Tku Ds Ag Usll

Condition: used, color: other, first registration: 07/1995, Year of construction: 1995, Serial number: NO TEMPLATE We have a stock of >100 axles. Klodpfx Aswx I Sreg Uel Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2005, Year of construction: 2005, Serial number: NO TEMPLATE We have a stock of >100 axles. Kljdpewx Nd Aefx Ag Uol Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 08/2006, Year of construction: 2006, Serial number: UNKNOWN NO TEMPLATE. Klodpfx Agew Tkvus Ujl We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 09/2005, Year of construction: 2005, Serial number: no template We have a stock of >100 axles. Kledpfoxf Iqxjx Ag Ujl Please contact us if you can't find what you are looking for.

Year of construction: 2007, condition: used, Year of manufacture: Dec 2007 New: No Ksdpjx An Dgsfx Ag Usll Serial number: see template. 3 used Terminal tractors for spare parts , Terberg 282 and 283 from 2007 and 2012. only missing small parts.

Condition: used, color: other, first registration: 07/2005, Year of construction: 2004, Serial number: NO TEMPLATE Klsdpow Emxkefx Ag Uol We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2000, Year of construction: 2000, Serial number: NO TEMPLATE We have a stock of >100 axles. Kedewx Nhzspfx Ag Usll Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 09/2005, Year of construction: 2005, Serial number: no template Ksdpfxoxf Irvs Ag Ujll We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting Kjdpfx Ajxak H Eeg Uoll There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue Kljdpfxsxak D Rs Ag Uel - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist Kledjxak Hxopfx Ag Ujl - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Kodpfx Aoxzg Ubeg Uell Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max